journal article·2025-02Open access

Effect of Epoxy Conductive Adhesive on Film Deformation During the Thermoforming Process for In‐Mold Electronic Devices

Francisco Ituriel Arias‐García, Nekane Lozano‐Hernandez, Maria Lluisa Maspoch Ruldua, Enric Fontdecaba Baig

Advanced Materials Technologies· Volume 10· Issue 4

Abstract

Abstract In‐Mold Electronics (IME) is an innovative technology that allows the creation of 3D‐shaped electronic surfaces by combining printed electronics and In‐Mold Decoration (IMD). During the manufacturing process, the materials that integrate these devices, such as adhesive, must endure the transformation conditions of thermoforming. However, the adhesive rigidity may influence the deformation of the film during this process. In this study, both printed and hybridized samples are compared regarding their stretching and thickness reduction during the thermoforming process. The results indicate that the deformation of the hybridized samples differs from the printed ones, resulting in less stretching in areas near the adhesive, with stretching increasing as it steps away from where it is deposited. Thickness values are also affected, being greater around the adhesive and decreasing farther away. Therefore, the presence of the adhesive significantly impacts the behavior of the film during processing, a factor that must be considered in the design of IME devices to maximize the number of functional devices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Eurecat Centre Tecnològic de Catalunya Unit of Polymeric and Composites Processes Av. Universitat Autònoma 23 Cerdanyola del Vallès 08290 Spain

Universitat Politècnica de Catalunya Barcelona Tech Material Science and Engineering Department Eduard Maristany 16 Barcelona 08019 Spain

References (22)

Show source-provided references
1. 10.1109/TCPMT.2015.239101210.1109/TCPMT.2015.2391012 ↗
2. Pavel M. · Informacije MIDEM · 2005 · 35 · 228
3. 10.4028/www.scientific.net/AMM.496-500.44010.4028/www.scientific.net/AMM.496-500.440 ↗
4. 10.1109/TVCG.2016.259857010.1109/TVCG.2016.2598570 ↗
5. 10.1002/adv.2183010.1002/adv.21830 ↗
6. Klein P. · Synth. Lect. Mater. Eng. · 2009 · 1 · 1
7. 10.1007/s00170-020-05377-910.1007/s00170-020-05377-9 ↗
8. 10.3144/expresspolymlett.2019.7710.3144/expresspolymlett.2019.77 ↗
9. 10.1016/j.microrel.2013.08.02110.1016/j.microrel.2013.08.021 ↗
10. Gill M. · IPC APEX EXPO Proc · 2018
11. 10.1016/j.microrel.2021.11437310.1016/j.microrel.2021.114373 ↗
12. 10.1533/9780857093967.2.27510.1533/9780857093967.2.275 ↗
13. P.Mach D.Bušek J.Ješ In2010 IEEE 16th Internat. Symp. for Design and Technology in Electronic Packaging (SIITME) IEEE Piscataway NJ2010 pp.301–304.10.1109/SIITME.2010.5650822 ↗
14. P.Mach L.Richter A.Pietrikova presented at31st Int. Spring Seminar on Electronics Technology Budapest Hungary May2008.
15. 10.1533/9780857093967.2.30910.1533/9780857093967.2.309 ↗
16. P.Žák M.Tučan J.Urbánek inProc. of the Int. Spring Seminar on Electronics Technology IEEE Tratanska Lomnica Slovakia2011 258–261.
17. J.Schirmer M.Reichenberger S.Neermann J.Franke presented atProc. of the Int. Spring Seminar on Electronics Technology Bautzen Germany May 2021.
18. 10.1177/875608791769108810.1177/8756087917691088 ↗
19. 10.1109/JSEN.2014.237520310.1109/JSEN.2014.2375203 ↗
20. 10.1088/1361-6528/aad74d10.1088/1361-6528/aad74d ↗
21. Ayob M. · Int. J. Soft Computing · 2013 · 8 · 29
22. 10.1016/j.procs.2018.07.10710.1016/j.procs.2018.07.107 ↗