Anatase titanium dioxide as rechargeable ion battery electrode - A chronological review
Source abstract
Abstract
Abstract Anatase titanium dioxide (TiO2) has attracted considerable attention as a promising alternative rechargeable ion battery electrode due to excellent operation safety, good reversible capacity, huge natural abundance, and good environmental friendliness. However, several intrinsic critical drawbacks including relatively low capacity and poor electric conductivity significantly limit its practical application. Large amount of research has been performed to solve these issues, resulting in three well-developed optimization strategies including decreasing the material size to nanoscale, compositing anatase TiO2 with electron conductive components, and constructing hierarchical structures. In this review, considerable studies about anatase TiO2 electrode materials are summarized in a chronological perspective. Unique insights into the general and detailed evolution trends of the research on applications of anatase TiO2 electrode materials in energy storage devices are provided. In addition, a spotlight on the future trends to advance both the fundamental understanding and practical applications of the anatase TiO2 electrode materials is provided.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Emissions Gap Report 2019, United Nations Environment Programme, 2019. https://www.unep.org/resources/emissions-gap-report-2019
2. Recycling lithium-ion batteries from electric vehicles10.1038/s41586-019-1682-5 ↗
3. Recycling end-of-life electric vehicle lithium-ion batteries10.1016/j.joule.2019.09.014 ↗
4. Hybrid electric vehicles and their challenges: A review10.1016/j.rser.2013.08.097 ↗
5. Integration of electric vehicles in the electric power system10.1109/JPROC.2010.2066250 ↗
6. Thermal runaway mechanism of lithium ion battery for electric vehicles: A review10.1016/j.ensm.2017.05.013 ↗
7. Metal oxide/graphene composite anode materials for sodium-ion batteries10.1016/j.ensm.2018.06.027 ↗
8. Research progress on negative electrodes for practical Li‐ion batteries: beyond carbonaceous anodes10.1002/aenm.201402225 ↗
9. Si-based anode materials for Li-ion batteries: a mini review10.1007/s40820-014-0008-2 ↗
10. TiO2 as an active or supplemental material for lithium batteries10.1039/C5TA06888F ↗
11. The surface science of titanium dioxide10.1016/S0167-5729(02)00100-0 ↗
12. Photoinduced reactivity of titanium dioxide10.1016/j.progsolidstchem.2004.08.001 ↗
13. Titanium dioxide nanomaterials: Synthesis, properties, modifications, and applications10.1021/cr0500535 ↗
14. TiO2 photocatalysis and related surface phenomena10.1016/j.surfrep.2008.10.001 ↗
15. Understanding TiO2 Photocatalysis: Mechanisms and Materials10.1021/cr5001892 ↗
16. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
17. Synthesis of titanium dioxide (TiO2) nanomaterials10.1166/jnn.2006.160 ↗
18. Interfaces in Perovskite Solar Cells10.1002/aenm.201700623 ↗
19. Photonic crystal-assisted visible light activated TiO2 photocatalysis10.1016/j.apcatb.2018.02.039 ↗
20. Recent advances in floating TiO2-based photocatalysts for environmental application10.1016/j.apcatb.2017.12.005 ↗
21. Titanium dioxide: from engineering to applications10.3390/catal9020191 ↗
22. Fabrication and characterization of nanostructured titania films with integrated function from inorganic–organic hybrid materials10.1039/c2cs15321a ↗
23. TiO2(B) a new form of titanium-dioxide and the potassium octatitanate K2Ti8O1710.1016/0025-5408(80)90076-8 ↗
24. New hollandite oxides: TiO2(H) and K0. 06TiO210.1016/0022-4596(89)90204-1 ↗
25. Topotactic oxidation of ramsdellite-type Li0. 5TiO2, a new polymorph of titanium dioxide: TiO2(R)10.1006/jssc.1994.1337 ↗
26. High temperature crystallization of free‐standing anatase TiO2 nanotube membranes for high efficiency dye‐sensitized solar cells10.1002/adfm.201301066 ↗
27. Preparation of anatase TiO2 thin film by low temperature annealing as an electron transport layer in inverted polymer solar cells10.1016/j.apsusc.2015.02.010 ↗
28. Green energy storage materials: Nanostructured TiO2 and Sn-based anodes for lithium-ion batteries10.1039/b823474d ↗
