Dielectric Barrier, Etch Stop, and Metal Capping Materials for State of the Art and beyond Metal Interconnects

Over the past decade, the primary focus for improving the performance of nano-electronic metal interconnect structures has been to reduce the impact of resistance-capacitance (RC) delays via utilizing insulating dielectrics with ever lower values of dielectric permittivity. The integration and implementation of such low dielectric constant (i.e. low-k) materials has been fraught with numerous challenges. For intermetal and interlayer (ILD) low-k dielectrics, these challenges have been largely associated to integration with metal interconnect fabrication processes and well documented and reviewed in the literature. Although equally important, less attention has been given to other low-k dielectrics utilized in metal interconnect structures that are commonly referred to as low-k dielectric barriers (DB), etch stops (ES), and/or Cu capping layers (CCL). These materials present numerous challenges as well for integration into metal interconnect fabrication processes. However, they also have more stringent integrated functionality requirements relative to low-k ILD materials that serve only a basic purpose of electrically isolating adjacent metal lines. In this article, we review the integration challenges and associated integrated functionality requirements for low-k DB/ES/CCL materials with a focus on the current status and future direction needed for these materials to facilitate both Moore's law (i.e. More Moore) and More than Moore scaling.