Anode corrosion in aqueous Zn metal batteries
Source abstract
Abstract
Given their low cost and intrinsic safety, aqueous Zn metal batteries (AZMBs) are drawing increasing attention in the field of smart grids and large-scale energy storage. However, the Zn metal anode in aqueous electrolyte suffers from a critical issue, corrosion, which must be fully addressed before the practical implementation of AZMBs. In this perspective, the mechanisms of aqueous Zn metal anode corrosion in both alkaline and neutral electrolytes are compared and discussed. The methods for studying the corrosion processes and the strategies for Zn corrosion protection in AZMBs are also summarized. Finally, some expectations about potential research directions for making corrosion-resistant AZMBs a commercial reality are provided.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Solid-state lithium batteries: safety and prospects10.1016/j.esci.2022.02.008 ↗
2. A salt-in-metal anode: stabilizing the solid electrolyte interphase to enable prolonged battery cycling10.1002/adfm.202010602 ↗
3. Prelithiated Li-enriched gradient interphase toward practical high-energy NMC-silicon full cell10.1021/acsenergylett.0c02487 ↗
4. Guest pre-intercalation strategy to boost the electrochemical performance of aqueous zinc-ion battery cathodes
5. Challenges and prospects of lithium-CO2 batteries10.26599/NRE.2022.9120001 ↗
6. Simultaneous regulation of cations and anions in an electrolyte for high-capacity, high-stability aqueous zinc-vanadium batteries10.1016/j.esci.2022.03.002 ↗
7. Progress and prospect of low-temperature zinc metal batteries
8. Present and future perspective on electrode materials for rechargeable zinc-ion batteries10.1021/acsenergylett.8b01552 ↗
9. Ultrafast metal electrodeposition revealed by in situ optical imaging and theoretical modeling towards fast-charging Zn battery chemistry10.1002/anie.202116560 ↗
10. Recent advances in aqueous zinc-ion batteries10.1021/acsenergylett.8b01426 ↗
11. Deeply understanding the Zn anode behavior and corresponding improvement strategies in different aqueous Zn-based batteries10.1039/D0EE02162H ↗
12. Understanding the gap between academic research and industrial requirements in rechargeable zinc-ion batteries10.1002/batt.202000124 ↗
13. History of lithium batteries10.1007/s10008-011-1386-8 ↗
14. Environmentally friendly nickel-zinc battery for high rate applications with higher specific energy10.1149/1.3087437 ↗
15. Recent advances in materials and design of electrochemically rechargeable zinc-air batteries10.1002/smll.201801929 ↗
16. Operando visualization and multi-scale tomography studies of dendrite formation and dissolution in zinc batteries10.1016/j.joule.2018.11.002 ↗
17. Rechargeable ZnlZnSO4lMnO2-type cells10.1016/S0020-1693(00)82175-1 ↗
18. A polypyrrole-coated MnO2 carbon nanotube film cathode for rechargeable aqueous Zn-ion batteries
19. Research progresses on vanadium-based cathode materials for aqueous zinc-ion batteries
20. Towards high-voltage aqueous metal-ion batteries beyond 1.5 V: the zinc/zinc hexacyanoferrate system
21. Highly reversible zinc metal anode for aqueous batteries10.1038/s41563-018-0063-z ↗
22. A non-flammable hydrous organic electrolyte for sustainable zinc batteries10.1038/s41893-021-00800-9 ↗
23. Rechargeable nickel-3D zinc batteries: an energy-dense, safer alternative to lithium-ion10.1126/science.aak9991 ↗
24. Recent advances in zinc-air batteries10.1039/C4CS00015C ↗
25. Energetic zinc ion chemistry: the rechargeable zinc ion battery10.1002/anie.201106307 ↗
26. A high-capacity and long-life aqueous rechargeable zinc battery using a metal oxide intercalation cathode10.1038/nenergy.2016.119 ↗
27. Scientific challenges for the implementation of Zn-ion batteries10.1016/j.joule.2020.03.002 ↗
28. Recent progress in aqueous zinc-ion batteries: a deep insight into zinc metal anodes10.1039/D0TA09111A ↗
29. Aqueous zinc ion batteries: focus on zinc metal anodes10.1039/D0SC00022A ↗
30. Stabilization perspective on metal anodes for aqueous batteries
31. Toward dendrite-free and anti-corrosion Zn anodes by regulating a bismuth-based energizer10.1016/j.esci.2022.04.003 ↗
