Three-dimensional printed lattice structures for next generation of wearable technology
Source abstract
Abstract
Lattice structures, best known for their high strength-to-weight ratio, flexibility, and tunable mechanical properties, have garnered increasingly more attention across various industries that require advanced performance and material efficiency for their products. The advent of three-dimensional (3D) printing technologies has further expanded design possibilities and manufacturing accuracy of such structures, thus enabling the fabrication of products with complex geometries that are difficult or not possible to achieve through traditional production methods. In the textile and apparel industries, the integration of 3D-printed lattice structures offers unprecedented opportunities to create lightweight, adaptive, and highly customizable wearable devices. These innovations have paved the way for emerging applications that range from sportswear and protective gear to smart textiles and personalized healthcare solutions. This review examines the key 3D printing technologies and materials commonly employed in lattice fabrication, which highlight their role in producing wearable lattice textiles across different performance scales. The study further categorizes 3D-printed lattice geometries based on how they address specific requirements in textile applications, such as breathability, energy absorption, and wear comfort. Additionally, the review discusses current challenges, including material limitations, structural design complexities, and scalability issues, while proposing future directions for research and development. This review paper serves as a comprehensive resource for researchers, engineers, and designers who wish to leverage 3D-printed lattice structures for the next generation of functional textiles and apparel.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Cellular and Composite Structures · Advanced Materials and Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Abd-Elaziem, W., Khedr, M., Abd-Elaziem, A. E., Allah, M. M. Q., Mousa, A. A., Yehia, H. M., Daoush, W. M., & El-Baky, M. A. A. (2023). Particle-reinforced polymer matrix composites (PMC) fabricated by 3D printing. Journal of Inorganic and Organometallic Polymers and Materials, 33, 3732–3749. https://doi.org/10.1007/s10904-023-02819-110.1007/s10904-023-02819-1 ↗
2. Alomar, Z., & Concli, F. (2020). A review of the selective laser melting lattice structures and their numerical models. Advanced Engineering Materials, 22, Article 2000611. https://doi.org/10.1002/adem.20200061110.1002/adem.202000611 ↗
3. Amorim, D. J. N., Nachtigall, T., & Alonso, M. B. (2019). Exploring mechanical meta-material structures through personalised shoe sole design. In Proceedings of the ACM Symposium on Computational Fabrication (pp.1–8). https://doi.org/10.1145/3328939.332900110.1145/3328939.3329001 ↗
4. Andrew, J. J., Khan, K. A., Umer, R., & Schiffer, A. (2024). Energy absorption and piezoresistive characteristics of 3D printed honeycomb composites with hybrid cell architecture. Virtual and Physical Prototyping, 19, Article e2342430. https://doi.org/10.1080/17452759.2024.234243010.1080/17452759.2024.2342430 ↗
5. Arabnejad, S., Johnston, R. B., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016). High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints. Acta Biomaterialia, 30, 345–356. https://doi.org/10.1016/j.actbio.2015.10.04810.1016/j.actbio.2015.10.048 ↗
6. Badini, S., Regondi, S., Lammi, C., Bollati, C., Donvito, G., & Pugliese, R. (2023). Computational mechanics of form-fitting 3D-printed lattice-based wrist-hand orthosis for motor neuron disease. Biomedicines, 11, Article 1787. https://doi.org/10.3390/biomedicines1107178710.3390/biomedicines11071787 ↗
7. Baranowski, P., Kapusta, A., Płatek, P., & Sarzyński, M. (2024). Influence of 3D-printed cellular shoe soles on plantar pressure during running: Experimental and numerical studies. Biocybernetics and Biomedical Engineering, 44(4), 858–873. https://doi.org/10.1016/j.bbe.2024.11.00410.1016/j.bbe.2024.11.004 ↗
8. Bates, S. R. G., Farrow, I. R., & Trask, R. S. (2016). 3D printed polyurethane honeycombs for repeated tailored energy absorption. Materials & Design, 112, 172–183. https://doi.org/10.1016/j.bbe.2024.11.00410.1016/j.bbe.2024.11.004 ↗
