Study the effect of ZnO nanoparticles reinforced sawdust /epoxy composites on mechanical properties
Source abstract
Abstract
In the last few decades, Composites reinforced with natural fibre have generated more interest by researches and engineers due to their law density, high strength, low cost, light weight, recyclability and biodegradability and has gained a special category of green composite. In this work, wood dust reinforced epoxy composites were prepared with 20:80 % filler vol. zinc oxide nanoparticles (ZnONPs) sawdust/epoxy composites were synthesized by a simple casting method with five different ratios [0.1, 0.3, 0.5, 0.7 and 1% Vol.] of ZnONPs. The samples of the nanocomposites were characterized by the scanning electron microscopy (SEM) technique. The flexural strength and hardness tests were carried out to study the mechanical properties of the composites. From the observation it was found that the mechanical property increases up to certain filler 0.5 vol. % and then properties gradually decrease.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. [1] G. Kranthi, A. Satapathy, Computational Materials Science, 49(3), 609 (2010); https://doi.org/10.1016/j.commatsci.2010.06.00110.1016/j.commatsci.2010.06.001 ↗
2. [2] R.F. Landel, L.E. Nielsen, Mechanical properties of polymers and composites, CRC press1993; https://doi.org/10.1201/b1692910.1201/b16929 ↗
3. [3] X. Chen, Q. Guo, Y. Mi, Journal of applied polymer science, 69(10), 1891 (1998); https://doi.org/10.1002/(SICI)1097-4628(19980906)69:10<1891::AID-APP1>3.0.CO;2-910.1002/(SICI)1097-4628(19980906)69:10<1891::AID-APP1>3.0.CO;2-9 ↗
4. [4] B.M. Alshabander, A.A. Mohammed, A.S. Khalil, Journal of Molecular and Engineering Materials, 6(01n02), 1850002 (2018); https://doi.org/10.1142/S225123731850002810.1142/S2251237318500028 ↗
5. [5] T.W. Clyne, D. Hull, An introduction to composite materials, Cambridge university press, 2019; https://doi.org/10.1017/978113905058610.1017/9781139050586 ↗
6. [6] K.K. Chawla, Composite materials: science and engineering, Springer Science & Business Media, 2012.
7. [7] M. Stasiak, M. Molenda, M. Bańda, E. Gondek, Fuel, 159900 (2015).
8. [8] M.P. Krishna, M.R. Krishna, Y. Jyothi, G.R.K. Swami, Materials Today: Proceedings, 5(5), 13025 (2018); https://doi.org/10.1016/j.matpr.2018.02.28810.1016/j.matpr.2018.02.288 ↗
9. [9] S.I. Husaen, Baghdad Science Journal, 9(2), 330 (2012); https://doi.org/10.21123/bsj.9.2.330- 33410.21123/bsj.9.2.330-334 ↗
10. [10] J.-P. Pascault, R.J. Williams, Epoxy polymers: new materials and innovations, John Wiley & Sons, 2009; https://doi.org/10.1002/978352762870410.1002/9783527628704 ↗
11. [11] F.-L. Jin, X. Li, S.-J. Park, Journal of Industrial and Engineering Chemistry, 291 (2015).