29. Lithium intercalation in TiO2 modifications10.1039/a703935b ↗
30. The electrochemistry of nanostructured titanium dioxide electrodes10.1002/cphc.201200073 ↗
31. In situ structural changes upon electrochemical lithium insertion in nanosized anatase TiO210.1021/jp908786t ↗
32. High lithium electroactivity of nanometer‐sized rutile TiO210.1002/adma.200502723 ↗
33. Lithium insertion in nanostructured TiO2(B) architectures10.1021/ar300176y ↗
34. Rutile TiO2 submicroboxes with superior lithium storage properties10.1002/anie.201411353 ↗
35. An investigation on the effect of Li–ion cycling on the vertically aligned brookite TiO2 nanostructure
36. TiO2(B) as a promising high potential negative electrode for large-size lithium-ion batteries10.1016/j.jpowsour.2008.10.001 ↗
37. Insertion energetics of lithium, sodium, and magnesium in crystalline and amorphous titanium dioxide: A comparative first-principles study10.1016/j.jpowsour.2014.12.058 ↗
38. Unfolding the mechanism of sodium insertion in anatase TiO2 nanoparticles10.1002/aenm.201401142 ↗
39. Monitoring the sodiation mechanism of anatase TiO2 nanoparticle-based electrodes for sodium-ion batteries by operando XANES measurements10.1021/acsaem.0c02025 ↗
40. Tailored preparation methods of TiO2 anatase, rutile, brookite: mechanism of formation and electrochemical properties10.1021/cm902613h ↗
41. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
42. The birth of the lithium-ion battery10.1002/anie.201105006 ↗
43. Carbon materials for lithium-ion rechargeable batteries10.1016/S0008-6223(98)00290-5 ↗
44. Calorimetric investigation of the reactivity of the passivation film on lithiated graphite at elevated temperatures10.1016/j.electacta.2003.09.012 ↗
45. Multi-scale study of thermal stability of lithiated graphite10.1039/c1ee01786a ↗
46. Titanium‐based anode materials for safe lithium‐ion batteries10.1002/adfm.201200698 ↗
47. Mesoporous titania nanotubes: Their preparation and application as electrode materials for rechargeable lithium batteries10.1002/adma.200602189 ↗
48. Nanostructured TiO2 and its application in lithium‐Ion storage10.1002/adfm.201002724 ↗
49. Research development on sodium-ion batteries10.1021/cr500192f ↗
50. A chronicle review of nonsilicon (Sn, Sb, Ge)‐based lithium/sodium‐ion battery alloying anodes10.1002/smtd.202000218 ↗
51. Nanocrystalline anatase TiO2: a new anode material for rechargeable sodium ion batteries10.1039/c3cc45254a ↗
52. Anatase titania nanorods as an intercalation anode material for rechargeable sodium batteries10.1021/nl402747x ↗
53. Nanocrystallinity effects in lithium battery materials Aspects of nano-ionics. Part IV10.1039/b309130a ↗
54. Sustained lithium‐storage performance of hierarchical, nanoporous anatase TiO2 at high rates: Emphasis on interfacial storage phenomena10.1002/adfm.201002527 ↗
55. Definitions of pseudocapacitive materials: a brief review10.1002/eem2.12028 ↗
56. Results of crystal analysis—III10.1080/14786441608635597 ↗
57. The structures of anatase and rutile10.1021/ja01623a004 ↗
58. Electrical energy storage and intercalation chemistry10.1126/science.192.4244.1126 ↗
59. Normal-butyllithium - effective, general cathode screening agent10.1149/1.2133659 ↗
60. Non-aqueous lithium-titanium dioxide cell10.1016/0013-4686(79)80028-6 ↗
61. Rocking chair lithium battery based on nanocrystalline TiO2 (anatase)10.1149/1.2048726 ↗
62. Nanocrystalline anatase TiO2: a new anode material for rechargeable sodium ion batteries10.1039/c3cc45254a ↗
63. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
64. Emerging non-lithium ion batteries10.1016/j.ensm.2016.04.001 ↗
65. Recent progress in graphite intercalation compounds for rechargeable metal (Li, Na, K, Al)‐ion batteries10.1002/advs.201700146 ↗
66. Comprehensive new insights and perspectives into Ti-based anodes for next-generation alkaline metal (Na+, K+) ion batteries10.1002/aenm.201801888 ↗
67. Titania nanotubes prepared by chemical processing10.1002/(SICI)1521-4095(199910)11:15<1307::AID-ADMA1307>3.0.CO;2-H ↗
68. Surfactant-templated TiO2 (anatase): Characteristic features of lithium insertion electrochemistry in organized nanostructures10.1021/jp003609v ↗
