Laboratory efficiency of additive manufacturing for removable denture frameworks: A literature-based review
Source abstract
Abstract
The purpose of this literature review was to verify the laboratory efficiency of additive manufacturing (AM) systems for removable partial denture (RPD) frameworks. All available relevant articles in English published from 1990 to 2020 were found by searching online databases and by hand research. A total of 17 articles dealt with the surface roughness, fitness accuracy, and retentive forces of AM frameworks. The surface roughness of AM was inferior to that of casting and milling. Whether conventional cast or AM RPD frameworks had superior fitness accuracy could not be clarified. As compared with casting and AM, milling enabled the fabrication of RPD clasps with comparable or better fitness accuracy. Over time, AM clasps had retentive force values of superior consistency as compared with those of conventional cast clasps. Clasps fabricated by repeated laser sintering and high-speed milling could obtain smoother surfaces and more suitable retention than those of AM clasps.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Removable Prosthodontics, Tsurumi University School of Dental Medicine
References (35)
Show source-provided references
1. 1) Ohkubo C, Sato Y, Nishiyama Y, Suzuki Y. Titanium removable denture based on a one-metal rehabilitation concept. Dent Mater J 2017; 36: 517-523.10.4012/dmj.2017-137 ↗
2. 2) ASTM International, Committee F42 on Additive Manufacturing Technologies, 2009. ISO/ASTM52900-S52915. Standard terminology for additive manufacturing —general principles— terminology. West Conshohocken: ASTM International, Committee F42 on Additive Manufacturing Technologies; 2009.
3. 3) Revilla-León M, Ceballos L, Martínez-Klemm I, Özcan M.Discrepancy of complete-arch titanium frameworks manufactured using selective laser melting and electron beam melting additive manufacturing technologies. J Prosthet Dent 2018; 120: 942-947.10.1016/j.prosdent.2018.02.010 ↗
4. 4) Strub JR, Rekow ED, Witkowski S. Computer-aided design and fabrication of dental restorations: Current systems and future possibilities. J Am Dent Assoc 2006; 137: 1289-1296.10.14219/jada.archive.2006.0389 ↗
5. 5) Azari A, Nikzad S. The evolution of rapid prototyping in dentistry: A review. Rapid Prototyp J 2009; 15: 216-225.10.1108/13552540910961946 ↗
6. 6) Abduo J, Lyons K, Bennamoun M. Trends in computer-aided manufacturing in prosthodontics: A review of the available streams. Int J Dent 2014; 2014: 783948.10.1155/2014/783948 ↗
7. 7) Salmi M, Paloheimo KS, Tuomi J, Ingman T, Mäkitie A. A digital process for additive manufacturing of occlusal splints: A clinical pilot study. J R Soc Interface 2013; 10: 20130203.10.1098/rsif.2013.0203 ↗
8. 8) Martorelli M, Gerbino S, Giudice M, Ausiello P. A comparison between customized clear and removable orthodontic appliances manufactured using RP and CNC techniques. Dent Mater 2013; 29: e1-e10.10.1016/j.dental.2012.10.011 ↗
9. 9) Chen H, Wang H, Lv P, Wang Y, Sun Y. Quantitative evaluation of tissue surface adaption of CAD-designed and 3D printed wax pattern of maxillary complete denture. Biomed Res Int 2015; 2015: 453968.10.1155/2015/453968 ↗
10. 10) Wu J, Zhang C, Gao B, Wang X, Zhao X. A study on the fabrication method of removable partial denture framework by computer-aided design and rapid prototyping. Rapid Prototyp J 2012; 18: 318-323.10.1108/13552541211231743 ↗
11. 11) Giacomo GD, Silva J, Martines R, Ajzen S. Computer-designed selective laser sintering surgical guide and immediate loading dental implants with definitive prosthesis in edentulous patient: A preliminary method. Eur J Dent 2014; 8: 100-106.10.4103/1305-7456.126257 ↗
12. 12) Beguma Z, Chhedat P. Rapid prototyping —when virtual meets reality. Int J Comput Dent 2014; 17: 297-306.
