Toughening of highly translucent zirconia by monoclinic ZrO2 and SiO2 particle coating
Source abstract
Abstract
The mechanical properties of highly translucent partially stabilized zirconia (PSZ) need to be improved; however, improvement of mechanical properties often decreases translucency. To overcome this problem, a monoclinic ZrO2 (mZrO2)/SiO2 dispersion was prepared and applied as a coating material for PSZ. The influence of surface treatment by the mZrO2/SiO2 dispersion on the surface topography, crystallography, and mechanical properties of highly translucent PSZ was investigated in this study. Following the treatment, the mechanical strength of highly translucent PSZ improved by 170% compared with control, for the best mZrO2/SiO2 dispersion ratio and heating temperature condition, while maintaining its translucency. The proposed coating is promising for improving the mechanical properties of highly translucent PSZ.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Biomaterials, Graduate School of Medicine, Dentistry and Pharmaceutical Sciences, Okayama University
Department of Comprehensive Dentistry, Graduate School of Medicine, Dentistry and Pharmaceutical Sciences, Okayama University
References (32)
Show source-provided references
1. 1) Luthardt RG, Holzhüter M, Sandkuhl O, Herold V, Schnapp JD, Kuhlisch E, et al. Reliability and properties of ground Y-TZP-zirconia ceramics. J Dent Res 2002; 81: 487-491.10.1177/154405910208100711 ↗
2. 2) Jeong SM, Ludwig K, Kern M. Investigation of the fracture resistance of three types of zirconia posts in all-ceramic post-and-core restorations. Int J Prosthodont 2002; 15: 154-158.
3. 3) Chevalier J, Grenmillard L, Virkar AV, Clarke DR. The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends. J Am Ceram Soc 2009; 92: 1901-1920.10.1111/j.1551-2916.2009.03278.x ↗
4. 4) Pereira GK, Silvestri T, Camargo R, Rippe MP, Amaral M, Kleverlaan CJ, et al. Mechanical behavior of a Y-TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging. Mater Sci Eng C Mater Biol Appl 2016; 63: 70-77.10.1016/j.msec.2016.02.049 ↗
5. 5) Matsui K, Yamakawa T, Uehara M, Enomoto N, Hojo J. Mechanism of alumina-enhanced sintering of fine zirconia powder: Influence of alumina concentration on the initial stage sintering. J Am Ceram Soc 2008; 91: 1888-1897.10.1111/j.1551-2916.2008.02350.x ↗
6. 6) Mao L, Kaizer MR, Zhao M, Guo B, Song YF, Zhang Y. Graded ultra-translucent zirconia (5Y-PSZ) for strength and functionalities. J Dent Res 2018; 97: 1222-1228.10.1177/0022034518771287 ↗
7. 7) Inokoshi M, Shimizu H, Nozaki K, Takagaki T, Yoshihara K, Nagaoka N, et al. Crystallographic and morphological analysis of sandblasted highly translucent dental zirconia. Dent Mater 2018; 34: 508-518.10.1016/j.dental.2017.12.008 ↗
8. 8) Zhang F, Inokoshi M, Batuk M, Hadermann J, Naert I, Van Meerbeek B, et al. Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations. Dent Mater 2016; 32: e327-337.10.1016/j.dental.2016.09.025 ↗
9. 9) Nakamura T, Nakano Y, Usami H, Wakabayashi K, Ohnishi H, Sekino T, et al. Translucency and low-temperature degradation of silica-doped zirconia: A pilot study. Dent Mater J 2016; 35: 571-577.10.4012/dmj.2015-274 ↗
10. 10) Toyama DY, Alves LMM, Ramos GF, Campos TMB, de Vasconcelos G, Borges ALS, et al. Bioinspired silica-infiltrated zirconia bilayers: Strength and interfacial bonding. J Mech Behav Biomed Mater 2019; 89: 143-149.10.1016/j.jmbbm.2018.09.013 ↗
11. 11) Promakhov V, Kulkov N. Thermal expansion of oxide systems on the basis of ZrO2. J Silic Based Compos Mater 2014; 66: 81-83.
