journal article·2026-05Open access

A high-energy long-cycling solid-state lithium–oxygen battery enabled by plasmon-enhanced solar induced reversible oxygen conversion to Li2O

Min Wang, Hucheng Song, Yipeng Ye, Yijie Liu, Linwei Yu, Jun Xu, Kunji Chen

eScience· Volume 6· Issue 3

Abstract

Lithium–oxygen (Li–O 2 ) battery with a reversible conversion between oxygen and lithium oxide (Li 2 O) offers the highest theoretical specific energy among all lithium-battery systems. However, enabling the O 2 /Li 2 O redox reaction to be fully reversible requires high operating temperatures (> 150 °C) due to thermodynamic constraints. Here, we report a room temperature (RT) solid-state Li–O 2 battery by solar induced reversible O 2 /Li 2 O conversion reaction. The oxygen reaction and oxygen evolution at the air cathode is driven by energetic hot carriers generated from plasmonic ruthenium nanostructures. These carriers activate O 2 molecules, cleave O–O bonds, and facilitate the formation and decomposition of the Li 2 O products via plasmon-induced four-electron (O 2 /Li 2 O) conversion process on discharge and charge, thus enabling a capacity more than twice that of the batteries operating without solar irradiation. Meanwhile, the Li/solid-state interface is stabilized by a molten-salt-interlayer (MSI), which promotes an ultra-flat and electrochemically stable interface throughout cycling under solar irradiation. By combining the plasmon-enhanced cathode and MSI-stabilized Li-anode, the solid-state Li–O 2 battery exhibits exceptional cycling performance over 350 cycles with a capacity limitation of 1000 mAh g −1 at a high current density of at 10.0 A g −1 . This dual-functional battery design enables room-temperature solid-state Li–O 2 batteries, advancing the development of next-generation high-energy density lithium metal battery. • A high-energy long-cycling solid-sate Li–O 2 battery based on a reversible 4/e − conversion reaction between O 2 and Li 2 O has been obtained at RT. • Energetic hot carries generated from plasmonic hybrid Ru nanostructures catalyst on the cathode enables reversible O 2 /Li 2 O conversion under solar irradiation. • Solar-induced heat transferred to the LAGP/Li interface, stabilized by a MSI, can effectively heal Li-dendrites, thereby significantly improving the cycling stability of the battery.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A reversible and higher-rate Li–O2 battery10.1126/science.1223985 ↗
2. Li–air batteries hitting the road10.1038/s41578-023-00546-0 ↗
3. Photoelectrochemistry of oxygen in rechargeable Li–O2 batteries10.1039/D1CS00877C ↗
4. Reaction chemistry in rechargeable Li–O2 batteries10.1039/C6CS00929H ↗
5. A lithium–oxygen battery based on lithium superoxide10.1038/nature16484 ↗
6. A high-energy-density lithium–oxygen battery based on a reversible four-electron conversion to lithium oxide10.1126/science.aas9343 ↗
7. Lithium–oxygen batteries: bridging mechanistic understanding and battery performance10.1039/c3ee23966g ↗
8. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
9. Ductile inorganic solid electrolytes for all-solid-state lithium batteries10.1021/acs.chemrev.4c00894 ↗
10. Revealing the impact of space-charge layers on Li-ion transport in all-solid-state batteries10.1016/j.joule.2020.04.002 ↗
11. Solar-driven all-solid-state lithium–air batteries operating at extreme low temperatures10.1039/C9EE04039K ↗
12. Fast Li+ ion conducting glass-ceramics in the system Li2O–Al2O3–GeO2–P2O510.1016/S0167-2738(97)00434-7 ↗
13. All-solid-state lithium batteries with NMC955 cathodes: PVDF-free formulation with SBR and capacity recovery insights10.20517/energymater.2024.297 ↗
14. Recent advances in Sb-based anodes for Li/Na/K-ion batteries and all-solid-state Li-ion batteries10.20517/energymater.2023.146 ↗
15. Challenges in lithium metal anodes for solid-state batteries
16. Catalytic conversion of solar to chemical energy on plasmonic metal nanostructures10.1038/s41929-018-0138-x ↗
17. Plasmonic-metal nanostructures for efficient conversion of solar to chemical energy10.1038/nmat3151 ↗
18. The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries10.1039/C8EE00540K ↗
19. Stabilizing the LAGP/Li interface and in situ visualizing the interfacial structure evolution for high-performance solid-state lithium metal batteries10.1039/D4EE02075H ↗
20. Interfaces and interphases in all-solid-state batteries with inorganic solid electrolytes10.1021/acs.chemrev.0c00101 ↗
21. Self-heating–induced healing of lithium dendrites10.1126/science.aap8787 ↗
22. Thermodynamic understanding of Li-dendrite formation10.1016/j.joule.2020.06.016 ↗
23. Solar-driven efficient Li2O2 oxidation in solid-state Li–O2 batteries10.1016/j.ensm.2017.10.002 ↗
24. Quantifying hot carrier and thermal contributions in plasmonic photocatalysis10.1126/science.aat6967 ↗
25. Semiconducting metal–organic polymer nanosheets for a photoinvolved Li–O2 battery under visible light10.1021/jacs.0c11400 ↗
26. Utilizing solar energy to improve the oxygen evolution reaction kinetics in zinc–air batteries10.1038/s41467-019-12627-2 ↗
27. Ultra-fine surface solid-state electrolytes for long cycle life all-solid-state lithium–air batteries10.1039/C8TA08095J ↗
28. Germanium thin film protected lithium aluminum germanium phosphate for solid-state Li batteries10.1002/aenm.201702374 ↗
29. Efficient construction of a C60 interlayer for mechanically robust, dendrite-free, and ultrastable solid-state batteries10.1016/j.isci.2020.101636 ↗
30. Challenges in lithium metal anodes for solid-state batteries10.1021/acsenergylett.9b02668 ↗
31. High-energy and long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes10.1038/s41560-020-0575-z ↗
32. Degradation of NASICON-type materials in contact with lithium metal: formation of mixed conducting interphases (MCI) on solid electrolytes10.1021/jp4051275 ↗
33. An extra-wide temperature all-solid-state lithium-metal battery operating from –73 °C to 120 °C10.1016/j.ensm.2021.04.024 ↗
34. Transient, in situ synthesis of ultrafine ruthenium nanoparticles for a high-rate Li–CO2 battery
35. Cationic size effect promoting dissolution of nitrate anion in ester electrolyte for lithium–metal batteries10.1021/acsenergylett.1c02495 ↗
36. A high-energy long-cycling solid-state lithium-metal battery operating at high temperature10.1002/aenm.202201866 ↗