13. 13) Prabhu R, Prabhu G, Baskaran E, Arumugam EM. Clinical acceptability of metal-ceramic fixed partial dental prosthesis fabricated with direct metal laser sintering technique-5 year follow-up. J Indian Prosthodont Soc 2016; 16: 193-197.10.4103/0972-4052.176526 ↗
14. 14) Forrester K, Sheridan R, Phoenix R. Assessing the accuracy of casting and additive manufacturing techniques for fabrication of a complete palatal coverage metal framework. J Prosthodont 2019; 28: 811-817.10.1111/jopr.13076 ↗
15. 15) Soltanzadeh P, Suprono MS, Kattadiyil MT, Goodacre C, Gregorius W. An in vitro investigation of accuracy and fit of conventional and CAD/CAM removable partial denture frameworks. J Prosthodont 2019; 28: 547-555.10.1111/jopr.12997 ↗
16. 16) Ye H, Ning J, Li M, Niu L, Yang J, Sun Y, et al. Preliminary clinical application of removable partial denture frameworks fabricated using computer-aided design and rapid prototyping techniques. Int J Prosthodont 2017; 30: 348-353.10.11607/ijp.5270 ↗
17. 17) Tasaka A, Shimizu T, Kato Y, Okano H, Ida Y, Higuchi S, et al. Accuracy of removable partial denture framework fabricated by casting with a 3D printed pattern and selective laser sintering. J Prosthodont Res 2020; 64: 224-230.10.1016/j.jpor.2019.07.009 ↗
18. 18) Chen J, Ahmad R, Suenaga H, Li W, Sasaki K, Swain M, et al. Shape optimization for additive manufacturing of removable partial dentures —A new paradigm for prosthetic CAD/CAM. PLoS One 2015; 10: e 0132552.10.1371/journal.pone.0132552 ↗
19. 19) Keltjens HM, Mulder J, Kayser AF, Creugers NH: Fit of direct retainers in removable partial dentures after 8 years of use. J Oral Rehabil 1997; 24: 138-142.10.1046/j.1365-2842.1997.d01-266.x ↗
20. 20) Arnold C, Hey J, Schweyen R, Setz J. Accuracy of CAD-CAM-fabricated removable partial dentures. J Prosthet Dent 2018; 119: 586-592.10.1016/j.prosdent.2017.04.017 ↗
21. 21) Torii M, Nakata T, Takahashi K, Kawamura N, Shimpo H, Ohkubo C. et al. Fitness and retentive force of cobalt-chromium alloy clasps fabricated with repeated laser sintering and milling. J Prosthodont Res 2018; 62: 342-346.10.1016/j.jpor.2018.01.001 ↗
22. 22) Koike M, Greer P, Owen K, Lilly G, Murr LE, Gaytan SM et al. Evaluation of titanium alloys fabricated using rapid prototyping technologies —electron beam melting and laser beam melting. Materials 2011; 4: 1776-1792.10.3390/ma4101776 ↗
23. 23) Takahashi K, Torii M, Nakata T, Kawamura N, Shimpo H, Ohkubo C. Fitness accuracy and retentive forces of additive manufactured titanium clasp. J Prosthodont Res 2020; 13; 1883-1958.10.1016/j.jpor.2020.01.001 ↗
24. 24) Nakata T, Shimpo H, Ohkubo C. Clasp fabrication using one-process molding by repeated laser sintering and high-speed milling. J Prosthodont Res 2017; 61: 276-282.10.1016/j.jpor.2016.10.002 ↗
25. 25) Schweiger J, Güth J, Erdelt K, Edelhoff D, Schubert O. Internal porosities, retentive force, and survival of cobalt-chromium alloy clasps fabricated by selective laser-sintering. J Prosthodont Res 2020; 64: 210-216.10.1016/j.jpor.2019.07.006 ↗
26. 26) Williams RJ, Bibb R, Eggbeer D, Collis J. Use of CAD/CAM technology to fabricate a removable partial denture framework. J Prosthet Dent 2006; 96: 96-99.10.1016/j.prosdent.2006.05.029 ↗
27. 27) Bibb R, Eggbeer D. Rapid manufacture of removable partial denture frameworks. Rapid Prototyp J 2006; 12: 95-9910.1108/13552540610652438 ↗
28. 28) Gao B, Wu J, Zhao X, Tan H. Fabricating titanium denture base plate by laser rapid forming. Rapid Prototyp J 2009; 15: 133-136.10.1108/13552540910943432 ↗
29. 29) Tregerman I, Renne W, Kelly A, Wilson D. Evaluation of removable partial denture frameworks fabricated using 3 different techniques. J Prosthet Dent 2019; 122: 390-395.10.1016/j.prosdent.2018.10.013 ↗
30. 30) Almufleh B, Emami E, Alageel O, de Melo F, Seng F, Caron E.Patient satisfaction with laser-sintered removable partial dentures: a crossover pilot clinical trial. J Prosthet Dent 2018; 119: 560-567.10.1016/j.prosdent.2017.04.021 ↗
31. 31) Alharbi N, Osman RB, Wismeijer D. Factors influencing the dimensional accuracy of 3D-printed full coverage dental restorations using stereolithography technology. Int J Prosthodont 2016; 29: 503-510.10.11607/ijp.4835 ↗
32. 32) Osman RB, Alharbi N, Wismeijer D. Build angle: Does it influence the accuracy of 3D-printed dental restorations using digital light-processing technology. Int J Prosthodont 2017; 30: 182-188.10.11607/ijp.5117 ↗
33. 33) Mitteramskogler G, Gmeiner R, Felzmann R, Gruber S, Hofstetter C, Stampfl J et al. Light curing strategies for lithography-based additive manufacturing of customized ceramics. Add Manuf 2014; 1-4: 110-118.10.1016/j.addma.2014.08.003 ↗
34. 34) Stansbury JW, Idacavage MJ. 3D printing with polymers: Challenges among expanding options and opportunities. Dent Mater 2016; 32: 54-64.10.1016/j.dental.2015.09.018 ↗
35. 35) Wilkes J, Hagedorn YC, Meiners W, Wissenbach K. Additive manufacturing of ZrO2-Al2O3 ceramic components by selective laser melting. Rapid Prototyp J 2013; 19: 51-57.10.1108/13552541311292736 ↗