The structural and electrical properties of polyaniline carbon nanotubes (PANI-CNTs) composite
Source abstract
Abstract
Carbon nanotubes (CNTs) doped polyaniline (PANI) nanocomposite was synthesized by chemical polymerization method in the presence of HCl medium. The structure of the PANI/CNTs composite was confirmed by X-ray diffraction (XRD) technique. The SEM results showed granular and tube like shape for PANI and CNTs respectively. The SEM characterization of PANI-CNTs composite revealed a uniform wrapping of CNTs by PANI forming a core-shell nanostructure. The temperature dependent dielectric measurements were performed in the frequency range of 0.1 kHz-1 MHz. Dielectric measurements revealed the strong interactions between PANI and CNT nanoparticles causing a beneficial effect on stability of the composites. The dielectric constant followed the Maxwell-Wagner interfacial polarization. The frequency dependent conductivity obeyed a power law of frequency. Temperature has an effect on dielectric constant values of composite sample. Heat treatment affected the dipole polarization by reducing the relaxation time and hence contributed to the enhancement of dielectric parameters. Dielectric properties of composites were found to be improved due to addition of carbon nanotubes, which can improve the formation of a more efficient network for charge transport mechanism in the base polyaniline matrix. The border between polyaniline and CNTs can play an important role in yielding a large dielectric constant in the nanocomposites.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. [1] A.O.Patil, A.J. Heeger, F. Wudl, Rev.88,183 (1988). https://doi.org/10.1021/cr00083a00910.1021/cr00083a009 ↗
2. [2] F. Kajzar, G. L. Baker, J. Massier, Synth. Met.17, 563, (1987). https://doi.org/10.1016/0379-6779(87)90799-510.1016/0379-6779(87)90799-5 ↗
3. [3] T. A. Skotheim, Handbook of Conducting Polymers, Marcel Dekker, New York, (1986).
4. [4] A. J. Breeze, Z. Schlesinger, S. A. Carter, H. Tillmsnn, Sol.Ener.Mater.and Sol. Cells 83, 263(2004). https://doi.org/10.1016/j.solmat.2004.02.02910.1016/j.solmat.2004.02.029 ↗
5. [5] S. A. Carter, M. Angelopoulos, S. Karg, P. J. Brock, J. C. Scott, Appl. Phys. Lett.70, 2067 (1997). https://doi.org/10.1063/1.11895310.1063/1.118953 ↗
6. [6] X.M. Sui, C.L. Shao, Y.C. Liu, Appl. Phys. Lett. 87, 113 (2005). https://doi.org/10.1063/1.204880810.1063/1.2048808 ↗
7. [7] N.A. Niaz, A. Shakoor, Fayyaz Hussain, N. R. Khalid, M.K. Saleem, N. Anwar, J. Ahmad, J. of Ovonic Research, 18, 713 (2022) https://doi.org/10.15251/JOR.2022.185.71310.15251/JOR.2022.185.713 ↗
8. [8] D.C. Olson, J. Piris, R.T. Colins, S.E. Shaheen, D.S. Ginley, Thin Solid Films 26, 496 (2006). https://doi.org/10.1016/j.tsf.2005.08.17910.1016/j.tsf.2005.08.179 ↗
9. [9] M. Rosoff, Ed., Nano-Surface Chemistry, Marcel Dekker, New York, 505 (2002). https://doi.org/10.1201/978020390848810.1201/9780203908488 ↗
10. [10] R. Gangopadhyay, A. De, Chem. Mater. 12,608 (2000). https://doi.org/10.1021/cm990537f10.1021/cm990537f ↗
11. [11] S.H. Jang, M.G. Han, S.S. Im, Synth. Met.17,110(2000). https://doi.org/10.1016/S0379-6779(99)00176-910.1016/S0379-6779(99)00176-9 ↗
12. [12] C. Downs, J. Nugent, P. M. Ajayan, D. J.Duquette, K. S. Santhanam, Adv. Mater. 11, 1028 (1999). https://doi.org/10.1002/(SICI)1521-4095(199908)11:12<1028::AID-ADMA1028>3.0.CO;2-N10.1002/(SICI)1521-4095(199908)11:12<1028::AID-ADMA1028>3.0.CO;2-N ↗
13. [13] G. Chakrabotry, K. Gupta, D.Rana, A, Kumar Meikap, Adv. Nat. Sci: Nanoscience Technology 3,035015 (2012). https://doi.org/10.1088/2043-6262/3/3/03501510.1088/2043-6262/3/3/035015 ↗
14. [14] I. A. Tchmutin, A. T. Ponomarenko, E. P. Krinichnaya, G. I. Kozub, O. N.Efinov, Carbon 41, 1391 (2003). https://doi.org/10.1016/S0008-6223(03)00067-810.1016/S0008-6223(03)00067-8 ↗
15. [15] M. Baibarac, I. Batlog, S. Lefrant, J. Y. Mavellec, O. Chauvet, Chem. Mater. 15, 41 (2003). https://doi.org/10.1021/cm021287x10.1021/cm021287x ↗
16. [16] X. Bi, Z. J. Han, Y. Yang, B. K. Tay, J. Phys. Chem. C 111, 4125(2007). https://doi.org/10.1021/jp065184410.1021/jp0651844 ↗
17. [17] M. R. Karim, C. J. Lee, Y. Y. Park, M. S. Lee, Synth. Met.151, 131(2005). https://doi.org/10.1016/j.synthmet.2005.03.01210.1016/j.synthmet.2005.03.012 ↗
18. [18] L. Patterson, American Physical Society56,978 (1939). https://doi.org/10.1103/PhysRev.56.97810.1103/PhysRev.56.978 ↗
19. [19] L.Xueyan, D.Wang, G.Cheng, Q. Luo, A. Jing, Y. Wang, A facile method to prepare mesoporousanatase TiO2 materials in water at lower temperatures, 81, 267 (2008).