32. Challenges in material and structure design of zinc anode toward high-performance aqueous zinc-ion batteries10.1039/D0EE02079F ↗
33. Roadmap for advanced aqueous batteries: from design of materials to applications10.1126/sciadv.aba4098 ↗
34. Recent progress in electrically rechargeable zinc-air batteries
35. Recent progress of rechargeable batteries using mild aqueous electrolytes10.1002/smtd.201800272 ↗
36. Chemically resistant Cu-Zn/Zn composite anode for long cycling aqueous batteries
37. An in-depth study of Zn metal surface chemistry for advanced aqueous Zn-ion batteries10.1002/adma.202003021 ↗
38. Design of a solid electrolyte interphase for aqueous Zn batteries10.1002/anie.202103390 ↗
39. Highly reversible Zn anode enabled by controllable formation of nucleation sites for Zn-based batteries10.1002/adfm.201908528 ↗
40. An overview and future perspectives of rechargeable zinc batteries10.1002/smll.202000730 ↗
41. Deeply rechargeable and hydrogen-evolution-suppressing zinc anode in alkaline aqueous electrolyte10.1021/acs.nanolett.0c01776 ↗
42. Undesired reactions in aqueous rechargeable zinc ion batteries10.1021/acsenergylett.1c00393 ↗
43. Stable interphase chemistry of textured Zn anode for rechargeable aqueous batteries10.1016/j.scib.2022.01.010 ↗
44. Electrolyte strategies toward better zinc-ion batteries10.1021/acsenergylett.0c02684 ↗
45. Anode for zinc-based batteries: challenges, strategies, and prospects10.1021/acsenergylett.1c00939 ↗
46. Pourbaix · 1974 · 307
47. Calendar life of Zn batteries based on Zn anode with Zn powder/current collector structure
48. Interfacial parasitic reactions of zinc anodes in zinc ion batteries: underestimated corrosion and hydrogen evolution reactions and their suppression strategies10.1016/j.jechem.2021.04.016 ↗
49. Comprehensive analyses of aqueous Zn metal batteries: characterization methods, simulations, and theoretical calculations
50. Rechargeable aqueous zinc ion batteries with mild electrolytes: a comprehensive review10.1002/batt.202000060 ↗
51. Cationic surfactant-type electrolyte additive enables three-dimensional dendrite-free zinc anode for stable zinc-ion batteries10.1021/acsenergylett.0c01792 ↗
52. A sieve-functional and uniform-porous kaolin layer toward stable zinc metal anode10.1002/adfm.202000599 ↗
53. Long-life and deeply rechargeable aqueous Zn anodes enabled by a multifunctional brightener-inspired interphase10.1039/C9EE00596J ↗
54. An anticorrosive zinc metal anode with ultra-long cycle life over one year10.1039/D1EE03882F ↗
55. A patternable and in situ formed polymeric zinc blanket for a reversible zinc anode in a skin-mountable microbattery10.1002/adma.202007497 ↗
56. Designing dendrite-free zinc anodes for advanced aqueous zinc batteries10.1002/adfm.202001263 ↗
57. Tuning Zn2+ coordination tunnel by hierarchical gel electrolyte for dendrite-free zinc anode10.1016/j.scib.2022.01.027 ↗
58. Redirected Zn electrodeposition by an anti-corrosion elastic constraint for highly reversible Zn anodes
59. Highly stable Zn metal anodes enabled by atomic layer deposited Al2O3 coating for aqueous zinc-ion batteries10.1039/D0TA00748J ↗
60. A corrosion-resistant and dendrite-free zinc metal anode in aqueous systems10.1002/smll.202001736 ↗
61. Toward practical high-areal-capacity aqueous zinc-metal batteries: quantifying hydrogen evolution and a solid-ion conductor for stable zinc anodes
62. Exploring the interfacial chemistry between zinc anodes and aqueous electrolytes via an in situ visualized characterization system10.1021/acsami.0c17023 ↗
63. Surface-preferred crystal plane for a stable and reversible zinc anode
64. Textured electrodes: manipulating built-in crystallographic heterogeneity of metal electrodes via severe plastic deformation
65. Achieving ultrahigh-rate planar and dendrite-free zinc electroplating for aqueous zinc battery anodes10.1002/adma.202202552 ↗
66. Anion texturing towards dendrite-free Zn anode for aqueous rechargeable batteries10.1002/anie.202015488 ↗
67. A multifunctional artificial interphase with fluorine-doped amorphous carbon layer for ultra-stable Zn anode
68. Carbon nanomaterials for highly stable Zn anode: recent progress and future outlook10.1016/j.jelechem.2021.115883 ↗
