Vacuum tribological properties and impact toughness of polycrystalline diamond based on titanium-coated diamond particle
Source abstract
Abstract
Abstract In this work, the diamond particles were deposited with titanium (Ti) by the magnetron sputtering, and the polycrystalline diamond compact synthesized by the Ti-coated diamond particles (Ti-PDC) was prepared by high temperature and high pressure (HTHP) sintering method. The scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) results show that the Ti coating uniformly distributes on the surface of diamond particles. The results of X-ray diffraction (XRD) indicate that the TiC phase has been produced during the sintering process. The impact toughness of the Ti-PDC is higher than that of the pristine polycrystalline diamond compact (P-PDC). In addition, the friction coefficients of Ti-PDC under different vacuum conditions reveal lower values than those of the P-PDC. A less number of exfoliated pits can be observed on the worn Ti-PDC surface. The improved impact toughness and vacuum friction performance of Ti-PDC may be attributed to the enhanced bonding strength between diamond particles, which is induced by the TiC phase. In brief, the Ti-coated diamond particles can improve the bonding strength between diamond grains and thus yield to an enhanced service performance of the PDC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Sintered superhard materials10.1126/science.208.4446.873 ↗
2. Ultrahard polycrystalline diamond from graphite10.1038/421599b ↗
3. Materials science-designing superhard materials10.1126/science.1109830 ↗
4. Trends and recent developments in the material manufacture and cutting tool application of polycrystalline diamond and polycrystalline cubic boron nitride10.1016/S0263-4368(00)00015-9 ↗
5. High-pressure, high-temperature synthesis of SiC–diamond nanocrystalline ceramics10.1063/1.1288602 ↗
6. Q.S. Bai, Y.X. Yao, P. Bex, G, Zhang, Study on wear mechanisms and grain effects of PCD tool in machining laminated flooring. Int. J. Refract. Met. Hard Mater. 2004; 22(2–3): 111–115. doi:https://doi.org/10.1016/j.ijrmhm.2004.01.007.10.1016/j.ijrmhm.2004.01.007 ↗
7. Controllable wear behaviors of silicon nitride sliding against sintered polycrystalline diamond via altering humidity10.1111/jace.15421 ↗
8. K. Zacny, D. Currie, G. Paulsen, T. Szwarc, P, Chu, Development and testing of the pneumatic lunar drill for the emplacement of the corner cube reflector on the moon. Planet Space Sci. 2012; 71(1): 131–141. doi:https://doi.org/10.1016/j.pss.2012.07.025.10.1016/j.pss.2012.07.025 ↗
9. Downhole measurement and monitoring lead to an enhanced understanding of drilling vibrations and polycrystalline diamond compact bit damage10.2118/134488-PA ↗
10. Sintering of polycrystalline diamond cutting tools10.1016/j.matdes.2005.09.018 ↗
11. Vacuum tribological properties of a-C: H film in relation to internal stress and applied load10.1016/j.triboint.2013.11.004 ↗
12. Effect of quenching processes on microstructures and tribological behaviors of polycrystalline diamond compact (PCD/WC-Co) in annealing treatment10.1016/j.diamond.2017.09.006 ↗
13. Mechanical properties of polycrystalline diamonds10.1179/mst.1988.4.11.949 ↗
14. Synthesis and properties of single phase diamond ceramics10.1016/S0925-9635(99)00180-6 ↗
15. Behavior of cobalt infiltration and abnormal grain growth during sintering of diamond on cobalt substrate10.1007/BF01106798 ↗
16. The fracture and fatigue of sintered diamond compact10.1007/BF00550720 ↗
17. The microanalysis of the bonding condition between coated diamond and matrix10.1016/S0263-4368(02)00103-8 ↗
18. Study of Ti-coated diamond grits prepared by spark plasma coating10.1016/j.diamond.2017.06.004 ↗
19. Properties and applications of Ti-coated diamond grits10.1016/S0924-0136(02)00661-1 ↗
20. Wear behavior of diamond-silicon nitride composites sintered with FAST/SPS10.1016/j.wear.2016.10.021 ↗
21. Friction and wear behaviors of polycrystalline diamond under vacuum conditions10.1016/j.ijrmhm.2014.11.008 ↗
22. Wear and failure mechanisms of polycrystalline diamond compact bits10.1016/0043-1648(92)90149-3 ↗
23. Residual stresses in polycrystalline diamond compacts10.1016/S0263-4368(99)00007-4 ↗
24. Fracture toughness and thermal resistance of polycrystalline diamond compacts10.1016/0921-5093(95)10105-5 ↗
25. Role of cobalt of polycrystalline diamond compact (PDC) in drilling process10.1016/j.diamond.2016.03.025 ↗
26. Effect of loading rate on the fracture toughness and failure mechanisms of polycrystalline diamond (PCD)10.1016/j.ijrmhm.2016.06.011 ↗
27. Improved vacuum tribological properties of sintered polycrystalline diamond compacts treated by high temperature annealing10.1016/j.carbon.2017.09.039 ↗
28. Wear performances and mechanisms of ultrahard polycrystalline diamond composite material grinded against granite10.1016/j.ijrmhm.2015.07.014 ↗
29. Effect of sliding mating materials on vacuum tribological behaviors of sintered polycrystalline diamond10.1016/j.ijrmhm.2015.07.025 ↗
30. Mechanical behavior of diamond matrix composites with ceramic Ti3(Si,Ge)C2 bonding phase10.1016/j.ijrmhm.2014.09.017 ↗
31. Impact fatigue fracture of polycrystalline diamond compact (PDC) cutters and the effect of microstructure10.1016/j.ijrmhm.2014.06.003 ↗
32. Thermal degradation of sintered diamond compacts10.1007/BF01148782 ↗
33. Vacuum conditions dependence of the tribological behaviors of sintered polycrystalline diamond sliding against silicon nitride10.1016/j.ijrmhm.2016.08.007 ↗