Volumetric 3D Printing of Endoskeletal Soft Robots

Abstract Computed Axial Lithography (CAL) is an emerging technology for manufacturing complex parts, all at once, by circumventing the traditional layered approach using tomography. Overprinting, a unique additive manufacturing capability of CAL, allows for a 3D geometry to be formed around a prepositioned insert where the occlusion of light is compensated for by the other angular projections. This method opens the door for novel applications within additive manufacturing for multi‐material systems such as endoskeletal robots. Herein, this work presents one such application with a simple Gelatin Methacrylate (GelMA)hydrogel osmotic actuator with an embedded endoskeletal system. GelMA is an ideal material for this application as it is swellable and has reversible thermal gelation, enabling suspension of the endoskeleton during printing. By tuning the material formulation, the actuator design, and post‐processing, swelling‐induced bending actuation of 60 degrees is achieved. To aid in the printing process, a simple computational method for determining the absolute dose absorbed by the resin allowing for print time prediction is also proposed.