journal article·2016-03-01Open access

The use of laser in garment manufacturing: an overview

Rajkishore Nayak, Rajiv Padhye

Fashion and Textiles· Volume 3· Issue 1

Abstract

Abstract Laser is being used in apparel industry from nineteenth century for various garment manufacturing applications. There are several advantages of using laser over the conventional processes in cutting, engraving, embossing, denim fading and other applications. In addition, product damage potential is reduced, no/less consumables are needed and no problem of toxic by-product disposal as found in some processes. Today’s laser equipment is a result of continuous research and development of earlier products, which has undergone several changes. The initial laser systems were cumbersome, hard to run and difficult to maintain. However, the modern laser systems are simpler in operation and maintenance. Furthermore, the earlier systems were involved with more safety issues and needed the gasses to be constantly replenished. The garment manufactures around the globe should take the advantage of laser application in the post multi-fibre agreement regime to make their products more competitive. This review focuses on the technology of laser including various classifications. In addition it includes the applications of laser in garment manufacturing, their potential hazards and health related concerns.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ocular and Laser Science Research · Laser Material Processing Techniques · Laser Applications in Dentistry and Medicine

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Ashdown, S. P., Loker, S., Schoenfelder, K., & Lyman-Clarke, L. (2004). Using 3D scans for fit analysis. Journal of Textile and Apparel, Technology and Management, 4, 1–12.
2. Bahtiyari, M. (2011). Laser modification of polyamide fabrics. Optics & Laser Technology, 43, 114–118.10.1016/j.optlastec.2010.05.014 ↗
3. Barkana, Y., & Belkin, M. (2000). Laser eye injuries. Survey of Ophthalmology, 44, 459–478.10.1016/S0039-6257(00)00112-0 ↗
4. Belli, R., Miotello, A., Mosaner, P., & Toniutti, L. (2005). Laser cleaning of ancient textiles. Applied Surface Science, 247, 369–372.10.1016/j.apsusc.2005.01.159 ↗
5. Bernstein, L. J., Kauvar, A. N., Grossman, M. C., & Geronemus, R. G. (1997). The short-and long-term side effects of carbon dioxide laser resurfacing. Dermatologic Surgery, 23, 519–525.10.1111/j.1524-4725.1997.tb00029.x ↗
6. Buckley, E. (2010). Eye-safety analysis of current laser-based scanned-beam projection systems. Journal of the Society for Information Display, 18, 944–951.10.1889/JSID18.11.944 ↗
7. Caprino, G., & Tagliaferri, V. (1988). Maximum cutting speed in laser cutting of fiber reinforced plastics. International Journal of Machine Tools and Manufacture, 28, 389–398.10.1016/0890-6955(88)90052-1 ↗
8. Cenna, A., & Mathew, P. (2002). Analysis and prediction of laser cutting parameters of fibre reinforced plastics (FRP) composite materials. International Journal of Machine Tools and Manufacture, 42, 105–113.10.1016/S0890-6955(01)00090-6 ↗
9. Choudhury, I., & Shirley, S. (2010). Laser cutting of polymeric materials: an experimental investigation. Optics & Laser Technology, 42, 503–508.10.1016/j.optlastec.2009.09.006 ↗
10. Chow, Y. F., Chan, A., & Kan, C.-W. (2012). Effect of CO2 laser irradiation on the properties of cotton fabric. Textile Research Journal, 82, 1220–1234.10.1177/0040517511429609 ↗
11. D’Apuzzo, N. (2007). 3D body scanning technology for fashion and apparel industry. In Electronic Imaging 2007 (vol. 6491, pp. 64910O–649102). International Society for Optics and Photonics.10.1117/12.703785 ↗
12. Dowden, J. (2009). The Theory of Laser Materials Processing: Heat and Mass Transfer in Modern Technology. Berlin: Springer Science & Business Media.10.1007/978-1-4020-9340-1 ↗
13. Fan, J., & Liu, F. (2000). Objective evaluation of garment seams using 3D laser scanning technology. Textile Research Journal, 70, 1025–1030.10.1177/004051750007001114 ↗
14. Henderson, R., & Schulmeister, K. (2003). Laser safety. Boca Raton: CRC Press.10.1201/9781420034042 ↗
15. Hung, O., Song, L., Chan, C., Kan, C., & Yuen, C. (2011). Using artificial neural network to predict colour properties of laser-treated 100% cotton fabric. Fibers and Polymers, 12, 1069–1076.10.1007/s12221-011-1069-1 ↗
