DataVXDigest Journal of Nanomaterials and BiostructuresPaper
journal article·2023-12-20Open access

Effect of NiFe2O4 contents on the structural, optical and electrical properties of PEO/CMC-NiFe2O4 nanocomposite

University of Jeddah, College of Science, Department of Physical Sciences, Jeddah, Saudi Arabia, L. H. Gaabour, S. K. Alghamdi, Physics Department, Faculty of Sciences, Taibah University, Saudi Arabia

Digest Journal of Nanomaterials and Biostructures· Volume 18· Issue 4
Publisher pageOpen full text
Source abstract

Abstract

In this study the casting method was used to prepare new polymeric nanocomposites by filling a polymer blend based on polyethylene oxide (PEO) and carboxymethyl cellulose (CMC) by adding different calculated weight ratios of nickel ferrite nanoparticles (NiFe2O4) which were prepared by solvothermal technique. The XRD and ATR-FTIR measurements confirmed the formation of NiFe2O4 NPs, and the transmission electron microscope (TEM) showed that NiFe2O4 NPs have a semispherical shape. The ATR-FTIR and XRD affirmed the miscibility and complexation between a pure blend of PEO/CMC and PEO/CMCNiFe2O4 nanocomposites. Significant structural, optical, and morphological changes were seen in PEO/CMC/NiFe2O4 nanocomposites. These changes, in turn, caused a shift in the absorption edge toward a lower wavelength, which resulted in a drop in the energy gap value. The AC electrical conductivity (σac), dielectric constant (ε′), dielectric loss (ε"), and the dielectric moduli (M' and M").
Source: crossref · Quality: baseline