69. The three-dimensional dendrite-free zinc anode on a copper mesh with a zinc-oriented polyacrylamide electrolyte additive10.1002/anie.201907830 ↗
70. Homogeneous deposition of zinc on three-dimensional porous copper foam as a superior zinc metal anode10.1021/acssuschemeng.9b04085 ↗
71. Integrated ‘all-in-one’ strategy to stabilize zinc anodes for high-performance zinc-ion batteries10.1093/nsr/nwab177 ↗
72. Electrodeposited zinc-based films as anodes for aqueous zinc batteries10.1021/acsami.0c10956 ↗
73. Establishing thermal infusion method for stable zinc metal anodes in aqueous zinc-ion batteries
74. Fast-charging and ultrahigh-capacity zinc metal anode for high-performance aqueous zinc-ion batteries10.1002/adfm.202100398 ↗
75. Manipulating the ion-transfer kinetics and interface stability for high-performance zinc metal anodes10.1039/C9EE03545A ↗
76. Suppressing by-product via stratified adsorption effect to assist highly reversible zinc anode in aqueous electrolyte10.1016/j.jechem.2020.07.021 ↗
77. Redistributing Zn-ion flux by interlayer ion channels in Mg-Al layered double hydroxide-based artificial solid electrolyte interface for ultra-stable and dendrite-free Zn metal anodes
78. Eliminating dendrites and side reactions via a multifunctional ZnSe protective layer toward advanced aqueous Zn metal batteries
79. Ultrafast zinc-ion-conductor interface toward high-rate and stable zinc metal batteries10.1002/aenm.202100186 ↗
80. Synergistic manipulation of Zn2+ ion flux and desolvation effect enabled by anodic growth of a 3D ZnF2 matrix for long-lifespan and dendrite-free Zn metal anodes
81. Spontaneous construction of nucleophilic carbonyl-containing interphase toward ultrastable zinc-metal anodes
82. Polypyrrole-controlled plating/stripping for advanced zinc metal anodes
83. Uniformizing the electric field distribution and ion migration during zinc plating/stripping via a binary polymer blend artificial interphase10.1039/D0TA05253A ↗
84. Stabilizing Zn anode interface by simultaneously manipulating the thermodynamics of Zn nucleation and overpotential of hydrogen evolution10.1002/adfm.202270271 ↗
85. Insight into the critical role of surface hydrophilicity for dendrite-free zinc metal anodes10.1021/acsenergylett.1c01521 ↗
86. Chemical passivation stabilizes Zn anode10.1002/adma.202109872 ↗
87. Revealing the role of crystal orientation of protective layers for stable zinc anode10.1038/s41467-020-17752-x ↗
88. Nanoporous CaCO3 coatings enabled uniform zn stripping/plating for long-life zinc rechargeable aqueous batteries10.1002/aenm.201801090 ↗
89. A chemically polished zinc metal electrode with a ridge-like structure for cycle-stable aqueous batteries10.1021/acsami.0c05661 ↗
90. Localizing concentrated electrolyte in pore geometry for highly reversible aqueous Zn metal batteries10.1016/j.cej.2021.129642 ↗
91. A replacement reaction enabled interdigitated metal/solid electrolyte architecture for battery cycling at 20 mAcm-2 and 20 mAh cm-210.1021/jacs.0c11753 ↗
92. Site-selective adsorption on ZnF2/Ag coated Zn for advanced aqueous zinc–metal batteries at low temperature10.1021/acs.nanolett.1c04975 ↗
93. Stimulating Cu-Zn alloying for compact Zn metal growth towards high energy aqueous batteries and hybrid supercapacitors10.1039/D2EE00617K ↗
94. Intercalation of organics into layered structures enables superior interface compatibility and fast charge diffusion for dendrite-free Zn anodes10.1039/D1EE03624F ↗
95. Highly reversible zinc metal anodes enabled by a three-dimensional silver host for aqueous batteries10.1039/D2TA00326K ↗
96. A molecular-sieve electrolyte membrane enables separator-free zinc batteries with ultralong cycle life10.1002/adma.202207209 ↗
97. Reversible aqueous Zn battery anode enabled by a stable complexation adsorbent interface10.1002/eom2.12167 ↗
98. Stabilizing zinc anode via a chelation and desolvation electrolyte additive
99. Dual-function electrolyte additive for highly reversible Zn anode10.1002/aenm.202102010 ↗
100. Electrolyte design for in situ construction of highly Zn2+ -conductive solid electrolyte interphase to enable high-performance aqueous Zn-ion batteries under practical conditions10.1002/adma.202007416 ↗