Developing parametric design fashion products using 3D printing technology
Source abstract
Abstract
Abstract This study created wearable fashion products with parametric design characteristics, using 3D printing technology. The goal of the study was to understand what parametric design features can be simulated with 3D modeling and printing technology, as well as to demonstrate what techniques can be used to produce fashion products using 3D printing technology. This study created two different parametric motifs using an FDM-type 3D printer with TPU and ABS as the printing materials. With those motifs, we produced three garments and two accessories. The limitations found during the process were modeling the exact measurement of the motifs that will merge with the apparel design seamlessly while maintaining the parametric features, as well as attaching the printed motifs to fabric without ruining the integrity of the textile. A significant implication of this study is that it recreates parametric designs on the human body and utilizes 3D printing technology for fashion products. This paper cast a light on a discussion about the technique can be applied on fashion design with full-sized body and encouraged designers to explore further with technological advancements in the future.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Shape Modeling and Analysis · Fashion and Cultural Textiles
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Attaran, M. (2017). The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing. Business Horizons, 60(5), 677–688.10.1016/j.bushor.2017.05.011 ↗
2. Barros, M., Duarte, J. P., & Chaparro, B. M. (2011). A design system for the mass customization of Thonet chairs. In: H. Bartolo et al. (Eds.), 2011. In Proceedings 1st sustainable intelligent manufacturing conference (pp. 737–745). Leiria, PT: Polythechnic Institute of Leiria.
3. Belogolobsky, V. (2016). Jeanne Gang: “Without an Intellectual Construct Life is Boring”, Archdaily, https://www.archdaily.com/
4. Berman, B. (2012). 3-D printing: The new industrial revolution. Business horizons, 55(2), 155–162.10.1016/j.bushor.2011.11.003 ↗
5. Boz, S., Necef, Ö. K., Kılıç, A. Ş, & Öndoğan, Z. (2019). The usage of 3D technologies in assessment of body fitting of clothing. Turkish Journal of Fashion Design and Management, 1(1), 13–20.
6. Casale, A., Valenti, G. M., Calvano, M., & Romor, J. (2013). Surfaces: concept, design, parametric modeling and prototyping. Nexus Network Journal, 15(2), 271–283.10.1007/s00004-013-0146-8 ↗
7. Choi, K. (2017). A Study on the Characteristics of 3D Printing Jewelry Design Utilizing with Fractal Geometry. Journal of Fashion Business, 21(5), 136–150.
8. Chun, J. H. (2017). Development of wearable fashion protypes using entry-level 3D printers. Journal of the Korean Society of Clothing and Textiles, 41(3), 468–486.10.5850/JKSCT.2017.41.3.468 ↗
9. de León, A. S., Domínguez-Calvo, A., & Molina, S. I. (2019). Materials with enhanced adhesive properties based on acrylonitrile-butadiene-styrene (ABS)/thermoplastic polyurethane (TPU) blends for fused filament fabrication (FFF). Materials & Design, 182, 1–11.10.1016/j.matdes.2019.108044 ↗
10. Dino, I. G. (2012). Creative design exploration by parametric generative systems in architecture. METU Journal of Faculty of Architecture, 29(1), 207–224.
11. Foreman, K. (2018). Iris Van Herpen Haute Couture Spring 2018; The collection was technically impressive but made had a more human side. WWD. Retrieved from https://wwd.com/runway/spring-couture-2018/paris/iris-van-herpen/review/.
12. Frazer, J. (2016). Parametric computation: History and future. Architectural Design, 86(2), 18–23.10.1002/ad.2019 ↗
13. Hernandez, C. R. B. (2006). Thinking parametric design: introducing parametric Gaudi. Design Studies, 27(3), 309–324.10.1016/j.destud.2005.11.006 ↗
14. Holzer, D., Hough, R., & Burry, M. (2007). Parametric design and structural optimisation for early design exploration. International Journal of Architectural Computing, 5(4), 625–643.10.1260/147807707783600780 ↗
15. Hudson, R. (2008). Knowledge acquisition in parametric model development. International Journal of Architectural Computing, 6(4), 435–451.10.1260/147807708787523277 ↗
16. Kim, S., Seong, H., Her, Y., & Chun, J. (2019). A study of the development and improvement of fashion products using a FDM type 3D printer. Fashion and Textiles, 6(1), 1–24.10.1186/s40691-018-0162-0 ↗
17. Kim, Y. K., & Yoo, Y. S. (2009). A study of the formative characteristics of organic modernism design in fashion. Journal of the Korean Society of Costume, 59(10), 98–110.
