Innovative Testing Machines and Methodologies for the Mechanical Characterization of Materials
Source abstract
Abstract
This paper is focused on the development of innovative testing machines and methodologies for the characterization of materials in working conditions similar to those found in mechanical processing of materials. Special emphasis is given to the design, fabrication, and instrumentation of a flexible drop weight testing machine, an electromagnetic compressive Hopkinson bar, and an electromagnetic cam-driven compression testing machine that are capable of performing the mechanical characterization of materials under mediumand high rates of loading. The fundamentals of plastic flow in selected forming and cutting processes are utilized to assess the validity and reliability of the proposed testing machines and associated experimental methodologies. Experimental data with technical pure Lead allows understanding the combined influence of strain, strain rate, and strain rate versus strain loading paths in the overall stress response of the materials. Results also show that the new proposed electromagnetic cam-driven compression testing machine equipped with a root type or logistic cam profile can successfully replicate the operating conditions of the two other testing machines.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Tekkaya, A.E., and Martins, P.A.F., “Accuracy, Reliability and Validity of Finite Element Analysis in Metal Forming: A User’s Perspective,” Engineering Computations 26: 1026–1055 (2009).10.1108/02644400910996880 ↗
2. Nemat-Nasser, S., “Introduction to High Strain Rate Testing,” ASM Handbook, Mechanical Testing and Evaluation, American Society for Metals International, Materials Park, OH (2000).
3. Poulachon, G., Moisan, A.L., and Jawahir, I.S., “Evaluation of Chip Morphology in Hard Turning Using Constitutive Models and Material Property Data,” Journal of Manufacturing Science and Engineering 129: 41–47 (2006).10.1115/1.2335850 ↗
4. Bariani, P.F., Dal, N.T., and Bruschi, S., “Testing and Modelling of Material Response to Deformation in Bulk Metal Forming,” CIRP Annals – Manufacturing Technology 53: 573–595 (2004).10.1016/S0007-8506(07)60030-4 ↗
5. Grässel, O., Krüger, L., Frommeyer, G., and Meyer, L.W., “High Strength Fe–Mn–(Al, Si) TRIP/TWIP Steels Development - Properties - Application,” International Journal of Plasticity 16: 1391–1409 (2000).10.1016/S0749-6419(00)00015-2 ↗
6. Diot, S., Guines, D., Gavrus, A., and Ragneau, E., “Two-Step Procedure for Identification of Metal Behavior from Dynamic Compression Tests,” International Journal of Impact Engineering 34: 1163–1184 (2007).10.1016/j.ijimpeng.2006.07.003 ↗
7. Wang, Z.J., and Cheng, L.D., “Experimental Research and Numerical Simulation of the Dynamic Cylinder Upsetting,” Materials Science and Engineering A 499: 138–141 (2009).10.1016/j.msea.2007.11.128 ↗
8. Li, G., and Liu, D., “Low Strain Rate Testing Based on Drop Weight Impact Tester,” Experimental Techniques (early online version). doi:10.1111/j.1747-1567.2012.00862.x (2012).10.1111/j.1747-1567.2012.00862.x ↗
9. Lindholm, U.S., and Yeakley, L.M., “High Strain Rate Testing: Tension and Compression,” Experimental Mechanics 8: 1–9 (1968).10.1007/BF02326244 ↗
10. Mylonas, G.I., and Labeas, G.N., “Mechanical Characterisation of Aluminium Alloy 7449-T7651 at High Strain Rates and Elevated Temperatures Using Split Hopkinson Bar Testing,” Experimental Techniques 38: 26–34 (2014).10.1111/j.1747-1567.2011.00796.x ↗
11. Taylor, G.I., “The Use of Flat-Ended Projectiles for Determining Dynamic Yield Stress - Theoretical Considerations,” Proceedings of the Royal Society A 194: 289–299 (1948).10.1098/rspa.1948.0081 ↗
12. Field, J.E., Walley, S.M., Proud, W.G., Goldrein, H.T., and Siviour, C.R., “Review of Experimental Techniques for High Rate Deformation and Shock Studies,” International Journal of Impact Engineering 30: 725–775 (2004).10.1016/j.ijimpeng.2004.03.005 ↗
13. Silva, C.M.A., Rosa, P.A.R., and Martins, P.A.F., “Electromagnetic Cam Driven Compression Testing Equipment,” Experimental Mechanics 52: 1211–1222 (2012).10.1007/s11340-011-9576-y ↗
14. Banabic, D., Bunge, H.-J., Pöhlandt, K., and Tekkaya, A.E., Formability of Metallic Materials, Springer, Berlin, Germany (2000).10.1007/978-3-662-04013-3 ↗
15. Guo, Y., Saldana, C., Mann, J.B., Saoubi, R.M., and Chandrasek, S., “Deformation and Microstructure in Machining,” Advanced Materials Research 223: 325–331 (2011).10.4028/www.scientific.net/AMR.223.325 ↗
16. Jaspers, S.P.F.C., and Dautzenberg, J.H., “Material Behaviour in Conditions Similar to Metal Cutting: Flow Stress in the Primary Shear Zone,” Journal of Materials Processing Technology 122: 322–330 (2002).10.1016/S0924-0136(01)01228-6 ↗
17. Altan, T., Henning, H.J., and Sabroff, A.M., “The Use of Model Materials in Predicting Forming Loads in Metalworking,” Transactions ASME, Journal of Engineering for Industry 92: 444–452 (1970).10.1115/1.3427776 ↗
18. Rothbart, H.A., Cam Design Handbook, McGraw Hill, New York, NY (2004).
19. Sima, M., and Özel, T., “Modified Material Constitutive Models for Serrated Chip Formation Simulations and Experimental Validation in Machining of Titanium Alloy Ti-6Al-4V,” International Journal of Machine Tools and Manufacture 50: 943–960 (2010).10.1016/j.ijmachtools.2010.08.004 ↗
20. Özel, T., Sima, M., and Srivastava, A., “Finite Element Simulation of High Speed Machining Ti-6Al-4V Alloy Using Modified Material Models,” Transactions of the NAMRI/SME 38: 49–56 (2010).
21. Calamaz, M., Coupard, D., and Girot, F., “A New Material Model for 2D Numerical Simulation of Serrated Chip Formation When Machining Titanium Alloy Ti–6Al–4V,” International Journal of Machine Tools and Manufacture 48: 275–288 (2008).10.1016/j.ijmachtools.2007.10.014 ↗