Self-rechargeable energizers for sustainability
Source abstract
Abstract
Electrical energy generation and storage have always been complementary to each other but are often disconnected in practical electrical appliances. Recently, efforts to combine both energy generation and storage into self-powered energizers have demonstrated promising power sources for wearable and implantable electronics. In line with these efforts, achieving self-rechargeability in energy storage from ambient energy is envisioned as a tertiary energy storage (3rd-ES) phenomenon. This review examines a few of the possible 3rd-ES capable of harvesting ambient energy (photo-, thermo-, piezo-, tribo-, and bio-electrochemical energizers), focusing also on the devices' sustainability. The self-rechargeability mechanisms of these devices, which function through modifications of the energizers’ constituents, are analyzed, and designs for wearable electronics are also reviewed. The challenges for self-rechargeable energizers and avenues for further electrochemical performance enhancement are discussed. This article serves as a one-stop source of information on self-rechargeable energizers, which are anticipated to drive the revolution in 3rd-ES technologies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Advanced battery technologies research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Lab-on-Skin: a review of flexible and stretchable electronics for wearable health monitoring10.1021/acsnano.7b04898 ↗
2. Mini review on flexible and wearable electronics for monitoring human health information10.1186/s11671-019-3084-x ↗
3. Designing flexible, smart and self-sustainable supercapacitors for portable/wearable electronics: from conductive polymers10.1039/D1CS00800E ↗
4. Electromagnetic energy harvesting and wireless power transmission: a unified approach10.1109/JPROC.2014.2355261 ↗
5. Subterahertz wireless power transmission using 303-GHz rectenna and 300-kW-Class gyrotron10.1109/LMWC.2018.2860248 ↗
6. A wood-templated unidirectional piezoceramic composite for transmuscular ultrasonic wireless power transfer10.1039/D1EE02353E ↗
7. A long-distance high-power microwave wireless power transmission system based on asymmetrical resonant magnetron and cyclotron-wave rectifier10.1016/j.egyr.2020.12.026 ↗
8. Recent advances in the effects of microwave radiation on brains
9. Study on dose-dependent, frequency-dependent, and accumulative effects of 1.5 GHz and 2.856 GHz microwave on cognitive functions in Wistar rats10.1038/s41598-017-11420-9 ↗
10. Pulsed 3.5 GHz high power microwaves irradiation on physiological solution and their biological evaluation on human cell lines10.1038/s41598-021-88078-x ↗
11. A review of metal oxide-related microwave absorbing materials from the dimension and morphology perspective10.1007/s10854-019-01537-0 ↗
12. Porous carbon materials for microwave absorption10.1039/D0MA00662A ↗
13. A universal self-charging system driven by random biomechanical energy for sustainable operation of mobile electronics10.1038/ncomms9975 ↗
14. Ultralight cut-paper-based self-charging power unit for self-powered portable electronic and medical systems10.1021/acsnano.7b00866 ↗
15. Tandem solar flow batteries for conversion, storage, and utilization of solar energy10.1016/j.chempr.2018.10.008 ↗
16. Sustainable wearable energy storage devices self-charged by human-body bioenergy10.1002/sus2.14 ↗
17. A photocapacitor based on organometal halide perovskite and PANI/CNT composites integrated using a CNT bridge10.1039/C7TA06297D ↗
18. High-performance solution-processed double-walled carbon nanotube transparent electrode for perovskite solar cells
19. A perspective on the commercial viability of perovskite solar cells10.1002/solr.202170113 ↗
20. Integrated photo-supercapacitor based on PEDOT modified printable perovskite solar cell10.1002/admt.201600074 ↗
21. Effective energy storage from a triboelectric nanogenerator10.1038/ncomms10987 ↗
22. Unity convoluted design of solid Li-ion battery and triboelectric nanogenerator for self-powered wearable electronics10.1002/aenm.201701629 ↗
23. Dual piezoelectric energy investing and harvesting interface for high-voltage input10.3390/s21072357 ↗
24. Heterointerface engineering and piezoelectric effect enhanced performance of self-charging supercapacitors power cell10.1016/j.nanoen.2021.106701 ↗
