journal article·2006-09

Cleavage fracture of RPV steel following warm pre‐stressing: micromechanical analysis and interpretation through a new model

S. R. BORDET, B. TANGUY, J. BESSON, S. BUGAT, D. MOINEREAU, A. PINEAU

Publisher page

Abstract

ABSTRACT In this paper, the warm pre‐stress (WPS) effect on the cleavage fracture of an 18MND5 (A533B) RPV steel is investigated. This effect, which describes the effective enhancement of the cleavage fracture toughness at low temperature following a prior loading at high temperature, has received great interest in light of its significance in the integrity assessment of structures, such as nuclear pressure vessels, subjected to thermal transients. Several loading cycles between room temperature (RT) and −150 °C are considered: Load‐Unload‐Cool‐Fracture (LUCF), Load‐Cool‐Fracture (LCF) and Load‐Cool with Increasing K‐Fracture (LCIKF). All experiments complied with the conservative principle, which states that no fracture will occur if the applied stress intensity factor (SIF) decreases (or is held constant) while the temperature at the crack‐tip decreases, even if the fracture toughness of the virgin material is exceeded. The experimental results indicate that an effective WPS effect is present even at small pre‐load (Kwps= 40 MPa√m), and that a minimum critical slope (−ΔK/ΔT) in the LCIKF cycle has to be exceeded to induce cleavage fracture between RT and −150 °C. Numerical modelling was performed using mixed isotropic and kinematic hardening laws identified on notched tensile (NT) specimens, tested in tension to large strains (up to 40%), followed by large compressive strains. Detailed microstructural investigations on compact tensile (CT) and NT fracture test specimens were performed so as to determine the nature of the cleavage initiation sites, as well as the local mechanical conditions at fracture. Based on this local information, a new cleavage model was calibrated and applied to predict the probability of cleavage fracture after WPS: it is shown that the predictions are in good agreement with the experimental results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Yukawa S.(1969)Evaluation of periodic proof testing and warm prestressing procedures for nuclear reactor vessels. General Electric Report HSSTP‐TR‐1.10.2172/4764505 ↗
2. The use of overstressing techniques to reduce the risk of subsequent brittle fracture, Parts 1 and 2
3. 10.1016/0308-0161(83)90013-310.1016/0308-0161(83)90013-3 ↗
4. 10.1016/0308-0161(90)90120-710.1016/0308-0161(90)90120-7 ↗
5. Beremin F. M. · 1981 · 825
6. 10.1111/j.1460-2695.1996.tb00984.x10.1111/j.1460-2695.1996.tb00984.x ↗
7. 10.1111/j.1460-2695.1996.tb00985.x10.1111/j.1460-2695.1996.tb00985.x ↗
8. Roos E. · 1998 · 939
9. 10.1016/S0013-7944(00)00053-910.1016/S0013-7944(00)00053-9 ↗
10. 10.1016/S0029-5493(99)00282-410.1016/S0029-5493(99)00282-4 ↗
11. 10.1016/S0013-7944(01)00051-010.1016/S0013-7944(01)00051-0 ↗
12. 10.1016/S0029-5493(02)00067-510.1016/S0029-5493(02)00067-5 ↗
13. 10.1016/j.engfracmech.2003.09.00310.1016/j.engfracmech.2003.09.003 ↗
14. 10.1016/j.engfracmech.2003.09.00410.1016/j.engfracmech.2003.09.004 ↗
15. 10.1111/j.1460-2695.2004.00804.x10.1111/j.1460-2695.2004.00804.x ↗
16. A theory of warm prestressing: Experimental validation and the implications for elastic plastic failure criteria10.1007/BF00043121 ↗
17. 10.1007/BF0003450710.1007/BF00034507 ↗
18. 10.1016/0308-0161(90)90122-X10.1016/0308-0161(90)90122-X ↗
19. 10.1016/0022-5096(73)90008-210.1016/0022-5096(73)90008-2 ↗
20. 10.1016/S0013-7944(03)00064-X10.1016/S0013-7944(03)00064-X ↗
21. 10.1007/BF0266330210.1007/BF02663302 ↗
22. Lefevre W.andBarbier G.(1999)MPA ‐ EDF's collaboration on the warm pre‐stress effect final report part one: Characterisation of the 18MND5 steel. EDF report no. HT‐2C/99/048/A.
23. Lefevre W.andBarbier G.(1999)MPA ‐ EDF's collaboration on the warm pre‐stress effect final report part two: Warm pre‐stressing tests and numerical simulations. EDF report no. HT‐2C/99/050/A.
24. RCC‐M (2000)Design and construction rules for mechanical components of PWR reactor nuclear island. AFCEN FR.
25. ASTM E1921‐98. (1998)Standard test method for determination of reference temperature T0 for ferritic steels in the transition range. ASTM standards.
26. Bordet S. R.andTanguy B.(2005)Simulation of the WPS effect in a RPV steel. Internal report. Centre des Matériaux Ecole des Mines de Paris .
27. 10.1016/j.engfracmech.2004.02.01010.1016/j.engfracmech.2004.02.010 ↗
28. 10.1007/BF0264468510.1007/BF02644685 ↗
29. Brückner‐Foit A. · 1991 · 477
30. 10.1007/s11661-004-0083-y10.1007/s11661-004-0083-y ↗
31. 10.1007/BF0264833610.1007/BF02648336 ↗
32. 10.1016/j.msea.2003.10.28910.1016/j.msea.2003.10.289 ↗
33. Lemaitre J. · 1994
34. 10.1016/S0045-7825(96)01124-310.1016/S0045-7825(96)01124-3 ↗
35. 10.1016/j.engfracmech.2004.02.00910.1016/j.engfracmech.2004.02.009 ↗
36. Estimation procedure for the Weibull parameters used in the local approach10.1007/BF00035355 ↗
37. 10.1023/A:100752153019110.1023/A:1007521530191 ↗