journal article·2024-03-26Open access

Effects of Al content on microstructure and corrosion behavior of Zn-Al alloy coatings

Civil Engineering and Hydraulics, Sustainable Development and Environment, University of Biskra, 07000, Algeria, A. Touane, M. Diafi, Civil Engineering and Hydraulics, Sustainable Development and Environment, University of Biskra, 07000, Algeria, S. Benamor, Civil Engineering and Hydraulics, Sustainable Development and Environment, University of Biskra, 07000, Algeria, D. Sahnoune, Scientific and Technical Research Centre in Physicochemical analyses CRAPC.PTAPC.Biskra, 07000, Algeria

Abstract

Alloying Zn with other metals is an alternative method to create advanced alloys with better corrosion properties, in this work the electrodeposition of Zn-Al binary alloy in sulphate-based acidic bath and with different Al2O12S3 content from 0.03 to 0.1M on a treated copper substrates was studied, the structure and microstructure of the coatings were analysed by X-ray diffraction (XRD) and scanning electron microscope (SEM) supported by (EDX) analysis, the microhardness was measured, the corrosion resistance was evaluated by potentiodynamic polarization (Tafel), the effect of Al ions was visible on the structure, (XRD) spectra showed zinc phase (η-phase), and Al phase (α-Al phase) with Al peak intensity increasing along with the increase of Al concentration, the microhardness also enhanced gradually to 252.33 HV, the corrosion current density decreased by almost 13 times and the corrosion resistance was drastically improved at 0.1M Al.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced battery technologies research · Corrosion Behavior and Inhibition · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. [1] Karahan.İ, Effect of Borax Pentahydrate Addition to Acid Bath on the Microstructure and Corrosion Resistance of Zn-Co Coating, 128, (2B), 432, (2014) ; https://doi.org/10.12693/APhysPolA.128.B-43210.12693/APhysPolA.128.B-432 ↗
2. [2] Diafi.M, Aidi.A, Study of Zn-Co alloy coatings modified by nano-TiO2 particles incorporation, 15, (3),621, (2020) ; https://doi.org/10.15251/DJNB.2020.153.62110.15251/DJNB.2020.153.621 ↗
3. [3] N. Loukilz, M. Feki, Review-Zn-Mn Electrodeposition: A Literature Review, 167, (2), 022503, (2020) ; https://doi.org/10.1149/1945-7111/ab616010.1149/1945-7111/ab6160 ↗
4. [4] H.Kazimierczak , P. Ozga , A. Jałowiec , R. Kowalik, Tin-zinc alloy electrodeposition from aqueous citrate baths, 240, 311, (2014) ; https://doi.org/10.1016/j.surfcoat.2013.12.04610.1016/j.surfcoat.2013.12.046 ↗
5. [5] Martínez-Flores Elizabeth, Gabriel Torres-Villaseñor, Hibrid materials based on Zn-Al alloys, 149, (2011) ; https://doi.org/10.5772/1724110.5772/17241 ↗
6. [6] Ghaziof Soroor, Paul A. Kilmartin, Wei Gao, Electrochemical studies of sol-enhanced Zn-NiAl2O3 composite and Zn-Ni alloy coatings, 755, 63, (2015) ; https://doi.org/10.1016/j.jelechem.2015.07.04110.1016/j.jelechem.2015.07.041 ↗
7. [7] S. Benamor, M. Diafi, A. Touane, D. Sahnoune, The influence of lead concentration on the properties of the electrodeposited zinc-lead alloy coatings, 18, (4), 1269, (2023) ; https://doi.org/10.15251/DJNB.2023.184.126910.15251/DJNB.2023.184.1269 ↗
8. [8] L. Tahraoui, M. Diafi, A. Fadel, The influence of Chromium concentration on the corrosion resistance of the electrodeposited Zn-Co-Cr alloys, 16, (2), 555 (2021) ; https://doi.org/10.15251/DJNB.2021.162.55510.15251/DJNB.2021.162.555 ↗
9. [9] P. Gogola, Z. Gabalcová, H. Suchánek, M. Babinec, M. Bonek, M. Kusý, Quantitative X-Ray Diffraction Analysis of Zn-Al Based Alloys, 65, (2), 959, (2020) ; https://doi.org/10.24425/amm.2020.13284410.24425/amm.2020.132844 ↗
10. [10] Ali Pasa Hekimog, Temel Savaskan, Structure and mechanical properties of Zn-(5 - 25) Al alloys,105, (11), 1084, (2014) ; https://doi.org/10.3139/146.11111610.3139/146.111116 ↗
11. [11] C.J. Lan, T.S. Chin, P.H. Lin, T.P. Perng, Zn-Al alloy as a new anode-metal of a zinc-air battery, 9, 27, (2006).
12. [12] Zhi-feng Li, Yong-quanHe, Guang-ming Cao, Jun-jian Tang, Xiang-jun Zhang, Zhen_yuLiu, 24, 1032, (2017).
13. [13] Han-Seung Lee, Jitendra Kumar Singh, Mohamed A. Ismail, Chinmoy Bhattacharya, Asiful H. Seikh, Nabeel Alharthi, Raja Rizwan Hussain, Corrosion mechanism and kinetics of Al-Zn coating deposited by arc thermal spraying process in saline solution at prolong exposure periods, 9, (1), 3399, (2019) ; https://doi.org/10.1038/s41598-019-39943-310.1038/s41598-019-39943-3 ↗
14. [14] Sheng-Bo Wang, Qing Ran, Rui-Qi Yao, Hang Shi, Zi Wen, Ming Zhao, Xing-You Lang, Qing Jiang, Lamella-nanostructured eutectic zinc-aluminum alloys as reversible and dendrite-freeanodes for aqueous rechargeable batteries, 11, (1), 1634, (2020) ; https://doi.org/10.1038/s41467-020-15478-410.1038/s41467-020-15478-4 ↗
15. [15] Ahmet Gulec, Ozgur Cevher, Ahmet Turk, Fatih Ustel, Fevzi Yilmaz, Accelerated corrosion behaviors of zn, al and zn/15al coatings on a steel surface,45, (5), 477, (2011).
16. [16] Martin, Alice, Texier-Mandoki, Nathalie, Crusset, Didier, et al, Corrosion Behavior and Sacrificial Properties of Zn and Zn-Al Coatings in Conditions Simulating Deep Geological Disposal of Radioactive Waste at 80° C. Coatings,12, (8), 1044, (2022) ; https://doi.org/10.3390/coatings1208104410.3390/coatings12081044 ↗
17. [17] Chen. S. D, Zhao. J, Preparation of protective Ni-Al coating on low carbon steel by pulsed composite electrodeposition, 8, (1), 678, (2013) ; https://doi.org/10.1016/S1452-3981(23)14050-810.1016/S1452-3981(23)14050-8 ↗