Thermal conductivity of Cu-Ti/diamond composites via spark plasma sintering
Source abstract
Abstract
Abstract Copper matrix composites reinforced with 50 vol% diamond particles were prepared by spark plasma sintering. The diamond particles, Cu-Ti alloy powder and Cu power were mixed in different mass ratios and sintered at a temperature of 925 °C for 10 min in vacuum. Effects of Ti content on microstructure and thermal conductivity of the Cu-xTi/diamond composites were studied in the range of 0–1 wt%. With Ti content increasing, the thermal conductivity of the Cu-Ti/diamond composites increases first and then decreases. The highest thermal conductivity of 529 W/(m·K) was obtained in the Cu-0.2Ti/diamond composite owing to the improved interfacial bonding and lower interfacial thermal resistance. The diffuse mismatch model and Hasselman-Johnson model were used to calculate the theoretical thermal conductivity of the Cu-Ti/diamond composites. It is shown that moderate content of Ti addition is good for improving the thermal conductivity of Cu/diamond composites, which is consistent with experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Advances in high-performance thermal management materials: a review
2. Thermal materials solve power electronics challenges
3. Aluminum/diamond composites: a preparative method to characterize reactivity and selectivity at the interface10.1016/j.scriptamat.2012.02.012 ↗
4. Selective interfacial bonding in Al(Si)–diamond composites and its effect on thermal conductivity10.1016/j.compscitech.2006.03.016 ↗
5. Microstructure and thermal behavior of diamond/Cu composites: effects of surface modification10.1016/j.diamond.2018.04.020 ↗
6. Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications10.1016/j.scriptamat.2007.10.011 ↗
7. Interfacial design of Cu-based composites prepared by powder metallurgy for heat sink applications10.1016/j.msea.2006.12.146 ↗
8. High thermal conductivity composite of diamond particles with tungsten coating in a copper matrix for heat sink application10.1016/j.applthermaleng.2012.04.063 ↗
9. Microstructure and interfacial characteristics of aluminium–diamond composite materials10.1016/j.diamond.2003.11.095 ↗
10. Processing of diamond-particle-dispersed silver-matrix composites in solid–liquid co-existent state by SPS and their thermal conductivity10.1016/j.compositesb.2011.08.003 ↗
11. High thermal conductive diamond/Ag–Ti composites fabricated by low-cost cold pressing and vacuum liquid sintering techniques10.1016/j.diamond.2014.02.003 ↗
12. Theoretical modelling for interface design and thermal conductivity prediction in diamond/Cu composites10.1016/j.diamond.2017.11.010 ↗
13. Effects of dual-layer coatings on microstructure and thermal conductivity of diamond/Cu composites prepared by vacuum hot pressing10.1016/j.surfcoat.2015.07.059 ↗
14. Combining Cr pre-coating and Cr alloying to improve the thermal conductivity of diamond particles reinforced Cu matrix composites10.1016/j.jallcom.2018.03.241 ↗
15. Microstructure and thermal conductivity of Cu/diamond composites with Ti-coated diamond particles produced by gas pressure infiltration10.1016/j.jallcom.2015.06.062 ↗
16. Mo2C coating on diamond: different effects on thermal conductivity of diamond/Al and diamond/Cu composites. Appli10.1016/j.apsusc.2017.01.078 ↗
17. On the thermal conductivity of Cu-Zr/diamond composites10.1016/j.matdes.2012.09.006 ↗
18. Thermal conductivity of diamond composites sintered under high pressures10.1016/j.diamond.2007.12.051 ↗
19. Optimized thermal properties in diamond particles reinforced copper titanium matrix composites produced by gas pressure infiltration10.1016/j.compositesa.2016.10.005 ↗
20. High thermal conductivity of Cu-B/diamond composites prepared by gas pressure infiltration10.1016/j.jallcom.2017.11.273 ↗
21. Thermal conductivity of Cu-Zr/diamond composites produced by high temperature-high pressure method10.1016/j.compositesb.2014.08.023 ↗
22. Fabrication and thermal conductivity of near-net-shaped diamond/copper composites by pressureless infiltration10.1007/s10853-011-5307-0 ↗
23. Synthesis and characterization of the diamond/copper composites produced by the pulse plasma sintering (PPS) method10.1016/j.diamond.2012.05.008 ↗
24. Spark plasma sintering of titanium-coated diamond and copper-titanium powder to enhance thermal conductivity of diamond/copper composites10.1016/j.mssp.2015.01.041 ↗
25. Thermal conductivity of SPS consolidated Cu/diamond composites with Cr-coated diamond particles10.1016/j.jallcom.2009.10.040 ↗
26. Effect of boron addition on the thermal properties of diamond-particle-diapersed cu-matrix composites fabricated by SPS
27. Thermal properties of diamond-particle-dispersed cu-matrix-composites fabricated by spark plasma sintering (SPS)10.4028/www.scientific.net/MSF.638-642.2115 ↗
28. Evolution process of the synthesis of TiC in the Cu-Ti-C system10.1016/j.jallcom.2006.11.024 ↗
29. The thermal conductivity of metallic ceramics10.1007/s11837-998-0131-y ↗
30. Effective thermal conductivity of composites with interfacial thermal barrier resistance10.1177/002199838702100602 ↗
31. Thermal boundary resistance10.1103/RevModPhys.61.605 ↗
32. Kapitza conductance and heat flow between solids at temperatures from 50 to 300 K10.1103/PhysRevB.48.16373 ↗
33. Modeling of the electronic structure, chemical bonding, and properties of ternary silicon carbide Ti3SiC210.1134/S0022476611040226 ↗