9. Beecroft, M. (2016). 3D printing of weft knitted textile based structures by selective laser sintering of nylon powder. In 2016 Global Conference on Polymer and Composite Materials. Hangzhou. https://doi.org/10.1088/1757-899X/137/1/01201710.1088/1757-899X/137/1/012017 ↗
10. Beloshenko, V., Beygelzimer, Y., Chishko, V., Savchenko, B., Sova, N., Verbylo, D., Voznyak, A., & Vozniak, I. (2021). Mechanical properties of flexible TPU-based 3D printed lattice structures: Role of lattice cut direction and architecture. Polymers, 13(17), Article 2986. https://doi.org/10.3390/polym1317298610.3390/polym13172986 ↗
11. Benié, K., Cherouat, A., Barrière, T., & Placet, V. (2025). Multiphysics optimization of additive manufacturing of hemp fiber reinforced polylactic acid composite honeycomb structures. Additive Manufacturing, 100, Article 104697. https://doi.org/10.1016/j.addma.2025.10469710.1016/j.addma.2025.104697 ↗
12. Bouteldja, A., Louar, M. A., Hemmouche, L., Gilson, L., Miranda-Vicario, A., & Rabet, L. (2023). Experimental investigation of the quasi-static and dynamic compressive behavior of polymer-based 3D-printed lattice structures. International Journal of Impact Engineering, 180, Article 104640. https://doi.org/10.1016/j.ijimpeng.2023.10464010.1016/j.ijimpeng.2023.104640 ↗
13. Brennan-Craddock, J., Brackett, D., Wildman, R., & Hague, R. (2012). The design of impact absorbing structures for additive manufacture. Journal of Physics: Conference Series, 382, Article 012042. https://doi.org/10.1088/1742-6596/382/1/01204210.1088/1742-6596/382/1/012042 ↗
14. Buchanan, C., & Gardner, L. (2019). Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges. Engineering Structures, 180, 332–348. https://doi.org/10.1016/j.engstruct.2018.11.04510.1016/j.engstruct.2018.11.045 ↗
15. Bus, S. A., Ulbrecht, J. S., & Cavanagh, P. R. (2004). Pressure relief and load redistribution by custom-made insoles in diabetic patients with neuropathy and foot deformity. Clinical Biomechanics, 19(6), 629–638. https://doi.org/10.1016/j.clinbiomech.2004.02.01010.1016/j.clinbiomech.2004.02.010 ↗
16. Cao, W. T., Ma, C., Mao, D. S., Zhang, J., Ma, M. G., & Chen, F. (2019). MXene‐reinforced ccellulose nanofibril inks for 3D‐printed smart fibres and textiles. Advanced Functional Materials, 29, Article 1905898. https://doi.org/10.1002/adfm.20190589810.1002/adfm.201905898 ↗
17. Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016). Poly(lactic acid)—Mass production, processing, industrial applications, and end of life. Advanced Drug Delivery Review, 107, 333–366. https://doi.org/10.1016/j.addr.2016.03.01010.1016/j.addr.2016.03.010 ↗
18. Cazón-Martín, A., Iturrizaga-Campelo, M., Matey-Muñoz, L., Rodríguez-Ferradas, M. I., Morer-Camo, P., & Ausejo-Muñoz, S. (2018). Design and manufacturing of shin pads with multi-material additive manufactured features for football players: A comparison with commercial shin pads. Journal of Sports Engineering and Technology, 233(1), 160–169. https://doi.org/10.1177/175433711881126610.1177/1754337118811266 ↗
19. Channa, S. & Sun D. (2024). Numerical study of 3D printed novel flexible 3D structures for protective clothing. Sun, Danmei and Channa, Saadullah, Numerical Study of 3d Printed Novel Flexible 3d Structures for Protective Clothing. Available at SSRN. https://doi.org/10.2139/ssrn.4814162.10.2139/ssrn.4814162 ↗
20. Channa, S., Sun, D., & Stylios, G. K. (2023). Impact resistance of 3D cellular structures for protective clothing. Advanced Engineering Materials, 25, Article 2201336. https://doi.org/10.1002/adem.20220133610.1002/adem.202201336 ↗
21. Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2022). Additive manufacturing by digital light processing: A review. Progress in Additive Manufacturing, 8, 331–351. https://doi.org/10.1007/s40964-022-00336-010.1007/s40964-022-00336-0 ↗
22. Chen, X., Li, Y., & Zhao, G. (2023a). Preparation and characterization of 3D printed ZrO2 ceramic parts fabricated by powder extrusion printing. Ceramics International, 49, 2721–2729. https://doi.org/10.1016/j.ceramint.2022.09.25310.1016/j.ceramint.2022.09.253 ↗
