Numerical simulation of metal hose wear based on dynamic wear model

1. Braided metal hose flexible connector exhaust flexible tube10.1177/1756287212470696 ↗

2. Development of deep reinforcement learning-based fault diagnosis method for rotating machinery in nuclear power plants10.1016/j.pnucene.2022.104401 ↗

3. Online autonomous calibration of digital twins using machine learning with application to nuclear power plants10.1016/j.apenergy.2022.119995 ↗

4. A study on the axial behavior of bonded flexible marine hoses10.1007/s40868-016-0015-x ↗

5. A hybrid sliding mode controller approach for level control in the nuclear power plant steam generators10.1016/j.aej.2022.08.046 ↗

6. Renewable energy and climate change10.1016/j.rser.2022.112111 ↗

7. The role of innovation and technology in sustaining the petroleum and petrochemical industry10.1016/j.techfore.2017.03.003 ↗

8. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗

9. Improving flow to achieve lean manufacturing in shipbuilding10.1080/095372899233280 ↗

10. High efficiency electric power generation: the environmental role10.1016/j.pecs.2006.08.002 ↗

11. An exploratory study of manufacturing strategy practices of machinery manufacturing companies in India10.1016/j.omega.2004.10.009 ↗

12. Construction 4.0: a literature review10.3390/su12229755 ↗

13. Food is medicine: actions to integrate food and nutrition into healthcare

14. An approach for green supplier selection in the automobile manufacturing industry10.1108/K-01-2015-0034 ↗

15. Environmental protection, the economy, and jobs: national and regional analyses10.1016/j.jenvman.2006.11.028 ↗

16. Negative thermal expansion materials: technological key for control of thermal expansion10.1088/1468-6996/13/1/013001 ↗

17. Bishop RED, Bishop R, Johnson D. The mechanics of vibration: Cambridge University Press; 2011. DOI: 10.1016/0022-5096(61)90021-7.10.1016/0022-5096(61)90021-7 ↗

18. Failure analysis of irreversible changes in the construction of the damaged rubber hoses10.1016/j.engfailanal.2015.08.042 ↗

19. Gan C, Chen Y, Wan F, Lu X. Failure analysis and optimization design of metal hose under vibration loads. Engineering Failure Analysis. 2025:109818. DOI: 10.1016/j.engfailanal.2025.109818.10.1016/j.engfailanal.2025.109818 ↗

20. Chen C, Wang B, Chen Y. Leakage Cause Analysis and Prevention of Metal Hose. Pressure Vessel Technology.35:67-73. DOI: 10.3969/j.issn.1001–4837.2018.04.011.

21. Numerical tribology of a dry contact10.1016/j.triboint.2011.02.008 ↗

22. Elevated-temperature tribology of metallic materials10.1016/j.triboint.2010.01.003 ↗

23. Tribology review of blended bulk polymers and their coatings for high-load bearing applications10.1016/j.triboint.2018.08.002 ↗

24. High temperature tribology of ceramics10.1016/0301-679X(89)90168-0 ↗

25. Numerical simulation of die wear of automobile covering parts based on dynamic wear model

26. Study on friction and wear behavior of gray cast iron with different carbon content at different temperatures10.1088/2053-1591/ad36b3 ↗

27. Study on the friction and wear properties of 7075-T6 aluminum alloy enhanced by milling and ultrasonic impact treatment10.1016/j.vacuum.2024.113699 ↗

28. Dynamic changes of mechanical properties induced by friction in the Archard wear model10.1016/j.wear.2019.04.004 ↗

29. Material removal analysis for compliant polishing tool using adaptive meshing technique and Archard wear model10.1016/j.wear.2018.11.015 ↗

30. Numerical calculation of wear in rolling contact based on the Archard equation: effect of contact parameters and consideration of uncertainties

31. Parameter optimization of the archard model-based wheel wear prediction using a data-driven approach: methodology and verification10.1016/j.wear.2025.206171 ↗

32. Tribology: friction and wear of engineering materials

33. Zum Gahr K-H. Microstructure and wear of materials: Elsevier; 1987. DOI: 10.1016/0043-1648(88)90112-3.10.1016/0043-1648(88)90112-3 ↗

34. Principles of abrasive wear10.1016/0043-1648(74)90102-1 ↗

35. Adhesive wear behaviour of cast aluminium–silicon alloys: Overview10.1016/j.matdes.2009.11.038 ↗

36. Prediction of Archard's wear coefficient for metallic sliding friction assuming a low cycle fatigue wear mechanism10.1016/0043-1648(86)90188-2 ↗

37. Corrosive wear failure analysis in a natural gas pipeline10.1016/j.wear.2007.01.123 ↗

38. Abrasive wear

39. Modeling adhesive wear in asperity and rough surface contacts: a review10.3390/ma15196855 ↗

40. Gear tooth contact analysis and its application in the reduction of fatigue wear10.1016/j.wear.2006.06.019 ↗

41. Wear and corrosion wear of medium carbon steel and 304 stainless steel10.1016/j.wear.2004.12.037 ↗

42. Effects of sliding velocity and normal load on the tribological behavior of a nanocrystalline Al based composite10.1016/j.wear.2009.12.027 ↗

43. Effect of sliding velocity on wear rate of fibrous polymer composites10.1016/0043-1648(87)90182-7 ↗

44. Strong and tough cellulose hydrogels via solution annealing and dual cross‐linking10.1002/smll.202301204 ↗

45. The stored energy of cold work10.1016/0079-6425(73)90001-7 ↗

46. Calculating quenching weights10.1103/PhysRevD.68.014008 ↗

47. Laminar plasma quenching-tempering: a rapid surface heat treatment technique for controllable modification of the rail steel10.1016/j.surfcoat.2023.130029 ↗