Investigation of austenitic stainless steel corrosion resistance against ash deposits from co-combustion coal and biomass waste
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Coal and Its By-products · Thermochemical Biomass Conversion Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Failure analysis of platen superheater tube, water wall tube, and sealpot plate: A case study from electricity power plant in indonesia10.1016/j.engfailanal.2022.106108 ↗
2. High temperature corrosion and remaining lifetime assessment of ferritic steel 13CrMo4-4 tubes in a convective superheater of a CFB oil shale boiler10.1016/j.corsci.2019.108311 ↗
3. Chlorine Corrosion in a Low-Power Boiler Fired with Agricultural Biomass10.3390/en15010382 ↗
4. Mineral phase transformation of biomass ashes – Experimental and thermochemical calculations10.1016/j.renene.2017.05.057 ↗
5. Non-destructive diagnostic methods for fire-side corrosion risk assessment of industrial scale boilers, burning low quality solid biofuels—a mini review10.3390/en14217132 ↗
6. Review of the use of additives to mitigate operational problems associated with the combustion of biomass with high content in ash-forming species10.1016/j.rser.2020.110502 ↗
7. Simultaneous melt and vapor induced ash deposit aging mechanisms – Mathematical model and experimental observations10.1016/j.ces.2017.07.041 ↗
8. Alkali metals association in biomass and their impact on ash melting behaviour10.1016/j.fuel.2019.116421 ↗
9. Investigation of fireside corrosion of austenitic heat-resistant steel 10Cr18Ni9Cu3NbN in ultra-supercritical power plants10.1016/j.engfailanal.2019.02.048 ↗
10. Characteristics of chlorine releasing from coal-fired power plant
11. Effect of temperature gradient on composition and morphology of synthetic chlorine-containing biomass boiler deposits10.1016/j.fuproc.2015.10.011 ↗
12. Investigation of chloride deposit formation in a 24 MWe waste to energy plant10.1016/j.fuel.2014.09.112 ↗
13. Characteristics of Corrosion Related to Ash Deposition on Boiler Heating Surface during Cofiring of Coal and Biomass10.1155/2020/2175795 ↗
14. High-temperature corrosion in a multifuel circulating fluidized bed (CFB) boiler co-firing refuse derived fuel (RDF) and hard coal10.1016/j.fuel.2022.124749 ↗
15. Hariana, F.Karuana, Prabowo, E. Hilmawan, A. Darmawan, M. Aziz, Effects of Different Coals for Co-Combustion with Palm Oil Waste on Slagging and Fouling Aspects, Combust. Sci. Technol. 00 (2022) 1–23, doi:10.1080/00102202.2022.2152684.10.1080/00102202.2022.2152684 ↗
16. Hariana, H.P.Putra, Prabowo, E. Hilmawan, A. Darmawan, K.M. Mochida, M.Aziz,Theoretical and experimental investigation of ash-related problems during coal co-firing with different types of biomass in a pulverized coal-fired boiler, Energy 269 (2023) 126784, doi:10.1016/j.energy.2023.126784.10.1016/j.energy.2023.126784 ↗
17. Hariana, Prabowo, E. Hilmawan, F. Milky Kuswa, A. Darmawan, M. Aziz, A comprehensive evaluation of cofiring biomass with coal and slagging-fouling tendency in pulverized coal-fired boilers, Ain Shams Eng. J. 14 (2022) 102001, doi:10.1016/j.asej.2022.102001.10.1016/j.asej.2022.102001 ↗
18. Slagging tendencies of wood pellet ash during combustion in residential pellet burners10.1016/j.biombioe.2003.08.016 ↗
19. Slagging characteristics during combustion of cereal grains rich in phosphorus10.1021/ef060429x ↗
20. E. Sadeghi, N. Markocsan, S. Joshi, Advances in Corrosion-Resistant Thermal Spray Coatings for Renewable Energy Power Plants. Part I: Effect of Composition and Microstructure, Springer US, 2019. 10.1007/s11666-019-00938-1.10.1007/s11666-019-00938-1 ↗
21. ASTM312, American Society for Testing and Materials Information Handling Services, (n.d.).
22. The importance of SO2 and SO3 for sulphation of gaseous KCl - An experimental investigation in a biomass fired CFB boiler10.1016/j.combustflame.2010.05.012 ↗
23. T. Blomberg, Role of potassium hydroxide in fouling and fire side corrosion processes in biomass - fired boilers, Materials, Applied. (2020).