25. Decoupling mechano- and electrochemical gating: a direct visualization for piezo-ionic propelled proton tunneling in self-charging supercapacitors10.1039/D1TA10254K ↗
26. Hybrid solar energy harvesting and storage devices: the promises and challenges, Mater
27. Hybrid dual-function thermal energy harvesting and storage technologies: towards self-chargeable flexible/wearable devices10.1039/D1DT01568K ↗
28. All-in-one energy harvesting and storage devices10.1039/C6TA01229A ↗
29. Recent advances, challenges, and prospects of piezoelectric materials for self-charging supercapacitor
30. Progress on Emerging Ferroelectric Materials for Energy Harvesting, Storage and Conversion10.1002/aenm.202270102 ↗
31. Energy harvesting towards self-powered iot devices10.3390/en13215528 ↗
32. 2020
33. 2020
34. 2021
35. Power generation for wearable systems10.1039/D0EE03911J ↗
36. J.L. Heilbron, The invention of the condenser, in: H. J. L. (Ed.) Electricity in the 17th and 18th Centuries: A Study of Early Modern Physics, University of California Press1979, pp. 309. https://www.ucpress.edu/book/9780520334595/electricity-in-the-17th-and-18th-centuries
37. Kuhn · 1996
38. Bibliographical history of electricity and magnetism, chronologically arranged10.1038/111142a0 ↗
39. The daniell cell, ohm's law, and the emergence of the international system of units10.1119/1.4826445 ↗
40. Advances in alkaline batteries10.1016/j.jpowsour.2003.09.006 ↗
41. LixCoO2 (0<x<-1): a new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
42. How we made the Li-ion rechargeable battery10.1038/s41928-018-0048-6 ↗
43. Oxide cathodes
44. Thermal stability and kinetics of delithiated LiCO210.1016/j.jpowsour.2010.09.076 ↗
45. Structural and electrochemical kinetic properties of 0.5Li2MnO3 ·0.5LiCoO2 cathode materials with different Li2MnO3 domain sizes10.1038/s41598-018-36593-9 ↗
46. Gradient-morph LiCoO2 single crystals with stabilized energy density above 3400 Wh L−110.1039/D0EE00231C ↗
47. Lithium nickel cobalt manganese oxide recovery via spray pyrolysis directly from the leachate of spent cathode scraps10.1021/acsaem.9b01647 ↗
48. Review and prospect of layered lithium nickel manganese oxide as cathode materials for Li-ion batteries10.1007/s10008-012-1977-z ↗
49. Spinel/Post-spinel engineering on layered oxide cathodes for sodium-ion batteries10.1016/j.esci.2021.10.003 ↗
50. Advanced electrode materials in lithium batteries: retrospect and prospect10.34133/2021/1205324 ↗
51. Higher, stronger, Better… A review of 5 volt cathode materials for advanced lithium-ion batteries10.1002/aenm.201200068 ↗
52. A review on cathode materials for advanced lithium ion batteries: microstructure designs and performance regulations
53. Recent advances in the design of cathode materials for Li-ion batteries10.1039/D0RA03314F ↗
54. Phosphate polyanion materials as high-voltage lithium-ion battery cathode: a review10.1021/acs.energyfuels.1c01102 ↗
55. In-situ formation of Co1−xS hollow polyhedrons anchored on multichannel carbon nanofibers as self-supporting anode for lithium/sodium-ion batteries10.1016/j.cej.2020.127755 ↗
56. Clusters induced electron redistribution to tune oxygen reduction activity of transition metal single-atom for metal–air batteries
57. Interfacial electronic coupling of ultrathin transition-metal hydroxide nanosheets with layered MXenes as a new prototype for platinum-like hydrogen evolution10.1039/D1EE02538D ↗
58. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
59. A chronicle review of nonsilicon (Sn, Sb, Ge)-Based lithium/sodium-ion battery alloying anodes10.1002/smtd.202000218 ↗
60. Recent advances in alloy-based anode materials for potassium ion batteries10.1007/s12598-020-01454-w ↗
61. Tailoring the structure of silicon-based materials for lithium-ion batteries via electrospinning technology10.1016/j.esci.2021.11.006 ↗
62. Solid electrolyte interface stabilization via surface oxygen species functionalization in hard carbon for superior performance sodium-ion batteries10.1039/C9TA12429B ↗
63. Mechanisms for stable solid electrolyte interphase formation and improved cycling stability of tin-based battery anode in fluoroethylene carbonate-containing electrolyte10.1002/admi.201600172 ↗
64. Understanding the effect of electrolyte on the cycle and structure stability of high areal capacity Si-Al film electrode10.1007/s11581-018-2816-8 ↗
65. Stabilizing the solid electrolyte interphase layer and cycling performance of silicon–graphite battery anode by using a binary additive of fluorinated carbonates10.1021/acs.jpcc.6b07570 ↗