20. [20] W. L. Bragg,Cambridge Phil. Soc. Crystallography and Physics17,43 (1914).
21. [21] R. Murugesan and E. Subramanian, Mat. Chem. and Phys. 77,860 (2002). https://doi.org/10.1016/S0254-0584(02)00158-X10.1016/S0254-0584(02)00158-X ↗
22. [22] G.C.Psarras,Composites Part A37,1545(2006). https://doi.org/10.1016/j.compositesa.2005.11.00410.1016/j.compositesa.2005.11.004 ↗
23. [23] L.Wang, Z.M. Dang, Applied Physics Letters 87, 1(2005). https://doi.org/10.1063/1.195488010.1063/1.1954880 ↗
24. [24] J. C. Maxwell, Electricity and Magnetism (Clarendon, Oxford, 1892).
25. [25] N.J Pinto, G.P Sinha, F.M Aliev. Synthetic Metals 94, 199 (1998). https://doi.org/10.1016/S0379-6779(98)00003-410.1016/S0379-6779(98)00003-4 ↗
26. [26] K.K. patankar, P.D. Dombale, V.L. Mathe, S.A. Patil, R.N. Patil, Mater. Sci. Eng. 8, 53 (2001). https://doi.org/10.1016/S0921-5107(01)00695-X10.1016/S0921-5107(01)00695-X ↗
27. [27] M. Idrees, M. Nadeem, M. Atif, M. Siddique, M. Mehmood, M.M. Hassan, ActaMaterialia 59,1338 (2011). https://doi.org/10.1016/j.actamat.2010.10.06610.1016/j.actamat.2010.10.066 ↗
28. [28] B. Vishwanathan, V.R. K. Murthy, Ferrite Materials, 3rd edition p7.
29. [29] K. W. Wagner, Arch Elektrotech2,371 (1914). https://doi.org/10.1007/BF0165732210.1007/BF01657322 ↗
30. [30] K.W.Wagner, Annals of Physics 40,817 (2013).10.1118/1.4790467 ↗
31. [31] Y.Song, T.W.Noh, S.I.Lee, J.R.Gaines, Phys. Rev. 33(2), 904 (1988). https://doi.org/10.1103/PhysRevB.33.90410.1103/PhysRevB.33.904 ↗
32. [32] M. Chunying, X. Shen, Z. Shi, L. Chen, Z. Xu, Poly.-Plastics Tech. and Eng.49, 1172 (2010). https://doi.org/10.1080/03602559.2010.49640510.1080/03602559.2010.496405 ↗
33. [33] A. Shakoor, N.A. Niaz, W Khan, G Asghar, N.R. Khalid, MN Rehman, T Bashir, N Anwer, Tz Rizvi, Dijest Journal of Nano and Bio Structure, 11, 1145 (2016)
34. [34] T. Wu, H. L. Chang Y. W. Lin, Poly. Inter.58,1065 (2009). https://doi.org/10.1002/pi.263410.1002/pi.2634 ↗
35. [35] I. N. Daniels, Z. Wang, B. B. Laird, J. Phys. Chem. C121,1025(2017). https://doi.org/10.1021/acs.jpcc.6b1089610.1021/acs.jpcc.6b10896 ↗
36. [36] P. Q. Mantas,Journal of the European Ceramic Society 19, 2079 (1999). https://doi.org/10.1016/S0955-2219(98)00273-810.1016/S0955-2219(98)00273-8 ↗
37. [34] T. Wu, H. L. Chang Y. W. Lin, Poly. Inter.58,1065 (2009).10.1002/pi.2634 ↗
38. [35] I. N. Daniels, Z. Wang, B. B. Laird, J. Phys. Chem. C121,1025(2017).10.1021/acs.jpcc.6b10896 ↗
39. [36] P. Q. Mantas,Journal of the European Ceramic Society 19, 2079 (1999).10.1016/S0955-2219(98)00273-8 ↗