23. Chen, Z., Li, J., Wu, B., Chen, X., Ren, X., & Xie, Y. M. (2023b). A novel bio-inspired helmet with auxetic lattice liners for mitigating traumatic brain injury. Smart Materials and Structures, 32, Article 105020. https://doi.org/10.1088/1361-665X/acf62e10.1088/1361-665X/acf62e ↗
24. Cheng, H., Liu, B., Liu, M., & Cao, W. (2022). Design of three-dimensional voronoi strut midsoles driven by plantar pressure distribution. Journal of Computational Design and Engineering, 9, 1410–1429. https://doi.org/10.1093/jcde/qwac06010.1093/jcde/qwac060 ↗
25. Cheng, P., Peng, Y., Li, S., Rao, Y., Duigou, A. L., Wang, K., & Ahzi, S. (2023). 3D printed continuous fiber reinforced composite lightweight structures: A review and outlook. Composites Part b: Engineering, 250, Article 110450. https://doi.org/10.1016/j.compositesb.2022.11045010.1016/j.compositesb.2022.110450 ↗
26. Cho, Y. H., Lee, I. H., & Cho, D. W. (2005). Laser scanning path generation considering photopolymer solidification in micro-stereolithography. Microsystem Technologies, 11, 158–167. https://doi.org/10.1007/s00542-004-0468-210.1007/s00542-004-0468-2 ↗
27. Chu, W., Zhao, J., Ma, X., Wang, F., Zhang, X., Zhang, Y., Han, Z., Bi, L., Wang, H., Zhai, B., Zhou, Q., & Li, L. (2025). Lightweight high-heat-resistance zirconia ceramic lattice screws prepared by photocuring 3D printing technology. Ceramics International, 51, 9970–9977. https://doi.org/10.1016/j.ceramint.2024.12.42910.1016/j.ceramint.2024.12.429 ↗
28. Chua, C. K., Leong, K. F., Tan, K. H., Wiria, F. E., & Cheah, C. M. (2004). Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects. Journal of Materials Science, I5, 1113–1121. https://doi.org/10.1023/B:JMSM.0000046393.81449.a510.1023/B:JMSM.0000046393.81449.a5 ↗
29. Clough, E. C., Eckel, J. E. Z. C., Ro, C. J., & Schaedler, T. A. (2016). Mechanical performance of hollow tetrahedral truss cores. International Journal of Solids and Structures, 91, 115–126. https://doi.org/10.1016/j.ijsolstr.2016.04.00610.1016/j.ijsolstr.2016.04.006 ↗
30. Corvi, A., Collini, L., Sciancalepore, C., & Kumar, A. (2023). Analysis and modelling of damage mechanism in FDM 3D-printed lattice structure under compression loading. Journal of Mechanical Science and Technology, 37(3), 1089–1095. https://doi.org/10.1007/s12206-022-2104-410.1007/s12206-022-2104-4 ↗
31. DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science, 92, 112–224. https://doi.org/10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
32. Decker, T., & Kedziora, S. (2024). Optimizing the thickness of functionally graded lattice structures for high-performance energy absorption: A case study based on a bicycle helmet. Applied Sciences, 14, Article 2788. https://doi.org/10.3390/app1407278810.3390/app14072788 ↗
33. Deshpande, V. S., Fleck, N. A., & Ashby., M. F. (2001). Effective properties of the octet-truss lattice material. Journal of the Mechanics and Physics of Solids, 49(8), 1747–1769. https://doi.org/10.1016/S0022-5096(01)00010-210.1016/S0022-5096(01)00010-2 ↗
34. Di Giacomo, G. A. P. D., Cury, P. R., Silva, A. M., Silva, J. V., & Ajzen, S. A. (2016). A selective laser sintering prototype guide used to fabricate immediate interim fixed complete arch prostheses in flapless dental implant surgery: Technique description and clinical results. Journal of Prosthethetic Dentistry, 116(6), 874–879. https://doi.org/10.1016/j.prosdent.2016.04.01810.1016/j.prosdent.2016.04.018 ↗
35. Domínguez-Rodríguez, G., Ku-Herrera, J. J., & Hernández-Pérez, A. (2018). An assessment of the effect of printing orientation, density, and filler pattern on the compressive performance of 3D printed ABS structures by fuse deposition. The International Journal of Advanced Manufacturing Technology, 95, 1685–1695. https://doi.org/10.1007/s00170-017-1314-x10.1007/s00170-017-1314-x ↗
36. Dorsey, K. L., Roberts, S. F., Forman, J., & Ishii, H. (2022). Analysis of DefeXtiles: A 3D printed textile towards garments and accessories. Journal of Micromechanics and Microengineering, 32, Article 034005. https://doi.org/10.1088/1361-6439/ac4fad10.1088/1361-6439/ac4fad ↗
37. Duvoisin, C., Horst, D., & Sousa, M. (2018). Additive manufacturing at Industry 4.0: A review. International Journal of Engineering and Technical Research, 8(8), 2454–4698.
