journal article·2014-01

Solid state dye-sensitized solar cells based on polymeric ionic liquid with free imidazolium cation

Thanh-Tuan Bui, Tarik Matrab, Vincent Woehling, Justine Longuet, Cédric Plesse, Giao T. M. Nguyen, Frédéric Vidal, Fabrice Goubard

Electronic Materials Letters· Volume 10· Issue 1
Publisher page

Abstract

A polymeric ionic liquid issued from an ionic liquid monomer composed of a methacrylate polymerizable group, a polar tri(ethylene oxide) spacer, a trifluoromethane sulfonic anion and a free imidazolium cation was employed as a solid electrolyte for dye-sensitized solar cells. The simple device configuration based on dip-coated nanoporous TiO2 electrode sensitized by N3 ruthenium-based dye gave the conversion efficiency of up to 1.74% under AM 1.5 simulated solar light illumination. Effect of TiO2 porous film thickness on overall energy conversion efficiency was discussed. It has been found that the most appropriate thickness for the polymeric ionic liquid based electrolyte dye sensitized solar cell is around 7 µm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced Nanomaterials in Catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. B. O’Regan and M. Gratzel, Nature 353, 737 (1991).10.1038/353737a0 ↗
2. A. Hagfeldt, G. Boschloo, L. Sun, L. Kloo, and H. Pettersson, Chem. Rev. 110, 6595 (2010).10.1021/cr900356p ↗
3. J. N. Clifford, E. Martınez-Ferrero, A. Viterisi, and E. Palomares, Chem. Soc. Rev. 40, 1635 (2011).10.1039/B920664G ↗
4. A. Mishra, Markus, K. R. Fischer, and P. Bäuerle, Angew. Chem. Int. Ed. 48, 2474 (2009).10.1002/anie.200804709 ↗
5. G. C. Vougioukalakis, A. I. Philippopoulos, T. Stergiopoulos, and P. Falaras, Coord. Chem. Rev. 255, 2602 (2011).10.1016/j.ccr.2010.11.006 ↗
6. Q. Zhang and G. Cao, Nano Today 6, 91 (2011).10.1016/j.nantod.2010.12.007 ↗
7. H. Tian and L. Sun, J. Mater. Chem. 21, 10592 (2011).10.1039/c1jm10598a ↗
8. T. W. Hamann and J. W. Ondersma, Energy Environ. Sci. 4, 370 (2011).10.1039/C0EE00251H ↗
9. G. Boschloo and A. Hagfeldt, Acc. Chem. Res. 42, 1819 (2009).10.1021/ar900138m ↗
10. Y. Chiba, A. Islam, Y. Watanabe, R. Komiya, N. Koide, and L. Han, Jpn. J. Appl. Phys. 45, L638 (2006).10.1143/JJAP.45.L638 ↗
11. A. Yella, H.-W. Lee, H. N. Tsao, C. Yi, A. K. Chandiran, M. K. Nazeeruddin, E. W.-G. Diau, C.-Y. Yeh, S. M. Zakeeruddin, and M. Grätzel, Science 334, 629 (2011).10.1126/science.1209688 ↗
12. S. M. Zakeeruddin and M. Grätzel, Adv. Funct. Mater. 19, 2187 (2009).10.1002/adfm.200900390 ↗
13. I. Chung, B. Lee, J. He, R. P. H. Chang, and M. G. Kanatzidis, Nature 485, 486 (2012).10.1038/nature11067 ↗
14. U. Bach, D. Lupo, P. Comte, J. E. Moser, F. Weissortel, J. Salbeck, H. Spreitzer, and M. Gratzel, Nature 395, 583 (1998).10.1038/26936 ↗
15. R. Aich, F. Tran-Van, F. Goubard, L. Beouch, A. Michaleviciute, J. V. Grazulevicius, B. Ratier, and C. Chevrot, Thin Solid Films 516, 7260 (2008).10.1016/j.tsf.2007.12.125 ↗
16. M. Gorlov and L. Kloo, Dalton Trans., Vol. 0, 2655 (2008).10.1039/b716419j ↗
17. W. S. Chi, J. K. Koh, S. H. Ahn, J.-S. Shin, H. Ahn, D. Y. Ryu, and J. H. Kim, Electrochem. Commun. 13, 1349 (2011).10.1016/j.elecom.2011.08.005 ↗
18. G. Wang, L. Wang, S. Zhuo, S. Fang, and Y. Lin, Chem. Commun. 47, 2700 (2011).10.1039/c0cc04948d ↗
19. J. Juger, F. Meyer, F. Vidal, C. Chevrot, and D. Teyssié, Tetrahedron Lett. 50, 128 (2009).10.1016/j.tetlet.2008.10.096 ↗
20. H. Randriamahazaka, C. Plesse, D. Teyssié, and C. Chevrot, Electrochem. Commun. 6, 299 (2004).10.1016/j.elecom.2004.01.002 ↗
21. P. Balraju, P. Suresh, M. Kumar, M. S. Roy, and G. D. Sharma, J. Photochem. Photobiol., A 206, 53 (2009).10.1016/j.jphotochem.2009.05.014 ↗
22. V. Baglio, M. Girolamo, V. Antonucci, and A. S. Aricò, Int. J. Electrochem. Sci. 6, 3375 (2011).10.1016/S1452-3981(23)18258-7 ↗