Influence of agglomerated diamond abrasive wear on sapphire material removal behavior
Source abstract
Abstract
Abstract Further to explore the effect of the agglomerated diamond (AD) abrasive wear on material removal behavior of sapphire in lapping, the pin-on-disk test with an AD abrasive was carried out. The classifications of AD abrasive wear, material removal behavior of sapphire, friction coefficient of sliding contact and removal ratio of sapphire material were thoroughly investigated. The wear behavior of the AD abrasive shows two types: attrition wear and micro-fracture. Three wear statuses of the active cutting diamond grains fixed on the AD abrasive surface, including attrition wear, worn-flat and pull-out, occur in the tests. The sapphire material is mainly removed by the AD abrasive via plastic deformation. The micro-fracture feature of the AD abrasive improves its self-sharpening ability. Therefore, the micro-cutting action of the AD abrasive on the sapphire wafer has behaved well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Hardness and fracture toughness of CVD diamond film10.1016/0925-9635(95)00346-0 ↗
2. Study on removal mechanism and removal characters for SiC and fused silica by fixed abrasive diamond pellets10.1016/j.ijmachtools.2014.04.008 ↗
3. Study on the processing characteristics of SiC and sapphire substrates polished by semi-fixed and fixed abrasive tools10.1016/j.triboint.2016.09.003 ↗
4. Diamond particle shape: its measurement and influence in abrasive wear10.1016/j.triboint.2008.04.007 ↗
5. Study of the behaviour of diamond saw-blades in stone processing10.1016/0924-0136(94)01603-X ↗
6. Characteristics of diamond sawblade wear in sawing10.1016/0890-6955(95)00071-2 ↗
7. Investigation of the worn surfaces of diamond sawblades in sawing granite10.1016/S0924-0136(97)00033-2 ↗
8. Mosaic diamond pad conditioners for improved CMP performance10.1149/1.3360677 ↗
9. Brazed diamond grid: a revolutionary design for diamond saws10.1016/S0925-9635(99)00086-2 ↗
10. Diamond growth on an array of seeds: the revolution of diamond production10.1016/j.tsf.2005.07.091 ↗
11. The brazing of diamond10.1016/j.ijrmhm.2008.11.011 ↗
12. Joseph · 2002
13. Innovations in abrasive products for precision grinding10.1016/S0007-8506(07)60031-6 ↗
14. Bonner · 2014
15. Bonner · 2006
16. A study on polishing of molds using hydrophilic fixed abrasive pad10.1016/j.ijmachtools.2004.04.006 ↗
17. Relationship between mechanical properties and processing performance of agglomerated diamond abrasive compared with single diamond abrasive10.1016/j.diamond.2019.107595 ↗
18. Comparison of lapping performance between fixed agglomerated diamond pad and fixed single crystal diamond pad10.1016/j.wear.2019.202963 ↗
19. Ductile-regime grinding: a new technology for machining brittle materials10.1115/1.2899676 ↗
20. Ductile-regime grinding of brittle materials: experimental results and the development of a model10.1117/12.948055 ↗
21. Specific grinding energy as an in-process control variable for ductile-regime grinding10.1016/0141-6359(91)90003-2 ↗
22. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
23. A critical evaluation of indentation techniques for measuring the hardness vs toughness: a review
24. Experimental investigation of material removal mechanism in single grit grinding10.1016/j.ijmachtools.2012.07.010 ↗
25. Zum Gahr · 1987
26. Quantitative analysis of the loads acting on the abrasive grits in the diamond sawing of granites10.1016/S0924-0136(02)00574-5 ↗
27. Experimental study on temperatures and energy partition at the diamond-granite interface in grinding10.1016/S0301-679X(01)00039-1 ↗
28. Modelling of specific energy requirement during high-efficiency deep grinding10.1016/j.ijmachtools.2008.03.008 ↗
29. Simulation of hexa-octahedral diamond grain cutting tests using the SPH method10.1016/j.procir.2013.06.110 ↗