38. Dwivedi, S. K., Singh, R., & Singh, M. (2021). Multi-material 3D printed PLA/PA6-TiO2 composite matrix: Rheological, thermal, tensile, morphological and 4D capabilities. Advances in Materials and Processing Technology, 8(3), 1–19. https://doi.org/10.1080/2374068X.2021.191252710.1080/2374068X.2021.1912527 ↗
39. Egan, P. F., Khatri, N. R., Parab, M. A., & Arefin, A. M. E. (2022). Mechanics of 3D-printed polymer lattices with varied design and processing strategies. Polymers, 14(24), Article 5515. https://doi.org/10.3390/polym1424551510.3390/polym14245515 ↗
40. Elst, L., Lima, C. F., Kurtoglu, M. G., Koraganji, V. N., Zheng, M., & Gumennik, A. (2021). 3D printing in fiber-device technology. Advanced Fiber Materials, 3, 59–75. https://doi.org/10.1007/s42765-020-00056-610.1007/s42765-020-00056-6 ↗
41. Equbal, A., Equbal, M. A., Khan, Z. A., & Badruddin, I. A. (2025). A review on the rapid liquid printing (RLP): Future 3D printing technology. Progress in Additive Manufacturing, 10, 3157–3173. https://doi.org/10.1007/s40964-024-00815-610.1007/s40964-024-00815-6 ↗
42. Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001). The topological design of multifunctional cellular metals. Progress in Materials Science, 46(3–4), 309–327. https://doi.org/10.1016/S0079-6425(00)00016-510.1016/S0079-6425(00)00016-5 ↗
43. Fajardo, J. I., Farez, M. V., & Paltan, C. A. (2022). Experimental analysis of the relationship between textile structure, tensile strength and comfort in 3D printed structured fabrics. Polymers, 15(1), Article 152. https://doi.org/10.3390/polym1501015210.3390/polym15010152 ↗
44. Farzinazar, S., Wang, Y., Owens, C. A. H., Yang, C., Lee, H., & Lee, J. (2022). Thermal transport in 3D printed shape memory polymer metamaterials. APL Materials, 10, Article 081105. https://doi.org/10.1063/5.009403610.1063/5.0094036 ↗
45. Fateri, M. & Gebhardt, Andreas. (2014). Jewelry fabrication via selective laser melting of glass. In the 2014 12th Biennial Conference on Engineering Systems Design and Analysis, Denmark. https://doi.org/10.1115/ESDA2014-2038010.1115/ESDA2014-20380 ↗
46. Fernandez-Vicente, M., Escario, A., & Conejero, A. (2017). Low cost digital fabrication approach for thumb orthoses. Rapid Prototyping Journal, 23(6), 1020–1031. https://doi.org/10.1108/RPJ-12-2015-018710.1108/RPJ-12-2015-0187 ↗
47. Fina, F., Goyanes, A., Madla, C. M., Awad, A., Trenfield, S. J., Kuek, J. M., Patel, P., Gaisford, S., & Basit, A. W. (2018). 3D printing of drug-loaded gyroid lattices using selective laser sintering. International Journal of Pharmaceutics, 547(1–2), 44–52. https://doi.org/10.1016/j.ijpharm.2018.05.04410.1016/j.ijpharm.2018.05.044 ↗
48. Fitzpatrick, A. P. Mohanned, M. L., Collins, P., & Gibson, I. (2017). Design of a patient specific, 3D printed arm cast. In the International Conference on Design and Technology (pp. 135–142). https://doi.org/10.18502/keg.v2i2.60710.18502/keg.v2i2.607 ↗
49. Gao, T., Yang, Z., Chen, C., Li, Y., Fu, K., Dai, J., Hitz, E. M., Xie, H., Liu, B., Song, J., Yang, B., & Hu, L. (2017). Three-dimensional printed thermal regulation textiles. ACS Nano, 11(11), 11513–11520. https://doi.org/10.1021/acsnano.7b0629510.1021/acsnano.7b06295 ↗
50. George, M., Aroom, K. R., Hawes, H. G., Gill, B. S., & Love, J. (2017). 3D printed surgical instruments: The design and fabrication process. World Journal of Surgery, 41(1), 314–319. https://doi.org/10.1007/s00268-016-3814-510.1007/s00268-016-3814-5 ↗
