Morphology Engineering Enables Structural Stability and Kinetics of O3-Na0.87Fe0.5Mn0.5O2 Cathode Material for Sodium-Ion Batteries
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Chen, Z., Deng, Y., Kong, J., et al. Toward the high-voltage stability of layered oxide cathodes for sodium-ion batteries: challenges, progress, and perspectives. Adv. Mater. 36(26), 2402008 (2024)10.1002/adma.202402008 ↗
2. Song, T., Kendrick, E. Recent progress on strategies to improve the high-voltage stability of layered-oxide cathode materials for sodium-ion batteries. J. Phys. Mater. 4(3), 032004 (2021)
3. Huang, Q., Wang, M., Zhang, L., et al.: Shear-resistant interface of layered oxide cathodes for sodium ion batteries. Energy Storage Mater. 45, 389–398 (2022)10.1016/j.ensm.2021.11.041 ↗
4. Hwang, J.-Y., Myung, S.-T., Aurbach, D., et al.: Effect of nickel and iron on structural and electrochemical properties of O3 type layer cathode materials for sodium-ion batteries. J. Power Sources. 324, 106–112 (2016)10.1016/j.jpowsour.2016.05.064 ↗
5. Hwang, J.-Y., Myung, S.-T., Sun, Y.-K. Sodium-ion batteries: present and future. Chem. Soc. Rev. 46(12), 3529–3614 (2017)10.1039/C6CS00776G ↗
6. Gao, Y., Zhang, H., Peng, J., et al.: A 30-year overview of sodium-ion batteries. Carbon Energy 6(6), e464 (2024)10.1002/cey2.464 ↗
7. Rostami, H., Valio, J., Suominen, P., et al.: Advancements in cathode technology, recycling strategies, and market dynamics: A comprehensive review of sodium ion batteries. Chem. Eng. J. 495, 153471 (2024)10.1016/j.cej.2024.153471 ↗
8. He, M., Liu, S., Wu, J., et al.: Review of cathode materials for sodium-ion batteries. Prog Solid State Chem. 74, 100452 (2024)10.1016/j.progsolidstchem.2024.100452 ↗
9. Wu, Y., Shuang, W., Wang, Y., et al.: Recent progress in sodium-ion batteries: advanced materials, reaction mechanisms and energy applications. Electrochem. Energy Rev. 7(1), 17 (2024)10.1007/s41918-024-00215-y ↗
10. Wang, J., Zhu, Y.-F., Su, Y., et al.: Routes to high-performance layered oxide cathodes for sodium-ion batteries. Chem. Soc. Rev. 53(8), 4230–4301 (2024)10.1039/D3CS00929G ↗
11. Zheng, Y.-M., Huang, X.-B., Meng, X.-M., et al.: Copper and zirconium codoped O3-type sodium iron and manganese oxide as the cobalt/nickel-free high-capacity and air-stable cathode for sodium-ion batteries. ACS Appl. Mater. Interfaces. 13(38), 45528–45537 (2021)10.1021/acsami.1c12684 ↗
12. Yu, Y., Ning, D., Li, Q., et al.: Revealing the anionic redox chemistry in O3-type layered oxide cathode for sodium-ion batteries. Energy Storage Mater. 38, 130–140 (2021)10.1016/j.ensm.2021.03.004 ↗
13. Ma, X., Yang, C., Xu, Z., et al.: Structural and electrochemical progress of O3-type layered oxide cathodes for Na-ion batteries. Nanoscale. 15(36), 14737–14753 (2023)10.1039/D3NR02373G ↗
14. Liang, X., Hwang, J.Y., Sun, Y.K.: Practical cathodes for sodium-ion batteries: who will take the crown. Adv. Energy Mater. 13(37), 2301975 (2023)10.1002/aenm.202301975 ↗
15. Liu, Y., Wang, D., Li, H., et al.: Research progress in O3-type phase Fe/Mn/Cu-based layered cathode materials for sodium ion batteries. J. Mater. Chem. A. 10(8), 3869–3888 (2022)10.1039/D1TA10329F ↗
16. Yu, C., Wu, F., Qian, M., et al.: Core-shell engineering of titanium-based anodes toward enhanced electrochemical lithium/sodium storage performance: a review. Mater. Today Energy. 43, 101589 (2024)10.1016/j.mtener.2024.101589 ↗
17. Shi, Q., Qi, R., Feng, X., et al.: Niobium-doped layered cathode material for high-power and low-temperature sodium-ion batteries. Nat. Commun. 13(1), 3205 (2022)10.1038/s41467-022-30942-z ↗
18. Wang, D., Cai, P., Zou, G.-Q., et al.: Ultra-stable carbon-coated sodium vanadium phosphate as cathode material for sodium-ion battery. Rare Met. 41(1), 115–124 (2022)10.1007/s12598-021-01743-y ↗