69. Equilibrium lithium transport between nanocrystalline phases in intercalated TiO2 anatase10.1038/nature00901 ↗
70. Preparation and electrochemical characterization of anatase nanorods for lithium-inserting electrode material10.1021/jp036821i ↗
71. Titanium oxide nanotubes, nanofibers and nanowires10.1016/j.colsurfa.2004.04.030 ↗
72. Electrochemical performance of anatase nanotubes converted from protonated titanate hydrate nanotubes10.1149/1.1833632 ↗
73. TiO2 and SnO2@TiO2 hollow spheres assembled from anatase TiO2 nanosheets with enhanced lithium storage properties10.1039/c0cc02973d ↗
74. Constructing hierarchical spheres from large ultrathin anatase TiO2 nanosheets with nearly 100% exposed (001) facets for fast reversible lithium storage10.1021/ja100102y ↗
75. Lithium intercalation into mesoporous anatase with an ordered 3D pore structure10.1002/anie.200907099 ↗
76. Novel titania hollow nanospheres of size 28 +/- 1 nm using soft-templates and their application for lithium-ion rechargeable batteries10.1039/c1cc11902h ↗
77. Rational design of 3D dendritic TiO2 nanostructures with favorable architectures10.1021/ja208468d ↗
78. TiO2 nanocages: fast synthesis, interior functionalization and improved lithium storage properties10.1002/adma.201104546 ↗
79. Seed-assisted synthesis of highly ordered TiO2@alpha-Fe2O3 core/shell arrays on carbon textiles for lithium-ion battery applications10.1039/c2ee03396h ↗
80. Unique structural changes of three-dimensionally ordered macroporous TiO2 electrode materials during electrochemical cycling10.1002/aenm.201200416 ↗
81. TiO2 nanotube branched tree on a carbon nanofiber nanostructure as an anode for high energy and power lithium ion batteries10.1007/s12274-014-0415-1 ↗
82. Unique structural changes of three-dimensionally ordered macroporous TiO2 electrode materials during electrochemical cycling10.1002/chem.201500729 ↗
83. Highly porous TiO2 hollow microspheres constructed by radially oriented nanorods chains for high capacity, high rate and long cycle capability lithium battery10.1016/j.nanoen.2015.07.001 ↗
84. Surfactant-templating strategy for ultrathin mesoporous TiO2 coating on flexible graphitized carbon supports for high-performance lithium-ion battery10.1016/j.nanoen.2016.04.028 ↗
85. 2D sandwich-like carbon-coated ultrathin TiO2@defect-rich MoS2 hybrid nanosheets: Synergistic-effect-promoted electrochemical performance for lithium ion batteries10.1016/j.nanoen.2016.06.003 ↗
86. Structure-dependent performance of TiO2/C as anode material for Na-ion batteries10.1016/j.nanoen.2017.11.077 ↗
87. Li+ pre-insertion leads to formation of solid electrolyte interface on TiO2 nanotubes that enables high-performance anodes for sodium ion batteries10.1002/aenm.201903448 ↗
88. Two-dimensional mesoporous heterostructure delivering superior pseudocapacitive sodium storage via bottom-up monomicelle assembly10.1021/jacs.9b06962 ↗
89. Confined interfacial monomicelle assembly for precisely controlled coating of single-layered titania mesopores10.1016/j.matt.2019.03.003 ↗
90. TiO2 nanostructures as anode materials for Li/Na‐ion batteries10.1002/tcr.201700103 ↗
91. Preparation of MoS2/TiO2 based nanocomposites for photocatalysis and rechargeable batteries: progress, challenges, and perspective10.1039/C7NR07366F ↗
92. Ti-based compounds as anode materials for Li-ion batteries10.1039/c2ee03410g ↗
93. Silicon based lithium-ion battery anodes: A chronicle perspective review10.1016/j.nanoen.2016.11.013 ↗
94. Before Li ion batteries10.1021/acs.chemrev.8b00422 ↗
95. The structure of TiO2 II, a high-pressure phase of TiO210.1107/S0365110X67002713 ↗
96. Lattice dynamics of rutile10.1103/PhysRevB.3.3457 ↗
97. Anatase as a cathode material in lithium-organic electrolyte rechargable batteries10.1016/0378-7753(81)80031-6 ↗
98. Ternary LixTiO2 phases from insertion reactions10.1016/0167-2738(83)90268-0 ↗
99. The crystal-structures of the lithium-inserted metal-oxides Li0.5TiO2 anatase, LiTi2O4 spinel, and Li2Ti2O410.1016/0022-4596(84)90228-7 ↗
100. Electrochemistry of anatase titanium-dioxide in lithium nonaqueous cells10.1016/0378-7753(85)88026-5 ↗