12. [12] H. Gu, C. Ma, J. Gu, J. Guo, X. Yan, J. Huang, Q. Zhang, Z. Guo, Journal of Materials Chemistry C, 4(25), 5890 (2016); https://doi.org/10.1039/C6TC01210H10.1039/C6TC01210H ↗
13. [13] A.M. Ali, M.A. Jaber, N.A. Toama, Iraqi Journal of Science, 1128 (2021); https://doi.org/10.24996/ijs.2021.62.4.910.24996/ijs.2021.62.4.9 ↗
14. [14] N. Baig, I. Kammakakam, W. Falath, Materials Advances, 2(6), 1821 (2021); https://doi.org/10.1039/D0MA00807A10.1039/D0MA00807A ↗
15. [15] M.S.S.A. Saraswathi, A. Nagendran, D. Rana, Journal of Materials Chemistry A, 7(15), 8723 (2019); https://doi.org/10.1039/C8TA11460A10.1039/C8TA11460A ↗
16. [16] R.A. Dheyab, A.A. Hussein, A.A. Saeed, Iraqi Journal of Science, 4342 (2021); https://doi.org/10.24996/ijs.2021.62.11(SI).1510.24996/ijs.2021.62.11(SI).15 ↗
17. [17] L. Reinprecht, Z. Vidholdová, Wood Research, 62(1), 37 (2017); https://doi.org/10.1155/2018/268012110.1155/2018/2680121 ↗
18. [18] J. Wang, R. Chen, L. Xiang, S. Komarneni, Ceramics International, 44(7), 7357 (2018); https://doi.org/10.1016/j.ceramint.2018.02.01310.1016/j.ceramint.2018.02.013 ↗
19. [19] N.K. Abass, Z.J. Shanan, T.H. Mohammed, L.K. Abbas, Baghdad Science Journal, 15(2), (2018).10.21123/bsj.2018.15.2.0198 ↗
20. [20] A.H. Battez, R. González, J. Viesca, J. Fernández, J.D. Fernández, A. Machado, R. Chou, J. Riba, Wear, 265(3-4), 422 (2008); https://doi.org/10.1016/j.wear.2007.11.01310.1016/j.wear.2007.11.013 ↗
21. [21] Ü. Özgür, Y.I. Alivov, C. Liu, A. Teke, M. Reshchikov, S. Doğan, V. Avrutin, S.-J. Cho, Morkoç, Journal of Applied Physics, 98(4), 11 (2005); https://doi.org/10.1063/1.199266610.1063/1.1992666 ↗
22. [22] Y.Y. Kasim, G.G. Ali, M.H. Younus, Iraqi Journal of Science, 130 (2021); https://doi.org/10.24996/ijs.2021.62.1.1210.24996/ijs.2021.62.1.12 ↗
23. [23] A. Bhatnagar, Lightweight ballistic composites: military and law-enforcement applications, Woodhead Publishing2016.
24. [24] J.-C. Lin, L. Chang, M. Nien, H. Ho, Composite structures, 74(1), 30 (2006); https://doi.org/10.1016/j.compstruct.2005.03.00610.1016/j.compstruct.2005.03.006 ↗
25. [25] G.K. Nahedh, A.H. Majeed, Journal of Engineering and Sustainable Development (JEASD), 25(Special_ Issue_2021), (2021); https://doi.org/10.31272/jeasd.conf.2.2.1310.31272/jeasd.conf.2.2.13 ↗
26. [26] S.M. Aharoni, Journal of Applied Polymer Science, 16(12), 3275 (1972); https://doi.org/10.1002/app.1972.07016121910.1002/app.1972.070161219 ↗
27. [27] S. Wu, Journal of Applied Polymer Science, 46(4), 619 (1992); https://doi.org/10.1002/app.1992.07046040810.1002/app.1992.070460408 ↗
28. [28] H. Williams, Physics Education, 57(2), 025016 (2022); https://doi.org/10.1088/1361-6552/ac3f7510.1088/1361-6552/ac3f75 ↗
29. [29] L.W. McKeen, Fatigue and tribological properties of plastics and elastomers, William Andrew2016; https://doi.org/10.1016/B978-0-323-44201-5.00001-010.1016/B978-0-323-44201-5.00001-0 ↗
30. [30] A. Nassar, E. Nassar, nanoscience and nanoengineering, 1(2), 89 (2013); https://doi.org/10.13189/nn.2013.01020110.13189/nn.2013.010201 ↗
31. [31] K. Muralishwara, U.A. Kini, S. Sharma, Materials Research Express, 6(8), 082007 (2019); https://doi.org/10.1088/2053-1591/ab1e1510.1088/2053-1591/ab1e15 ↗
32. [32] K. Herrmann, Hardness testing: principles and applications, ASM international, 2011; https://doi.org/10.31399/asm.tb.htpa.978162708346110.31399/asm.tb.htpa.9781627083461 ↗
33. [33] M.A. Alam, U.A. Samad, A. Anis, M. Alam, M. Ubaidullah, S.M. Al-Zahrani, Polymers, 13(9), 1490 (2021); https://doi.org/10.3390/polym1309149010.3390/polym13091490 ↗
34. [34] R.S. Sabry, M.I. Al-Mosawi, Surface Engineering, 34(2), 151 (2018); https://doi.org/10.1080/02670844.2016.127062010.1080/02670844.2016.1270620 ↗
35. [35] X. Wang, Q. Zhang, Powder Technology, 37155 (2020).