19. Wen, X., Yuan, H., Liu, Y., et al.: Topography control and component design strategies to enhance electrochemical performance of O3-Type cathode materials for Sodium-ion batteries. J. Power Sources. 623, 235406 (2024)10.1016/j.jpowsour.2024.235406 ↗
20. Li, R., Qin, X., Li, X., et al.: High-Entropy and Multiphase Cathode Materials for Sodium-Ion Batteries. Adv. Energy Mater. 14(26), 2400127 (2024)10.1002/aenm.202400127 ↗
21. Liu, W., Liang, Y., Wu, H., et al.: Enhancing Electrochemical Properties of O3-Type NaNi1/3Fe1/3Mn1/3O2 Cathode Material For Sodium-Ion Batteries Through Regulating the Precursor’S Growth Environment. SSRN 5168695
22. Li, Z., Xiong, J., Zeng, W., et al.: Revealing the effect of morphology engineering in boosting the structural stability of P2-Na2/3Ni1/3Mn2/3O2 cathodes for sodium-ion batteries. Mater. Today Energy. 48, 101775 (2025)10.1016/j.mtener.2024.101775 ↗
23. Nicolas, B., Steffen, H., Arun, N., et al.: Layered NaxMnO2+z in Sodium Ion Batteries-Influence of Morphology on Cycle Performance. ACS Appl. Mater. Interfaces. 11, 8059–8065 (2014)
24. Huang, C.-Y., Babu, S.K., Liu, W.-R.: Temperature effects on P2 type-Na0.8Cu0.2Fe0.4Mn0.4O2 layer oxide cathode synthesized through a co-precipitation method for Sodium Ion Batteries. Electrochim. Acta 147541 (2025)10.1016/j.electacta.2025.147541 ↗
25. Duan, Y., Ma, Z., Wan, Q., et al.: Optimizing electrochemical performance of Na0.67Ni0.17Co0.17Mn0.66O2 with P2 structure via preparing concentration-gradient particles for sodium-ion batteries. J. Colloid Interface Sci. 662, 69–75 (2024)10.1016/j.jcis.2024.02.046 ↗
26. Patat, Ş., Şahin, A., Taş, Y., et al.: A novel air-stable O3-type layered oxide cathode material with low Ni content for sodium-ion batteries. Int. J. Energy Res. 46(15), 22025–22037 (2022)10.1002/er.8230 ↗
27. Wu, Z., Zhou, Y., Zeng, J., et al.: Investigating the effect of pH on the growth of coprecipitated Ni0.8Co0.1Mn0.1(OH)2 agglomerates as precursors of cathode materials for Li-ion batteries. Ceram. Int. 49(10), 15851–15864 (2023)10.1016/j.ceramint.2023.01.180 ↗
28. Deng, C., Liu, L., Zhou, W., et al.: Effect of synthesis condition on the structure and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 prepared by hydroxide co-precipitation method. Electrochim. Acta. 53(5), 2441–2447 (2008)10.1016/j.electacta.2007.10.025 ↗
29. Li, Q., Lin, B., Zhang, S., et al.: Towards high potential and ultra long-life cathodes for sodium ion batteries: freestanding 3D hybrid foams of Na7V4(P2O7)4(PO4) and Na7V3(P2O7)4@biomass-derived porous carbon. J. Mater. Chem. A. 4(15), 5719–5729 (2016)10.1039/C6TA01465H ↗
30. Yu, T.-Y., Hwang, J.-Y., Aurbach, D., et al.: Microsphere Na0.65[Ni0.17Co0.11Mn0.72]O2 cathode material for high-performance sodium-ion batteries. ACS Appl. Mater. Interfaces. 9(51), 44534–44541 (2017)10.1021/acsami.7b15267 ↗
31. Liu, H., Chen, H., Deng, W., et al.: Orthorhombic Na2/3Cu0.1Mn0.9O2 cathode: Enhanced Na storage performances with the suppressed Mn-O bond anisotropy. Chem. Eng. J. 460, 141744 (2023)10.1016/j.cej.2023.141744 ↗
32. Wang, J.L., Wu, L.R., Zhang, H.X., et al.: Design of Cu-substituted O3-type NaFe0.5Mn0.5O2 cathode materials for sodium-ion batteries. Chem. -Eur J. 29(42), e202301014 (2023)10.1002/chem.202301014 ↗
33. Geng, J., Huang, Y., Guo, Y., et al.: Surface Coordination Modulated Morphological Anisotropic Engineering of Iron-Benzoquinone Frameworks for Lithium-Ion Batteries. Angew Chem. 136(30), e202405066 (2024)10.1002/ange.202405066 ↗
