Lithographic Patterning of Nanoscale Arrays of the Oxidase Enzyme CotA: Effects on Activity and Stability

Abstract This study compares the enzymatic activity of nanoscale arrays bearing the oxidase CotA that are produced by two lithographic methods: polymer pen lithography (PPL), a scanning probe lithography for small‐area fabrication (≈1 cm²); and stepper photolithography, a large‐scale method (>300 cm²) used in the microelectronics sector. In both cases, arrays of 600 nm gold features are produced and functionalized with CotA through a bioconjugation method that gives uniform protein orientation. The enzyme activity of these arrays is then quantified over 100 days. The enzyme arrays produced by photolithography give higher oxidation activities immediately after fabrication but degrade more rapidly when compared to those produced by PPL. This result is due to the poorer passivation on the bulk surface of photolithographically produced arrays, resulting in a greater amount of non‐specifically adsorbed enzymes. However, once the results are adjusted to account for the differences in passivation and surface area, it is found that the enzymes immobilized on the gold features give essentially the same activity regardless of the lithographic method used. Thus, these results suggest PPL is a suitable method for prototyping biodevices prior to scale‐up, provided that due consideration is given to the design of the fabricated features.