18. Kwon, Y. M., Lee, Y. A., & Kim, S. J. (2017). Case study on 3D printing education in fashion design coursework. Fashion and Textiles, 4(1), 26.10.1186/s40691-017-0111-3 ↗
19. Lee, Y. A., & Koo, S. H. (2018). Introduction to special collection on 3D printing and wearable technology in fashion. Fashion and Textiles, 5(34), 1–4.
20. Liu, K., Zeng, X., Wang, J., Tao, X., Xu, J., Jiang, X., et al. (2018). Parametric design of garment flat based on body dimension. International Journal of Industrial Ergonomics, 65, 46–59.10.1016/j.ergon.2018.01.013 ↗
21. Lyu, J., Hahn, K., & Sadachar, A. (2018). Understanding millennial consumer’s adoption of 3D printed fashion products by exploring personal values and innovativeness. Fashion and Textiles, 5(1), 11.10.1186/s40691-017-0119-8 ↗
22. Matcha, H. (Ed.). (2007). Parametric possibilities: Designing with parametric modelling. In: Proceedings of the 25th eCAADe conference on predicting the future, Frankfurt, DE: Faculty of Architecture and Civil engineering.10.52842/conf.ecaade.2007.849 ↗
23. Mazhar, H., Osswald, T., & Negrut, D. (2016). On the use of computational multi-body dynamics analysis in SLS-based 3D printing. Additive Manufacturing, 12, 291–295.10.1016/j.addma.2016.05.012 ↗
24. Mpofu, N. S., Mwasiagi, J. I., Nkiwane, L. C., & Njuguna, D. (2019). Use of regression to study the effect of fabric parameters on the adhesion of 3D printed PLA polymer onto woven fabrics. Fashion and Textiles, 6(1), 24.10.1186/s40691-019-0180-6 ↗
25. Myung, S., & Han, S. (2001). Knowledge-based parametric design of mechanical products based on configuration design method. Expert Systems with applications, 21(2), 99–107.10.1016/S0957-4174(01)00030-6 ↗
26. Nahm, Y. E., & Ishikawa, H. (2006). A new 3D-CAD system for set-based parametric design. The International Journal of Advanced Manufacturing Technology, 29(1–2), 137–150.10.1007/s00170-004-2213-5 ↗
27. Naddeo, F., Naddeo, A., & Cappetti, N. (2017). Novel “load adaptive algorithm based” procedure for 3D printing of lattice-based components showing parametric curved micro-beams. Composites Part B: Engineering, 115, 51–59. https://doi.org/10.1016/j.compositesb.2016.10.037.10.1016/j.compositesb.2016.10.037 ↗
28. Nyman, H. J., & Sarlin, P. (2014, January). From bits to atoms: 3D printing in the context of supply chain strategies. IEEE 2014. Proceedings of the 47th IEEE international conference on system sciences (pp. 4190–4199). Hawaii, HI: IEEE System Science.10.1109/HICSS.2014.518 ↗
29. Oya, T., Mikami, T., Kaneko, T., & Higashi, M. (2006). Parametric design method for shapes with aesthetic free-form surfaces. In: Kim MS., Shimada K. (Eds), GMP 2006 Proceedings of the 4th International conference on geometric modeling and processing (pp. 371–384). Pittsburgh, PA: GMP computer science.10.1007/11802914_26 ↗
30. Panchuk, N. (2006). An exploration into biomimicry and its application in digital & parametric [architectural] design [Unpublished master’s thesis]. Canada: University of Waterloo.
31. Park, J. D. (2017). A study on the possible correlation between atypical form museums and exhibition display design. Journal of Digital Design, 17(2), 51–60.