34. Park, S., Kim, J., Yi, S.H., et al.: Coprecipitation temperature effects of morphology-controlled nickel hexacyanoferrate on the electrochemical performance in aqueous sodium-ion batteries. ChemSusChem. 14(4), 1082–1093 (2021)10.1002/cssc.202002339 ↗
35. Sun, T., Meng, J., Wang, F., et al.: The effect of heating rate on microstructure and electrochemical performance of nickel-rich layered oxides cathode materials. Electrochim. Acta. 507, 145140 (2024)10.1016/j.electacta.2024.145140 ↗
36. Huang, B., Cheng, L., Li, X., et al.: Layered cathode materials: precursors, synthesis, microstructure, electrochemical properties, and battery performance. Small. 18(20), 2107697 (2022)10.1002/smll.202107697 ↗
37. Li, F., Sun, Z., Dong, M., et al.: Regulating the exposed crystal facets of electrode materials for Na-ion batteries: A review of recent advancements and future perspectives. Chem. Eng. J. 480, 147940 (2024)10.1016/j.cej.2023.147940 ↗
38. Wang, P.F., You, Y., Yin, Y.X., et al.: Layered oxide cathodes for sodium-ion batteries: phase transition, air stability, and performance. Adv. Energy Mater. 8(8), 1701912 (2018)10.1002/aenm.201701912 ↗
39. Xu, J., Han, Z., Jiang, K., et al.: Suppressing cation migration and reducing particle cracks in a layered Fe-based cathode for advanced sodium-ion batteries. Small. 16(3), 1904388 (2020)10.1002/smll.201904388 ↗
40. Ma, X., Chen, H., Ceder, G.: Electrochemical properties of monoclinic NaMnO2. J. Electrochem. Soc. 158(12), A1307–A1312 (2011)10.1149/2.035112jes ↗
41. Komaba, S., Takei, C., Nakayama, T., et al.: Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO2. Electrochem. Commun. 12(3), 355–358 (2010)10.1016/j.elecom.2009.12.033 ↗
42. Cao, M.-H., Wang, Y., Shadike, Z., et al.: Suppressing the chromium disproportionation reaction in O3-type layered cathode materials for high capacity sodium-ion batteries. J. Mater. Chem. A. 5(11), 5442–5448 (2017)10.1039/C6TA10818K ↗
43. Deng, H., Yang, Y., Liu, L., et al.: Improving the crystal stability of O3-type metal oxide cathode materials by Cu substitution for Na-ion batteries. Energy Fuels. 38(10), 9066–9071 (2024)10.1021/acs.energyfuels.4c00250 ↗
44. Wang, Q., Mariyappan, S., Vergnet, J., et al.: Reaching the energy density limit of layered O3-NaNi0.5Mn0.5O2 electrodes via dual Cu and Ti substitution. Adv. Energy Mater. 9(36), 1901785 (2019)10.1002/aenm.201901785 ↗
45. Shen, Q., Zhao, X., Liu, Y., et al.: Dual-strategy of cation-doping and nanoengineering enables fast and stable sodium-ion storage in a novel Fe/Mn-based layered oxide cathode. Adv. Sci. 7(21), 2002199 (2020)10.1002/advs.202002199 ↗
46. Zhou, D., Huang, W., Zhao, F., et al.: The effect of Na content on the electrochemical performance of the O3-type NaxFe0.5Mn0.5O2 for sodium-ion batteries. J. Mater. Sci. 54(9), 7156–7164 (2019)10.1007/s10853-018-03277-8 ↗
47. Talaie, E., Duffort, V., Smith, H.L., et al.: Structure of the high voltage phase of layered P2-Na2/3–z[Mn1/2Fe1/2]O2 and the positive effect of Ni substitution on its stability. Energy Environ. Sci. 8(8), 2512–2523 (2015)10.1039/C5EE01365H ↗
48. Bhide, A., Hofmann, J., Dürr, A.K., et al.: Electrochemical stability of non-aqueous electrolytes for sodium-ion batteries and their compatibility with Na0.7CoO2. Phys. Chem. Chem. Phys. 16(5), 1987–1998 (2014)10.1039/C3CP53077A ↗
49. Zhang, L., Huang, J., Song, M., et al.: Single-crystal growth of P2-type layered oxides with increased exposure of {010} planes for high-performance sodium-ion batteries. ACS Appl. Mater. Interfaces. 15(40), 47037–47048 (2023)10.1021/acsami.3c10312 ↗
50. Sun, Z., Zhang, J., Zhang, J., et al.: Synergistic Structural and Defect Engineering in MoS2 Featuring Ultra-Expanded Interlayers for Fast-Chargeable and Long-Durable Sodium-Ion Batteries. Adv. Mater. e17606 (2025)10.1002/adma.202517606 ↗