51. Gibbons, G. J., & Hansell, R. G. (2005). Direct tool steel injection mould inserts through the Arcam EBM free‐form fabrication process. Assembly Automation, 25(4), 300–305. https://doi.org/10.1108/0144515051062643310.1108/01445150510626433 ↗
52. Gibson, I., Rosen, D., & Stucker, B. (2015). Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing (2nd ed.). Springer.10.1007/978-1-4939-2113-3 ↗
53. Gibson, L. J., & Ashby, M. F. (1997). Cellular solids: Structure and properties. Cambridge University Press.10.1017/CBO9781139878326 ↗
54. Gu, D., Chen, H., Dai, D., Ma, C., Zhang, H., Lin, K., Xi, L., Zhao, T., Hong, C., Gasser, A., & Poprawe, R. (2020). Carbon nanotubes enabled laser 3D printing of high-performance titanium with highly concentrated reinforcement. iScience, 23(9), Article 101498. https://doi.org/10.1016/j.isci.2020.10149810.1016/j.isci.2020.101498 ↗
55. Güdür, C., Türkoglu, T., & Eren, İ. (2023). Effect of lattice design and process parameters on the properties of PLA, ABS and PETG polymers produced by fused deposition modelling. Journal of Materials and Mechatronics: A, 4(2), 561–570. https://doi.org/10.55546/jmm.135721710.55546/jmm.1357217 ↗
56. Guo, K., Liu, C., Chen, S., Dong, H., & Wang, S. (2020). High pressure EIGA preparation and 3D printing capability of Ti-6Al-4V powder. Transactions of Nonferrous Metals Society of China, 30(1), 147–159. https://doi.org/10.1016/S1003-6326(19)65187-310.1016/S1003-6326(19)65187-3 ↗
57. Ha, C. S., Yao, D., Xu, Z., Liu, C., Liu, H., Elkins, D., Kile, M., Deshpande, V., Kong, Z., Bauchy, M., & Zheng, X. R. (2023). Rapid inverse design of metamaterials based on prescribed mechanical behavior through machine learning. Nature Communications, 14, Article 5765. https://doi.org/10.1038/s41467-023-40854-110.1038/s41467-023-40854-1 ↗
58. Halbrecht, A., Kinsbursky, M., Poranne, R., & Sterman, Y. (2023). 3D printed spacer fabrics. Additive Manufacturing, 65, Article 103436. https://doi.org/10.1016/j.addma.2023.10343610.1016/j.addma.2023.103436 ↗
59. Han, Y., & Lu, W. F. (2018). A novel design method for nonuniform lattice structures based on topology optimization. Journal of Mechanical Design, 140(9), Article 091403. https://doi.org/10.1115/1.404054610.1115/1.4040546 ↗
60. Hazarika, A., Deka, B. K., Park, H., Hwang, Y. J., Jaiswal, A. P., Park, Y. B., & Park, H. W. (2023). Hierarchically designed 3-D printed porous nylon fabric-based personal thermoregulatory for radiative and directional wick-evaporative cooling. Chemical Engineering Journal, 471, Article 144536. https://doi.org/10.1016/j.cej.2023.14453610.1016/j.cej.2023.144536 ↗
61. He, M., Yang, L., Zhao, C., Zhang, R., Han, G., & Hao, L. (2024). Effects of design and manufacturing deviations on compressive properties of glass sponge lattice structures manufactured by selective laser melting. Materials & Design, 242, Article 113009. https://doi.org/10.1016/j.matdes.2024.11300910.1016/j.matdes.2024.113009 ↗
62. Hettesheimer, T., Hirzel, S., & Roß, H. B. (2018). Energy savings through additive manufacturing: An analysis of selective laser sintering for automotive and aircraft components. Energy Efficiency, 11, 1227–1245. https://doi.org/10.1007/s12053-018-9620-110.1007/s12053-018-9620-1 ↗
63. Hitzler, L., Alifui-Segbaya, F., Williams, P., Heine, B., Heitzmann, M., Hall, W., Merkel, M., & Öchsner, A. (2018). Additive manufacturing of cobalt‐based dental alloys: Analysis of microstructure and physicomechanical properties. Advances in Materials Science and Engineering, 2018, Article 8213023. https://doi.org/10.1155/2018/821302310.1155/2018/8213023 ↗