24. The effect of mineral additives on the process of chlorine bonding during combustion and co-combustion of Solid Recovered Fuels10.1016/j.wasman.2019.10.032 ↗
25. Strategy for the application of novel characterization methods for biomass fuels: Case study of straw10.1021/ef402249x ↗
26. Fuel indexes: A novel method for the evaluation of relevant combustion properties of new biomass fuels10.1021/ef201282y ↗
27. E. Raask, Mineral impurities In Coal Combustion (Behavior, Problems, And Remedial Measures), Hemisphere publishing Corporation, London, 1985.
28. The fate of chlorine during MSW incineration: Vaporization, transformation, deposition, corrosion and remedies10.1016/j.pecs.2019.100789 ↗
29. Investigation on K and Cl release and migration in micro-spatial distribution during rice straw pyrolysis10.1016/j.fuel.2015.11.030 ↗
30. Impact of Alkalis and Chlorides from Sugarcane Agriculture Residues on High Temperature Corrosion: A Review10.1007/s11085-022-10102-w ↗
31. Impact of Alkalis and Chlorides from Sugarcane Agriculture Residues on High Temperature Corrosion : A Review
32. Investigation of high temperature corrosion resistance of Ni25Cr coated and bare 347H SS in actual husk fired boiler atmosphere10.1016/j.engfailanal.2019.104256 ↗
33. Ash deposition of Zhundong coal in a 350 MW pulverized coal furnace: Influence of sulfation10.1016/j.fuel.2019.116317 ↗
34. Experimental Study on Morphology and Chemical Composition of Ash Deposition during Oxy-fuel Combustion of High-Alkali Coal10.1021/acs.energyfuels.9b00028 ↗
35. Superheater deposits and corrosion in temperature gradient – Laboratory studies into effects of flue gas composition, initial deposit structure, and exposure time10.1016/j.energy.2021.120494 ↗
36. A calculation model for the overall process of high temperature corrosion mechanism induced by firing coal with high chlorine and sodium content10.1016/j.energy.2020.118073 ↗
37. Ash formation and deposition in coal and biomass fired combustion systems: Progress and challenges in the field of ash particle sticking and rebound behavior10.1016/j.pecs.2018.02.001 ↗
38. Slagging and fouling of Zhundong coal at different air equivalence ratios in circulating fluidized bed10.1016/j.fuel.2017.05.065 ↗
39. Effects of biomass blending, ashing temperature and potassium addition on ash sintering behaviour during co-firing of pine sawdust with a Chinese anthracite10.1016/j.renene.2019.10.047 ↗
40. Intensive exploration of the fuel characteristics of biomass and biochar from oil palm trunk and oil palm fronds for supporting increasing demand of solid biofuels in Thailand10.1016/j.egyr.2022.04.033 ↗
41. Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures10.1016/j.pecs.2015.09.003 ↗
42. Fouling and slagging characteristics during co-combustion of coal and biomass10.15376/biores.12.3.6322-6341 ↗
43. Biomass fly-ash deposition: Dependence of deposition rate on probe/particle temperature in 115–1200 °C range10.1016/j.fuel.2020.120033 ↗
44. Minor element effect on high temperature corrosion of a low-alloyed steel: Insight into alkali- and chlorine induced corrosion by means of atom probe tomography10.1016/j.corsci.2021.109779 ↗
45. Mitigation of fireside corrosion of stainless steel in power plants: A laboratory study of the influences of SO2 and KCl on initial stages of corrosion10.1021/ef402127h ↗
