Non‐Planar Multiprocess Additive Manufacturing of Multifunctional Composites
Source abstract
Abstract
Abstract Multiprocess additive manufacturing (AM) consists of integrating different 3D printing techniques to enable the fabrication of multifunctional parts, based on their geometry and material properties. The combination of fused filament fabrication (FFF) and direct ink writing (DIW) techniques, respectively involving thermoplastics and thermosetting polymers (or composites), often focuses on planar and small‐scale applications (i.e., few cm), with limited nozzle orientation freedom for the fabrication of complex parts. Many industries, such as the aerospace sector, could benefit from the AM of lightweight multifunctional parts. For instance, one of the key aircraft components, the abradable seal coating, is applied on gas turbine engines casing to increase engine efficiency and is mechanically abraded by the rotor blades during engine startup. Abradable coatings made of thermosetting polymer could be 3D‐printed using a multiprocess to obtain more functionalities. In this work, a non‐planar multiprocess AM approach involving FFF of a complex large sandwich panel structure with low material density and large‐scale DIW of an abradable thermosetting coating with controlled porosity for sound absorption potential, and better mechanical abradability than a commercial product, is presented. This multiprocess AM approach can be used to manufacture lightweight multifunctional structural parts for the automotive or aerospace industries.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory for Multiscale Mechanics (LM²) Mechanical engineering department Polytechnique Montréal Montréal Québec H3T 1J4 Canada
Safran Paris Saclay Centre de R&D et Bureau d’étude Rue des jeunes bois Chateaufort – CS80112 Magny‐les‐Hameaux 78114 France
Funding
Natural Sciences and Engineering Research Council of Canada · Canada Foundation for Innovation
References (65)