64. Holmes, D. W., Singh, D., Lamont, R., Daley, R., Forrestal, D. P., Slattery, P., Pickering, E., Paxton, N. C., Powell, S. K., & Woodruff, M. A. (2022). Mechanical behaviour of flexible 3D printed gyroid structures as a tuneable replacement for soft padding foam. Additive Manufacturing, 50, Article 102555. https://doi.org/10.1016/j.addma.2021.10255510.1016/j.addma.2021.102555 ↗
65. Hong, K. H., & Lee, H. (2020). Development of hip protectors for snowboarding utilizing 3D modeling and 3D printing. Fashion and Textiles, 7, Article 39. https://doi.org/10.1186/s40691-020-00236-310.1186/s40691-020-00236-3 ↗
66. Hu, C. W., Nguyen, C. T., Hölbling, D., Pang, T. Y., Baca, A., & Dabnichki, P. (2022). A novel 3D printed personalised insole for improvement of flat foot arch compression and recoil – preliminary study. Journal of Materials: Design and Applications, 237(2), 1–14. https://doi.org/10.1177/1464420722111236210.1177/14644207221112362 ↗
67. Huang, C., Qian, X., & Yang, R. (2018). Thermal conductivity of polymers and polymer nanocomposites. Materials Science & Engineering R, 132, 1–22. https://doi.org/10.1016/j.mser.2018.06.00210.1016/j.mser.2018.06.002 ↗
68. Huang, S. H., Liu, P., Mokasdar, A., & Liang, H. (2013). Additive manufacturing and its societal impact: A literature review. The International Journal of Advanced Manufacturing Technology, 67(5–8), 1191–1203. https://doi.org/10.1007/s00170-012-4558-510.1007/s00170-012-4558-5 ↗
69. Iftekar, S. F., Aabid, A., Amir, A., & Baig, M. (2023). Advancements and limitations in 3D printing materials and technologies: A critical review. Polymers, 15(11), Article 2519. https://doi.org/10.3390/polym1511251910.3390/polym15112519 ↗
70. Ilhan, E., Cesur, S., Guler, E., Topal, F., Albayrak, D., Guncu, M. M., Cam, M. E., Taskin, T., Sasmazel, H. T., Aksu, B., Oktar, F. N., & Gunduz, O. (2020). Development of *Satureja cuneifolia*-loaded sodium alginate/polyethylene glycol scaffolds produced by 3D-printing technology as a diabetic wound dressing material. International Journal of Biological Macromolecules, 161, 1040–1054. https://doi.org/10.1016/j.ijbiomac.2020.06.08610.1016/j.ijbiomac.2020.06.086 ↗
71. Jafferson, J. M., & Pattanashetti, S. (2021). Use of 3D printing in production of personal protective equipment (PPE): A review. Materials Today: Proceedings, 46, 1247–1260. https://doi.org/10.1016/j.matpr.2021.02.07210.1016/j.matpr.2021.02.072 ↗
72. Jamshidi, M., Park, C. B., & Azhari, F. (2024). The design and fabrication of a wearable lattice-patterned 3D sensing skin. Sensors and Actuators a: Physical, 369, Article 115143. https://doi.org/10.1016/j.sna.2024.11514310.1016/j.sna.2024.115143 ↗
73. Jandyal, A., Chaturvedi, I., Wazir, I., Raina, A., & Haq, M. I. U. (2022). 3D printing: A review of processes, materials and applications in Industry 4.0. Sustainable Operations and Computers, 3, 33–42. https://doi.org/10.1016/j.susoc.2021.09.00410.1016/j.susoc.2021.09.004 ↗
74. Janisse, D., & Janisse, E. (2015). Pedorthic management of the diabetic foot. Prosthetics and Orthotics International, 39(1), 40–47. https://doi.org/10.1177/030936461453523310.1177/0309364614535233 ↗
75. Jung, I., Shin, E. J., & Lee, S. (2023). Study on CNT/TPU cube under the 3D printing conditions of infill patterns and density. Scientific Reports, 13, Article 17728. https://doi.org/10.1038/s41598-023-44951-510.1038/s41598-023-44951-5 ↗