Research context

PolymersNanomaterials

OpenAlex topics: Polymer Nanocomposite Synthesis and Irradiation · Electromagnetic wave absorption materials · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. [1] Li, J., Zivanovic, S., Davidson, P. A., Kit, K. Carbohydrate Polymers, 79(3), 786-791. (2010); https://doi.org/10.1016/j.carbpol.2009.09.02810.1016/j.carbpol.2009.09.028 ↗
2. [2] Morsi, M. A., Abdelghany, A. M., Materials Chemistry and Physics, 201, 100-112. (2017); https://doi.org/10.1016/j.matchemphys.2017.08.02210.1016/j.matchemphys.2017.08.022 ↗
3. [3] Choudhary, S. Structural, Journal of Physics and Chemistry of Solids, 121, 196-209. (2018); https://doi.org/10.1016/j.jpcs.2018.05.01710.1016/j.jpcs.2018.05.017 ↗
4. [4] Sahraeian, R., Davachi, S. M., Heidari, B. S., Composites Part B: Engineering, 162, 103-111. (2019); https://doi.org/10.1016/j.compositesb.2018.10.09310.1016/j.compositesb.2018.10.093 ↗
5. [5] Cha, J., Kim, J., Ryu, S., Hong, S. H., Composites Part B: Engineering, 162, 283-288. (2019); https://doi.org/10.1016/j.compositesb.2018.11.01110.1016/j.compositesb.2018.11.011 ↗
6. [6] Čech Barabaszová, K., Holešová, S., Bílý, M., Hundáková Journal of Inorganic and Organometallic Polymers and Materials, 30(10), 4218-4227. (2020); https://doi.org/10.1007/s10904-020-01573-y10.1007/s10904-020-01573-y ↗
7. [7] Jia, F., Liu, H. J., Zhang, G. G., Procedia Environmental Sciences, 31, 98-102. (2016); https://doi.org/10.1016/j.proenv.2016.02.01310.1016/j.proenv.2016.02.013 ↗
8. [8] Gupta, B., Agarwal, R., Sarwar Alam, M., Journal of applied polymer science, 127(2), 1301- 1308. (2013); https://doi.org/10.1002/app.3766510.1002/app.37665 ↗
9. [9] Rajeh, A., Morsi, M. A., Elashmawi, I. S., Vacuum, 159, 430-440. (2019); https://doi.org/10.1016/j.vacuum.2018.10.06610.1016/j.vacuum.2018.10.066 ↗
10. [10] Tongdeesoontorn, W., Mauer, L. J., Wongruong, S., Sriburi, P., Rachtanapun, P., Chemistry Central Journal, 5(1), 1-8. (2011); https://doi.org/10.1186/1752-153X-5-610.1186/1752-153X-5-6 ↗
11. [11] Abdelghany, A. M., Abdelrazek, E. M., Badr, S. I., Morsi, M. A., Materials & Design, 97, 532-543. (2016); https://doi.org/10.1016/j.matdes.2016.02.08210.1016/j.matdes.2016.02.082 ↗
12. [12] Hassen, A. M. E. S., El Sayed, A. M., Morsi, W. M., El-Sayed, S., Journal of Applied Physics, 112(9), 093525. (2012); https://doi.org/10.1063/1.476486410.1063/1.4764864 ↗
13. [13] Naidu, T. M., Narayana, P. L., Journal of Nanoscience and Technology, 769-772. (2019); https://doi.org/10.30799/jnst.247.1905040710.30799/jnst.247.19050407 ↗
14. [14] Joshi, S., Kumar, M., Chhoker, S., Srivastava, G., Jewariya, M., Singh, V. N., Journal of Molecular structure, 1076, 55-62. (2014); https://doi.org/10.1016/j.molstruc.2014.07.04810.1016/j.molstruc.2014.07.048 ↗
15. [15] Yan, J., Huang, Y., Chen, X., Wei, C., Synthetic Metals, 221, 291-298. (2016); https://doi.org/10.1016/j.synthmet.2016.09.01810.1016/j.synthmet.2016.09.018 ↗
16. [16] Sim, L. H., Gan, S. N., Chan, C. H., & Yahya, R. J. S. A. P. A. M., Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 76(3-4), 287-292. (2010); https://doi.org/10.1016/j.saa.2009.09.03110.1016/j.saa.2009.09.031 ↗
17. [17] Abdelrazek, E. M., Abdelghany, A. M., Badr, S. I., Morsi, M. A., Research Journal of Pharmaceutical. Biol. Chem. Sci, 7, 1877-1890. (2016).
18. [18] Abd El-kader, F. H., Hakeem, N. A., Hafez, R. S., Ismail, A. M., Journal of Inorganic and Organometallic Polymers and Materials, 28(3), 1037-1048. (2018); https://doi.org/10.1007/s10904-017-0763-x10.1007/s10904-017-0763-x ↗
19. [19] Vitamin, P., Malaysian Journal of Analytical Sciences, 19(1), 275-283. (2015).
20. [20] Rozali, M. L. H., Ahmad, N. H., Isa, M. I. N., American-Eurasian Journal of Sustainable Agriculture. (2015).
21. [21] Mondal, M. I. H., Yeasmin, M. S., Rahman, M. S., International Journal of Biological Macromolecules, 79, 144-150. (2015); https://doi.org/10.1016/j.ijbiomac.2015.04.06110.1016/j.ijbiomac.2015.04.061 ↗
22. [22] Asiri, S., Sertkol, M., Güngüneş, H., Amir, M., Manikandan, A., Ercan, İ., Baykal, A., Journal of Inorganic and Organometallic Polymers and Materials, 28(4), 1587-1597. (2018); https://doi.org/10.1007/s10904-018-0813-z10.1007/s10904-018-0813-z ↗
23. [23] Elashmawi, I. S., Ismail, A. M., Polymer Bulletin, 1-20. (2022); https://doi.org/10.1007/s00289-022-04139-910.1007/s00289-022-04139-9 ↗
24. [24] Patterson, A., The Physical Review, 56(10), 978-982. (1939); https://doi.org/10.1103/PhysRev.56.97810.1103/PhysRev.56.978 ↗
25. [25] Abd El-kader, F. H., Hakeem, N. A., Hafez, R. S., Ismail, A. M., Journal of Inorganic and Organometallic Polymers and Materials, 28(3), 1037-1048. (2018); https://doi.org/10.1007/s10904-017-0763-x10.1007/s10904-017-0763-x ↗
26. [26] Guo, X., Chen, N., Meng, X., Wang, X., Li, Y., Xie, Q., IOP Publishing. (2019, November); https://doi.org/10.1088/1757-899X/678/1/01211510.1088/1757-899X/678/1/012115 ↗
27. [27] Tarabiah, A. E., Alhadlaq, H. A., Alaizeri, Z. M., Ahmed, A. A., Asnag, G. M., Ahamed, M., Journal of Polymer Research, 29(5), 1-16. (2022); https://doi.org/10.1007/s10965-022-03011-810.1007/s10965-022-03011-8 ↗
28. [28] Morsi, M. A., Abdelaziz, M., Oraby, A. H., Mokhles, I., Journal of Materials Science: Materials in Electronics, 29(18), 15912-15925. (2018); https://doi.org/10.1007/s10854-018-9677- 910.1007/s10854-018-9677-9 ↗
29. [29] Elashmawi, I. S., Hakeem, N. A., Polymer Engineering & Science, 48(5), 895-901. (2008); https://doi.org/10.1002/pen.2103210.1002/pen.21032 ↗
30. [30] Choudhury, B., Dey, M., Choudhury, A., International Nano Letters, 3(1), 1-8. (2013); https://doi.org/10.1186/2228-5326-3-2510.1186/2228-5326-3-25 ↗
31. [31] Elashmawi, I. S., Al-Muntaser, A. A., Journal of Inorganic and Organometallic Polymers and Materials, 31(6), 2682-2690. (2021); https://doi.org/10.1007/s10904-021-01956-910.1007/s10904-021-01956-9 ↗
32. [32] Baskaran, R., Selvasekarapandian, S., Hirankumar, G., Bhuvaneswari, M. S., Ionics, 10 (1), 129-134. (2004); https://doi.org/10.1007/BF0241032110.1007/BF02410321 ↗
33. [33] Hafez, R. S., Hakeem, N. A., Ward, A. A., Ismail, A. M., Abd El kader, F. H., Journal of Inorganic and Organometallic Polymers and Materials, 30(11), 4468-4480. (2020); https://doi.org/10.1007/s10904-020-01637-z10.1007/s10904-020-01637-z ↗
34. [34] Farea, M. O., Abdelghany, A. M., Oraby, A. H., RSC advances, 10 (62), 37621-37630. (2020); https://doi.org/10.1039/D0RA07601E10.1039/D0RA07601E ↗