Show source-provided references
1. 10.1126/science.aaf209310.1126/science.aaf2093 ↗
2. 2015
3. 10.1002/advs.20190230710.1002/advs.201902307 ↗
4. 10.1002/adma.20150621510.1002/adma.201506215 ↗
5. Coronel J. L. · Proc. SPIE · 2017 · 10194 · 250
6. 10.3390/mi1103023710.3390/mi11030237 ↗
7. 10.1016/j.apmt.2022.10159610.1016/j.apmt.2022.101596 ↗
8. 10.1007/s11665-021-05658-810.1007/s11665-021-05658-8 ↗
9. 10.1016/j.mtcomm.2022.10344510.1016/j.mtcomm.2022.103445 ↗
10. 10.1016/j.mechmat.2019.10313910.1016/j.mechmat.2019.103139 ↗
11. 10.1080/17452759.2021.201463610.1080/17452759.2021.2014636 ↗
12. 10.1016/j.addma.2017.07.00610.1016/j.addma.2017.07.006 ↗
13. 10.1108/RPJ-12-2015-018310.1108/RPJ-12-2015-0183 ↗
14. 10.1016/j.mser.2020.10060410.1016/j.mser.2020.100604 ↗
15. 10.1007/s11837-017-2707-x10.1007/s11837-017-2707-x ↗
16. Dubourg‐Cassagne A. · 2015
17. 10.1002/adem.20220029410.1002/adem.202200294 ↗
18. 10.1016/j.addma.2019.10081910.1016/j.addma.2019.100819 ↗
19. 10.1557/s43577-021-00079-310.1557/s43577-021-00079-3 ↗
20. 10.1080/19475411.2022.209545410.1080/19475411.2022.2095454 ↗
21. 10.1007/s00170-022-08831-y10.1007/s00170-022-08831-y ↗
22. 10.1039/D1TA04092H10.1039/D1TA04092H ↗
23. 10.1016/j.addma.2019.10096210.1016/j.addma.2019.100962 ↗
24. Pierre J. · Addit. Manuf. · 2023 · 61
25. Szczepański G. · 2023 · 4904
26. 10.1177/1099636221103701510.1177/10996362211037015 ↗
27. Türkoğlu İ. · 2022 · 1
28. 10.1016/j.surfcoat.2007.07.07610.1016/j.surfcoat.2007.07.076 ↗
29. 10.1016/j.engfailanal.2012.07.00710.1016/j.engfailanal.2012.07.007 ↗
30. 10.1016/j.wear.2012.07.00910.1016/j.wear.2012.07.009 ↗
31. 10.1016/j.wear.2014.10.00110.1016/j.wear.2014.10.001 ↗
32. 10.1007/s11071-015-2535-x10.1007/s11071-015-2535-x ↗
33. 10.1016/j.jmst.2021.07.01710.1016/j.jmst.2021.07.017 ↗
34. 10.1016/j.jmst.2020.05.07710.1016/j.jmst.2020.05.077 ↗
35. S.Wilson presented at The Future of Gas Turbine Technology 6th Int. Con. Brussels Belgium October2012.
36. 3MTMScotch‐WeldTMVoid Filling Compound EC‐3524 B/A Black 1kg Kit 2/cs https://www.3m.com/3M/en_US/p/d/b40067619/(Accessed: February 2020).
37. 10.1016/j.apacoust.2018.12.03010.1016/j.apacoust.2018.12.030 ↗
38. 10.1016/j.addma.2021.10224510.1016/j.addma.2021.102245 ↗
39. 10.1016/j.mtcomm.2018.02.03110.1016/j.mtcomm.2018.02.031 ↗
40. 10.1007/s42114-020-00183-z10.1007/s42114-020-00183-z ↗
41. 10.1016/j.rcim.2019.05.00510.1016/j.rcim.2019.05.005 ↗
42. Bhatt P. M. · Addit. Manuf. · 2020 · 31
43. 10.1115/1.404301310.1115/1.4043013 ↗
44. Silver K. · 2017 · 1
45. 10.1002/adma.20120332110.1002/adma.201203321 ↗
46. S. J.Kranz Master's thesis University of Illinois at Urbana‐Champaign 2013.
47. 10.1038/s41586-019-1736-810.1038/s41586-019-1736-8 ↗
48. 10.1016/j.addma.2021.10229410.1016/j.addma.2021.102294 ↗
49. 10.1016/j.compositesb.2023.11062710.1016/j.compositesb.2023.110627 ↗
50. Costa‐Baptista J. · Addit. Manuf. · 2022 · 55
51. Iervolino F. · 2019
52. 10.1016/j.porgcoat.2011.10.00410.1016/j.porgcoat.2011.10.004 ↗
53. Epoxy Curing Agents – Latent Curing Agents for One Component Systems.https://polymerinnovationblog.com/epoxy‐curing‐agents‐latent‐curing‐agents‐for‐one‐component‐systems/(Accessed: February 2023).
54. 10.1088/1757-899X/139/1/01204910.1088/1757-899X/139/1/012049 ↗
55. The Density of Aluminium and its Alloys – thyssenkrupp Materials (UK) https://www.thyssenkrupp‐materials.co.uk/density‐of‐aluminium.html(Accessed: March 2023).
56. 10.1016/1044-5803(95)00066-610.1016/1044-5803(95)00066-6 ↗
57. 10.1016/0257-8972(89)90046-710.1016/0257-8972(89)90046-7 ↗
58. 10.1016/j.jsv.2019.11504010.1016/j.jsv.2019.115040 ↗
59. 10.1016/j.apacoust.2020.10724410.1016/j.apacoust.2020.107244 ↗
60. 10.1016/j.addma.2021.10198410.1016/j.addma.2021.101984 ↗
61. Pelzer L. · Addit. Manuf. · 2020 · 37
62. 10.1088/0960-1317/18/11/11502010.1088/0960-1317/18/11/115020 ↗
63. 3iTT test: Anton Paar Wiki https://wiki.anton‐paar.com/ca‐en/3itt‐test/(Accessed: July 2022).
64. 10.1016/j.foodres.2015.02.00210.1016/j.foodres.2015.02.002 ↗
65. 10.1016/j.carbpol.2021.11825410.1016/j.carbpol.2021.118254 ↗