76. Kabir, S. M. F., Mathur, K., & Seyam, A. F. M. (2020). A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties. Composite Structures, 232, Article 111476. https://doi.org/10.1016/j.compstruct.2019.11147610.1016/j.compstruct.2019.111476 ↗
77. Kalossaka, L. M., Mohammed, A. A., Sena, G., Barter, L., & Myant, C. (2021). 3D printing nanocomposite hydrogels with lattice vascular networks using stereolithography. Journal of Materials Research, 36, 4249–4261. https://doi.org/10.1557/s43578-021-00411-210.1557/s43578-021-00411-2 ↗
78. Kang, L. P., & Gong, T. S. (2023). Design of 3D printed pressure-reducing insoles based on changes in parameters of lattice structure. Advances in Mechanical Engineering, 15, 1–11. https://doi.org/10.1177/1687813223121660910.1177/16878132231216609 ↗
79. Karaivanov, B., Angeleska, E., & Avramov, N. (2023). Load carrying capacities of gears with a lattice structure body. MATEC Web of Conferences, 387, Article 02001. https://doi.org/10.1051/matecconf/20233870200110.1051/matecconf/202338702001 ↗
80. Kaur, M., & Kim, W. S. (2019). Toward a smart compliant robotic gripper equipped with 3D‐designed cellular fingers. Advanced Intelligent Systems, 1(3), Article 1900019. https://doi.org/10.1002/aisy.20190001910.1002/aisy.201900019 ↗
81. Khan, S. A., Rahman, M. A., Khraisheh, M., & Hassan, I. G. (2024). Advances in 3D printed periodic lattice structures for energy research: Energy storage, transport and conversion applications. Materials & Design, 239, Article 112773. https://doi.org/10.1016/j.matdes.2024.11277310.1016/j.matdes.2024.112773 ↗
82. Kim, H. (2018). Market analysis and the future of sustainable design using 3D printing technology. Archives of Design Research, 31(1), 23–35. https://doi.org/10.15187/adr.2018.02.31.1.2310.15187/adr.2018.02.31.1.23 ↗
83. Kim, H., & Lee, S. (2020). Characterization of electrical heating of graphene/PLA honeycomb structure composite manufactured by CFDM 3D printer. Fashion and Textiles, 7, Article 8. https://doi.org/10.1186/s40691-020-0204-210.1186/s40691-020-0204-2 ↗
84. Kladovasilakis, N., Tsongas, K., Pechlivani, E. M., & Tzetzis, D. (2025). Development and dynamic numerical evaluation of a lightweight sports helmet using topology optimization and advanced architected materials. Designs, 9(2), Article 28. https://doi.org/10.3390/designs902002810.3390/designs9020028 ↗
85. Kothandaraman, L., & Balasubramanian, N. K. (2024). Optimization of FDM printing parameters for square lattice structures: improving mechanical characteristics. Materials Today Proceedings. https://doi.org/10.1016/j.matpr.2024.04.03310.1016/j.matpr.2024.04.033 ↗
86. Kristiawan, R. B., Imaduddin, F., Ariawan, D., Ubaidillah, & Arifin, Z. (2021). A review on the fused deposition modeling (FDM) 3D printing: filament processing, materials, and printing parameters. Open Engineering, 11(1), 639–649. https://doi.org/10.1515/eng-2021-006310.1515/eng-2021-0063 ↗
87. Kruth, J. P., Leu, M. C., & Nakagawa, T. (1998). Progress in additive manufacturing and rapid prototyping. CIRP Annals, 47(2), 525–540. https://doi.org/10.1016/S0007-8506(07)63240-510.1016/S0007-8506(07)63240-5 ↗
88. Kumar, S., Rajath, S., Shivakumar, N. D., Ramesh, M. R., & Doddamani, M. (2024). 3D printing of functionally graded nanocomposites: An investigation of microstructural, rheological, and mechanical behavior. Polymer Engineering & Science, 64(10), 4677–4694. https://doi.org/10.1002/pen.2687310.1002/pen.26873 ↗