16. Istook, C. L., & Hwang, S.-J. (2001). 3D body scanning systems with application to the apparel industry. Journal of Fashion Marketing and Management, 5, 120–132.10.1108/EUM0000000007283 ↗
17. Juciene, M., Urbelis, V., Juchnevičienė, Ž., & Čepukonė, L. (2013). The effect of laser technological parameters on the color and structure of denim fabric. Textile Research Journal. doi:10.1177/0040517513494256.10.1177/0040517513494256 ↗
18. Kan, C.-W. (2014a). CO2 laser treatment as a clean process for treating denim fabric. Journal of Cleaner Production, 66, 624–631.10.1016/j.jclepro.2013.11.054 ↗
19. Kan, C. (2014b). Colour fading effect of indigo-dyed cotton denim fabric by CO2 laser. Fibers and Polymers, 15, 426–429.10.1007/s12221-014-0426-2 ↗
20. Kan, C. (2015). Washing techniques for denim jeans (p. 313). Denim: Manufacture, Finishing and Applications.
21. Kan, C., Yuen, C., & Cheng, C. (2010). Technical study of the effect of CO2 laser surface engraving on the colour properties of denim fabric. Coloration Technology, 126, 365–371.10.1111/j.1478-4408.2010.00270.x ↗
22. Kovacs, L., Zimmermann, A., Brockmann, G., Gühring, M., Baurecht, H., Papadopulos, N., et al. (2006). Three-dimensional recording of the human face with a 3D laser scanner. Journal of Plastic, Reconstructive and Aesthetic Surgery, 59, 1193–1202.10.1016/j.bjps.2005.10.025 ↗
23. Lu, J.-M., Wang, M.-J. J., Chen, C.-W., & Wu, J.-H. (2010). The development of an intelligent system for customized clothing making. Expert Systems with Applications, 37, 799–803.10.1016/j.eswa.2009.05.089 ↗
24. Lucas, J., Belino, N., Miguel, R., Pereira, M., & Ribeiro, L. (2015). Digital printing techniques for denim jeans (p. 287). Denim: Manufacture, Finishing and Applications.
25. Mahrle, A., & Beyer, E. (2009). Theoretical aspects of fibre laser cutting. Journal of Physics. D. Applied Physics, 42, 175507.10.1088/0022-3727/42/17/175507 ↗
26. Mallik-Goswami, B., & Datta, A. K. (2000). Detecting defects in fabric with laser-based morphological image processing. Textile Research Journal, 70, 758–762.10.1177/004051750007000902 ↗
27. Mathew, J., Goswami, G., Ramakrishnan, N., & Naik, N. (1999). Parametric studies on pulsed Nd: YAG laser cutting of carbon fibre reinforced plastic composites. Journal of Materials Processing Technology, 89, 198–203.10.1016/S0924-0136(99)00011-4 ↗
28. Mursalin, T. E., Eishita, F. Z., & Islam, R. (2005). Fabric defect inspection system using neural network and microcontroller. Statistics, 50, 100.
29. Nayak, R., Chatterjee, K., Khandual, A., & Jajpura, L. (2008). Evaluation of functional finishes-An overview. Man-Made Textiles in India, 51, 131–135.
30. Nayak, R., Chatterjee, K., Khurana, G., & Khandual, A. (2007). RFID: tagging the new era. Man-Made Textiles in India, 50, 174–177.
31. Nayak, R., & Khandual, A. (2010). Application of laser in apparel industry. Colourage, 57, 85–90.
32. Nayak, R., & Padhye, R. (2014a). Antimicrobial finishes for textiles. In R. Paul (Ed.), Functional Finishes for Textiles: Improving Comfort, Performance and Protection. Amsterdam: Elsevier.
33. Nayak, R., & Padhye, R. (2014b). The care of apparel products. In R. Sinclair (Ed.), Textiles and fashion: Materials, design and technology. United Kingdom: Elsevier.
34. Nayak, R., & Padhye, R. (2014c). Introduction: the apparel industry. In R. Nayak & R. Padhye (Eds.), Garment Manufacturing Technology. Amsterdam: Elsevier.
35. Nayak, R. & Padhye, R. (2015a). Care labeling of clothing. In R. Nayak. & R. Padhye (Eds.), Garment Manufacturing Technology.Amsterdam: Elsevier10.1016/B978-1-78242-232-7.00017-5 ↗
36. Nayak, R., & Padhye, R. (2015b). Garment Manufacturing Technology. Amsterdam: Elsevier.
37. Nayak, R., Padhye, R., Dhamija, S., & Kumar, V. (2013). Sewability of air-jet textured sewing threads in denim. Journal of Textile and Apparel, Technology and Management, 8, 1–11.
38. Nayak, R., Padhye, R., & Gon, D. P. (2010). Sewing performance of stretch denim. Journal of Textile and Apparel, Technology and Management, 6(3), 1–9.
39. Nayak, R., Padhye, R., Wang, L., Chatterjee, K., Gupta, S. (2015a). The role of mass customisation in the apparel industry. International Journal of Fashion Design, Technology and Education, 8, 162–172.10.1080/17543266.2015.1045041 ↗
40. Nayak, R., Singh, A., Padhye, R., & Wang, L. (2015b). RFID in textile and clothing manufacturing: technology and challenges. Fashion and Textiles, 2, 1–16.10.1186/s40691-015-0034-9 ↗
