Bending Characteristics of Laminated Wood Composites Made of Poplar Wood and GFRP
Source abstract
Abstract
In this study, 4 layers of 5 mm thick slats obtained by sawing method from poplar wood were used. Plain woven GRFP with low density and grammage of 100 g/m2 (Type 1) and plain woven GRFP with high density and grammage of 200 g/m2 (Type 2) were placed and glued between each layer. Polyvinyl acetate (PVAc-D4), Polyurethane (PU) and dual-component Epoxy (L285-resin and H285-hardener) adhesives were used for gluing the layers. Strength values (bending and modulus of elasticity) between the obtained layers were investigated. As a result of the study, it was determined that epoxy glue has higher strength than polyurethane and polyvinyl acetate glues; Type 2 plain woven fabric has higher strength than Type 1 plain woven fabric; and parallel load to the glue line results in higher performance than perpendicular load to the glue line.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wood Treatment and Properties · Natural Fiber Reinforced Composites · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Karabuk University, Furniture Design and Decoration Department, Safranbolu Vocational School, Karabük, Turkey
Usak University, Banaz Vocational School, Forestry Department, Usak, Turke
Zonguldak Bulent Ecevit University, Caycuma Vocational School, Interior Design Programme, Zonguldak, Turkey
References
Reference metadata was not supplied for this record.