89. Kumar, V., Rupinder, S., & Ahuja, I. S. (2022). On 3D printing of electro-active PVDF-Graphene and Mn-doped ZnO nanoparticle-based composite as a self-healing repair solution for heritage structures. Proceedings of the Institution of Mechanical Engineers, Part b: Journal of Engineering Manufacture, 236(8), 1141–1154. https://doi.org/10.1177/0954405421106091210.1177/09544054211060912 ↗
90. Kwon, J., & Kim, N. (2021). Performance of wearables and the effect of user behavior in additive manufacturing process. Fashion and Textiles, 8, Article 27. https://doi.org/10.1186/s40691-021-00251-y10.1186/s40691-021-00251-y ↗
91. Lee, Y. A. & Li, Y. (2021). Bouncing with 3D Printed Soft Cells. In the International Textile and Apparel Association Annual Conference Proceedings, 78(1). https://doi.org/10.31274/itaa.1329110.31274/itaa.13291 ↗
92. Lee, J., & Chun, J. (2025). Development of personalized cast shoes using 3D printing technology. Fashion and Textiles, 12, Article 7. https://doi.org/10.1186/s40691-024-00409-410.1186/s40691-024-00409-4 ↗
93. Lee, S. K., & Koo, S. (2022). Development of three-dimensional printed cultural fashion products using symbols of longevity. Textile Research Journal, 92(21–22), 4484–4500. https://doi.org/10.1177/0040517522110523710.1177/00405175221105237 ↗
94. Leon-Becerra, J., Gonzalez-Estrada, O. A., & Quiroga, J. (2021). Effect of relative density in in-plane mechanical properties of common 3D-printed polylactic acid lattice structures. ACS Omega, 6(44), 29830–29838. https://doi.org/10.1021/acsomega.1c0429510.1021/acsomega.1c04295 ↗
95. Li, H., Wang, M., Lou, D., Xia, W., & Fang, X. (2020). Microstructural features of biomedical cobalt–chromium–molybdenum (CoCrMo) alloy from powder bed fusion to aging heat treatment. Journal of Materials Science & Technology, 45, 146–156. https://doi.org/10.1016/j.jmst.2019.11.03110.1016/j.jmst.2019.11.031 ↗
96. , J., Jung, I., & Lee, S. (2024). Analysis of plantar pressure of midsole prepared by 3D printed biomimetic structures with different densities. Fashion and Textiles, 11, Article 35. https://doi.org/10.1186/s40691-024-00402-x10.1186/s40691-024-00402-x ↗
97. Li, Q., Jia, X., Ye, X., Tan, H., Wang, F., & Hu, L. (2025). Axial compression property of a novel dendritic lattice structure. Materials Today Communications, 46, Article 112668. https://doi.org/10.1016/j.mtcomm.2025.11266810.1016/j.mtcomm.2025.112668 ↗
98. Liang, C. Y., Jiang, X. J., Ji, R. L., Li, B. E., Zou, X. R., Wang, H. S., Hao, J. Z., & Yang, T. (2020). Preparation and surface modification of 3D printed Ti-6Al-4V porous implant. Rare Metals, 40, 1164–1172. https://doi.org/10.1007/s12598-020-01413-510.1007/s12598-020-01413-5 ↗
99. Lin, C., Huang, Z., Wang, Q., Zou, Z., Wang, W., Liu, L., Liu, Y., & Leng, J. (2023). Mass-producible near-body temperature-triggered 4D printed shape memory biocomposites and their application in biomimetic intestinal stents. Composites Part b: Engineering, 256, Article 110623. https://doi.org/10.1016/j.compositesb.2023.11062310.1016/j.compositesb.2023.110623 ↗
100. Lin, W. S., Harris, B. T., Pellerito, J., & Morton, D. (2018). Fabrication of an interim complete removable dental prosthesis with an in-office digital light processing three-dimensional printer: A proof-of-concept technique. Journal of Prosthetic Dentistry, 120(3), 331–334. https://doi.org/10.1016/j.prosdent.2017.12.02710.1016/j.prosdent.2017.12.027 ↗