41. Nayak, R., Padhye, R., & Wang, L. (2015c). How to dress at work. In S. Patole (Ed.), Management and Leadership–A Guide for Clinical Professionals, Germany: Springer
42. Nourbakhsh, S., & Ashjaran, A. (2012). Laser treatment of cotton fabric for durable antibacterial properties of silver nanoparticles. Materials, 5, 1247–1257.10.3390/ma5071247 ↗
43. Ondogan, Z., Pamuk, O., Ondogan, E. N., & Ozguney, A. (2005). Improving the appearance of all textile products from clothing to home textile using laser technology. Optics and Laser Technology, 37, 631–637.10.1016/j.optlastec.2004.10.001 ↗
44. Ortiz-Morales, M. N., Poterasu, M., Acosta-Ortiz, S. E., Compean, I., & Hernandez-Alvarado, M. R. (2003). A comparison between characteristics of various laser-based denim fading processes. Optics and Lasers in Engineering, 39, 15–24.10.1016/S0143-8166(02)00073-8 ↗
45. Ozguney, A. T. (2007). The comparison of laser surface designing and pigment printing methods for the product quality. Optics and Laser Technology, 39, 1054–1058.10.1016/j.optlastec.2006.05.004 ↗
46. Petrak, S., & Rogale, D. (2001). Methods of automatic computerised cutting pattern construction. International Journal of Clothing Science and Technology, 13, 228–239.10.1108/09556220110396542 ↗
47. Petrie, E. (2015). Alternative fabric-joining technologies 13. In R. Nayak, R. Padhye (Eds.), Garment Manufacturing Technology. Cambridge, UK: Elsevier.10.1016/B978-1-78242-232-7.00013-8 ↗
48. Potluri, P., & Atkinson, J. (2003). Automated manufacture of composites: handling, measurement of properties and lay-up simulations. Composites Part A Applied Science and Manufacturing, 34, 493–501.10.1016/S1359-835X(03)00056-3 ↗
49. Powell, J. (1993). CO2 laser cutting. Cambridge: Univ Press.10.1007/978-1-4471-3384-1 ↗
50. Protection, I. C. O. N.-I. R. (1996). Guidelines on limits of exposure to laser radiation of wavelengths between 180 nm and 1,000 [mu] m. Health Physics, 71, 804–819.
51. Ready, J. F., Farson, D. F., & Feeley, T. (2001). LIA handbook of laser materials processing. Orlando: Laser Institute of America.
52. Ribolzi, S., Merckle, J., Gresser, J., & Exbrayat, P. (1993). Real-time fault detection on textiles using opto-electronic processing. Textile Research Journal, 63, 61–71.10.1177/004051759306300201 ↗
53. Schuocker, D. (1989). Laser cutting. Material and Manufacturing Process, 4, 311–330.10.1080/10426918908956297 ↗
54. Simmons, K. P., & Istook, C. L. (2003). Body measurement techniques: comparing 3D body-scanning and anthropometric methods for apparel applications. Journal of Fashion Marketing and Management, 7, 306–332.10.1108/13612020310484852 ↗
55. Sliney, D. H. (1995). Laser safety. Lasers in Surgery and Medicine, 16, 215–225.10.1002/lsm.1900160303 ↗
56. Steen, W., Watkins, K. G., & Mazumder, J. (2010). Laser material processing. Amsterdam: Springer Science & Business Media.10.1007/978-1-84996-062-5 ↗
57. Sutcliffe, H., Cooper, M., & Farnsworth, J. (2000). An initial investigation into the cleaning of new and naturally aged cotton textiles using laser radiation. Journal of Cultural Heritage, 1, S241–S246.10.1016/S1296-2074(00)00178-3 ↗
58. Tarhan, M., & Sarıışık, M., (2009). A comparison among performance characteristics of various denim fading processes. Textile Research Journal, 79, 301–309.10.1177/0040517508090889 ↗
59. Thawari, G., Sundar, J. S., Sundararajan, G., & Joshi, S. (2005). Influence of process parameters during pulsed Nd: yAG laser cutting of nickel-base superalloys. Journal of Materials Processing Technology, 170, 229–239.10.1016/j.jmatprotec.2005.05.021 ↗
60. Tong, J., Zhou, J., Liu, L., Pan, Z., & Yan, H. (2012). Scanning 3d full human bodies using kinects. Visualization and Computer Graphics, IEEE Transactions on, 18, 643–650.10.1109/TVCG.2012.56 ↗
61. Vilumsone-nemes, I. (2012). Industrial Cutting of Textile Materials. Amsterdam: Elsevier.10.1533/9780857095565 ↗
62. Wyrsch, S., Baenninger, P. B., & Schmid, M. K. (2010). Retinal injuries from a handheld laser pointer. New England Journal of Medicine, 363, 1089–1091.10.1056/NEJMc1005818 ↗
63. Yashima, Y., McAuliffe, D. J., Jacques, S. L., & Flotte, T. J. (1991). Laser-induced photoacoustic injury of skin: effect of inertial confinement. Lasers in Surgery and Medicine, 11, 62–68.10.1002/lsm.1900110113 ↗
64. Yuan, G. X., Jiang, S. X., Newton, E., Fan, J. T., & Au, W. M. (2012). Application of laser treatment for fashion design. Journal of the Textile Institute, 103, 48–54.10.1080/00405000.2010.542311 ↗