46. Implications of chlorine-associated corrosion on the operation of biomass-fired boilers10.1016/S0360-1285(00)00003-4 ↗
47. H. Ghazidin, Suyatno, M.Z.E. Prayoga, H.P. Putra, U. Priyanto, A. Prismantoko, A. Darmawan, Hariana, A comprehensive evaluation of slagging and fouling indicators for solid fuel combustion, Thermal Science and Engineering Progress. 40 (2023) 101769. 10.1016/j.tsep.2023.101769.10.1016/j.tsep.2023.101769 ↗
48. Investigating potential co-firing of corn cobs with lignite for energy production. Thermal analysis and behavior of ashes
49. Effect of chemical composition on the fusion behaviour of synthetic high-iron coal ash10.1016/j.fuel.2019.05.135 ↗
50. Experimental Study of the Reactions of Supercritical CO2 and Minerals in High-Rank Coal under Formation Conditions10.1021/acs.energyfuels.7b02650 ↗
51. Corrosive Effect of Wood Ash Produced by Biomass Combustion on Refractory Materials in a Binary Al–Si System10.3390/ma15165796 ↗
52. Understanding Ash Deposition for the Combustion of Zhundong Coal: Focusing on Different Additives Effects10.1021/acs.energyfuels.8b00384 ↗
53. Investigation of Slagging Characteristics on Middle and low temperature heat transfers by Burning High Sodium and Iron coal10.1080/00102202.2020.1830768 ↗
54. Stratification and Chemistry Evolution of Ash Deposits during Combustion of Zhundong Lignite in a Drop Tube Furnace10.1016/j.egypro.2017.03.904 ↗
55. The fusion characteristics of ashes from anthracite and biomass blends10.1016/j.joei.2017.05.001 ↗
56. Relationship between coal ash composition and ash fusion temperatures10.1016/j.fuel.2012.06.046 ↗
57. Failure mechanism of superheater tubes of waste heat boiler for waste incineration in complex environment10.1016/j.engfailanal.2022.106457 ↗
58. Corrosion in biomass combustion: A materials selection analysis and its interaction with corrosion mechanisms and mitigation strategies10.1016/j.corsci.2013.07.013 ↗
59. Chlorine-Induced High-Temperature Corrosion of Boiler Steels Combusting Sha Erhu Coal Compared to Biomass10.1021/acs.energyfuels.7b03143 ↗
60. Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion10.1016/j.corsci.2019.07.003 ↗
61. Experimental study on corrosion of steels for flue gas reheaters in a coal-fired power plant10.1016/j.applthermaleng.2016.12.066 ↗
62. Hot corrosion studies of boiler steels exposed to different molten salt mixtures at 950 °C10.1016/j.engfailanal.2019.02.013 ↗
63. Hot corrosion of Fe and Ni-based alloys in Wase-to-energy environment at 850 °C10.1016/j.engfailanal.2021.105964 ↗
64. Failure analysis of sulphidation-oxidation corrosion of Incoloy 800HT superheater tube10.1016/j.engfailanal.2022.106798 ↗
65. The influence of a KCl-rich environment on the corrosion attack of 304 L: 3D FIB/SEM and TEM investigations10.1016/j.corsci.2021.109315 ↗
66. A microstructural investigation into the accelerated corrosion of P91 steel during biomass co-firing10.1016/j.corsci.2016.03.028 ↗
67. On Calculation of Fractal Dimension of Color Images
68. A comparative study on the high temperature corrosion of TP347H stainless steel, C22 alloy and laser-cladding C22 coating in molten chloride salts10.1016/j.corsci.2014.03.012 ↗
69. Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 °C10.1016/j.corsci.2018.02.047 ↗
70. Theory and practice of corrosion related to ashes and deposits in a WtE boiler10.1016/j.wasman.2017.11.031 ↗