66. The critical role of carbon in marrying silicon and graphite anodes for high-energy lithium-ion batteries10.1002/cey2.2 ↗
67. Nanostructured conversion-type Anode materials for advanced lithium-ion batteries10.1016/j.chempr.2018.01.003 ↗
68. A critical review-promises and barriers of conversion electrodes for Li-ion batteries10.1007/s10008-017-3580-9 ↗
69. Conversion-type Anode materials for alkali-ion batteries: state of the art and possible research directions10.1021/acsomega.8b00188 ↗
70. Unraveling synergistic mixing of SnO2–TiO2 composite as anode for Li-ion battery and their electrochemical properties10.1557/s43578-021-00313-3 ↗
71. Quasi-anisotropic benefits in electrospun nickel–cobalt–manganese oxide nano-octahedron as anode for lithium-ion batteries10.1039/D2NJ01462A ↗
72. Electrospun ternary composite metal oxide fibers as an anode for lithium-ion batteries10.3389/fmats.2022.815204 ↗
73. Void-size-matched hierarchical 3D titania flowers in porous carbon as an electrode for high-density supercapacitive charge storage10.1016/j.jallcom.2020.157649 ↗
74. Void space control in porous carbon for high-density supercapacitive charge storage10.1021/acs.energyfuels.0c00737 ↗
75. Creating ultrahigh surface area functional carbon from biomass for high performance supercapacitor and facile removal of emerging pollutants10.1016/j.cej.2021.131477 ↗
76. Controlling the effective surface area and pore size distribution of sp2 carbon materials and their impact on the capacitance performance of these materials10.1021/ja402552h ↗
77. The capacitance properties of activated carbon obtained from chitosan as the electrode material for electrochemical capacitors10.1016/j.matlet.2016.03.031 ↗
78. Capacitive behavior of functionalized activated carbon-based all-solid-state supercapacitor10.1007/s42823-020-00219-w ↗
79. Preparation and characterization of manganese oxide nanosheets for pseudocapacitor application
80. Mixed-valence manganese oxide/reduced graphene oxide composites with enhanced pseudocapacitive performance10.1007/s10853-021-06613-7 ↗
81. Extending the cycle life of high mass loading MoOx electrode for supercapacitor applications10.1016/j.electacta.2019.134877 ↗
82. Advances on three-dimensional electrodes for micro-supercapacitors: a mini-review10.1002/inf2.12007 ↗
83. Thin metal film on porous carbon as a medium for electrochemical energy storage10.1016/j.jpowsour.2021.229522 ↗
84. 6 - metal oxide–carbon composites for supercapacitor applications
85. Quantitative investigation of the decomposition of organic lithium ion battery electrolytes with LC-MS/MS10.1039/C7RA03839A ↗
86. Clarification of decomposition pathways in a state-of-the-art lithium ion battery electrolyte through 13C-labeling of electrolyte components10.1002/anie.202000727 ↗
87. Deciphering electrolyte degradation10.1038/s41560-019-0524-x ↗
88. Voltage dependent solid electrolyte interphase formation in silicon electrodes: monitoring the formation of organic decomposition products10.1021/acs.chemmater.5b04408 ↗
89. Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries10.1038/s41524-018-0064-0 ↗
90. LiCoO2 electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy10.1007/s11426-007-0088-7 ↗
91. Toward critical electrode/electrolyte interfaces in rechargeable batteries10.1002/adfm.201909887 ↗
92. Interfaces in solid-state lithium batteries10.1016/j.joule.2018.07.009 ↗
93. Unconventional irreversible structural changes in a high-voltage Li–Mn-rich oxide for lithium-ion battery cathodes10.1016/j.jpowsour.2015.02.087 ↗
94. Electrode degradation in lithium-ion batteries10.1021/acsnano.9b04365 ↗
95. Prospects for lithium-ion batteries and beyond—a 2030 vision10.1038/s41467-020-19991-4 ↗
96. Lattice-matching formed mesoporous transition metal oxide heterostructures advance water splitting by active Fe–O–Cu bridges10.1002/aenm.202200067 ↗
97. Electronic modulation caused by interfacial Ni-O-M (M=Ru, Ir, Pd) bonding for accelerating hydrogen evolution kinetics10.1002/anie.202110374 ↗
98. How comparable are sodium-ion batteries to lithium-ion counterparts?10.1021/acsenergylett.0c02181 ↗
99. Recent progress of electrospun nanofibers for zinc–air batteries10.1007/s42765-021-00109-4 ↗
100. Rechargeable batteries of the future—the state of the art from a BATTERY 2030+ perspective10.1002/aenm.202102904 ↗