32. Park, J. J., & Dave, B. (2014). Bio-inspired parametric design for adaptive stadium façades. Australasian Journal of Construction Economics and Building-Conference Series, 2(2), 27–35.10.5130/ajceb-cs.v2i2.3886 ↗
33. Park, S. Y., & Yoo, Y. S. (2016). A case study on collaborations in 3D printing fashion. Journal of the Korean Society of Costume, 66(7), 124–138.10.7233/jksc.2016.66.7.124 ↗
34. Pasricha, A., & Greeninger, R. (2018). Exploration of 3D printing to create zero-waste sustainable fashion notions and jewelry. Fashion and Textiles, 5(1), 1–18.10.1186/s40691-018-0152-2 ↗
35. Pottmann, H. (2010). Architectural geometry as design knowledge. Architectural Design, 80(4), 72–77.10.1002/ad.1109 ↗
36. Saunders, S. (2019, May 2). Designer Julia Daviy introduces her digitally customizable 3D printed skirt [Web page]. Retrieved from https://3dprint.com/242849/julia-daviy-digitally-customizable-3d-printed-skirt/
37. Sayem, A. S. M., Kennon, R., & Clarke, N. (2010). 3D CAD systems for the clothing industry. International Journal of Fashion Design, Technology and Education, 3(2), 45–53.10.1080/17543261003689888 ↗
38. Schnabel M.A. (2007) Parametric Designing in Architecture. In: Dong A., Moere A.V., Gero J.S. (Eds), CAADFutures 2007. Proceeding of the 12th International in Computer-Aided Architectural Design Futures (pp. 237–250). Dordrecht, NL: CAAD Futures.10.1007/978-1-4020-6528-6_18 ↗
39. Schumacher, P. (2016). Parametricism 2.0: Rethinking Architecture's Agenda for the 21st Century. Retrieved from https://ebookcentral.proquest.com/lib/snulibrary-ebooks/detail.action?docID=4658587
40. Segerman., (2012). 3D Printing for Mathematical Visualisation. The Mathematical Intelligencer, 34(4), 56–62.10.1007/s00283-012-9319-7 ↗
41. Skelton, R. E., Fraternali, F., Carpentieri, G., & Micheletti, A. (2014). Minimum mass design of tensegrity bridges with parametric architecture and multiscale complexity. Mechanics Research Communications, 58, 124–132.10.1016/j.mechrescom.2013.10.017 ↗
42. Sun, D., & Valtas, A. (2016). 3D printing for garments production: An exploratory study. Journal of Fashion Technology and Textile Engineering. https://doi.org/10.4172/2329-9568.1000139.10.4172/2329-9568.1000139 ↗
43. Sun, L., & Zhao, L. (2017). Envisioning the era of 3D printing: a conceptual model for the fashion industry. Fashion and Textiles, 4(1), 25.10.1186/s40691-017-0110-4 ↗
44. Taylor, A., & Unver, E. (2014). 3D Printing-Media Hype or Manufacturing Reality: Textiles Surface Fashion Product Architecture. Textiles Society Lecture, 17th February 2014, Textile Centre of Excellence, Huddersfield UK.
45. Tian, M., Zhao, R., Qu, L., Chen, Z., Chen, S., Zhu, S., Song, W., Zhang, X., Sun, Y. & Fu, R. (2019). Stretchable and Designable Textile Pattern Strain Sensors Based on Graphene Decorated Conductive Nylon Filaments. Macromolecular Materials and Engineering, 304(10). https://doi.org/10.1002/mame.201900244.10.1002/mame.201900244 ↗
46. Unger, L., Scheideler, M., Meyer, P., Harland, J., Görzen, A., Wortmann, M., et al. (2018). Increasing adhesion of 3D printing on textile fabrics by polymer coating. Tekstilec, 61, 4.10.14502/Tekstilec2018.61.265-271 ↗
47. Vanderploeg, A., Lee, S. E., & Mamp, M. (2017). The application of 3D printing technology in the fashion industry. International Journal of Fashion Design, Technology and Education, 10(2), 170–179.10.1080/17543266.2016.1223355 ↗
48. Wang, L. (2014). A study on a trend of parametric non-linear architecture design in China. Design Convergence Study, 13(1), 20–34.
49. Yap, Y. L., & Yeong, W. Y. (2014). Lifestyle product via 3D printing: wearable fashion. Proceedings of the 1st International Conference on Progress in Additive Manufacturing (Pro-AM 2014), 393–398.10.3850/978-981-09-0446-3_116 ↗
50. Yoon, S. R. (2018). 3-D textile design processes with geometric principles of parametric tessellation. Bulletin of Korean Society of Basic Design & Art, 19(5), 513–528.10.47294/KSBDA.19.5.37 ↗