12. 12) Hayashi H, Saitou T, Maruyama N, Inaba H. Thermal expansion coefficient of yttria stabilized zirconia for various yttria contents. Solid State Ion 2005; 176: 613-619.10.1016/j.ssi.2004.08.021 ↗
13. 13) Ezoe M, Murase Y, Daimon K, Kato E. Formation and thermal change of monoclinic zirconia polycrystalline thin films by Sol–Gel process. Yogyo-Kyokaishi 1986; 94: 823-826.10.2109/jcersj1950.94.1092_823 ↗
14. 14) Murase Y, Kato E. Preparation of zirconia whiskers from zirconium hydroxide in sulfuric acid solutions under hydrothermal conditions at 200°C. J Am Ceram Soc 2001; 84: 2705-2706.10.1111/j.1151-2916.2001.tb01076.x ↗
15. 15) Wille S, Zumstrull P, Kaidas V, Jessen LK, Kern M. Low temperature degradation of single layers of multilayered zirconia in comparison to conventional unshaded zirconia: Phase transformation and flexural strength. J Mech Behav Biomed Mater 2018; 77: 171-175.10.1016/j.jmbbm.2017.09.010 ↗
16. 16) Pecho OE, Ghinea R, Ionescu AM, Cardona Jde L, Paravina RD, Pérez Mdel M. Color and translucency of zirconia ceramics, human dentine and bovine dentine. J Dent 2012; 40: e34-40.10.1016/j.jdent.2012.08.018 ↗
17. 17) Johnston WM, Ma T, Kienle BH. Translucency parameter of colorants for maxillofacial prostheses. Int J Prosthodont 1995; 8: 79-86.
18. 18) Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T. Current status of zirconia restoration. J Prosthodont Res 2013; 57: 236-261.10.1016/j.jpor.2013.09.001 ↗
19. 19) Hoydalsvik K, Barnardo T, Winter R, Haas S, Tatchev D, Hoell A. Yttria-zirconia coatings studied by grazing-incidence small-angle X-ray scattering during in situ heating. Phys Chem Chem Phys 2010; 12: 14492-14500.10.1039/c0cp00472c ↗
20. 20) Ryan DPO, Fais LMG, Antonio SG, Hatanaka GR, Candido LM, Pinelli LAP. Y-TZP zirconia regeneration firing: Microstructural and crystallographic changes after grinding. Dent Mater J 2017; 36: 447-453.10.4012/dmj.2016-124 ↗
21. 21) Venkatesh G, Thenmuhil D, Vidyavathy SM, Vinothan R. Effect of addition of nano zirconia in ceramic glazes. Adv Mater Res 2014; 984-985: 488-494.10.4028/www.scientific.net/AMR.984-985.488 ↗
22. 22) Kuwabara A, Tohei T, Yamamoto T, Tanaka I. Ab initio lattice dynamics and phase transformations of ZrO2. Phys Rev B 2005; 71: 064301.10.1103/PhysRevB.71.064301 ↗
23. 23) Patil RN, Subbarao EC. Axial thermal expansion of ZrO2 and HfO2 in the range room temperature to 1400°C. J Appl Crystallogr 1969; 2: 281-288.10.1107/S0021889869007217 ↗
24. 24) Subbarao EC, Maiti HS, Srivastava KK. Martensitic transformation in zirconia. Phys Status Solidi 1974; 21: 9-40.10.1002/pssa.2210210102 ↗
25. 25) Wu NL, Wu TF. Thermodynamic stability of tetragonal zirconia nanocrystallites. J Mater Res 2001; 16: 666-669.10.1557/JMR.2001.0114 ↗
26. 26) Shukla S, Seal S, Vij R, Bandyopadhyay S, Rahman Z. Effect of nanocrystallite morphology on the metastable tetragonal phase stabilization in zirconia. Nano Lett 2002; 2: 989-993.10.1021/nl025660b ↗
27. 27) Ahlawat R, Aghamkar P. Infuence of annealing temperature on Y2O3:SiO2 nanocomposite prepared by sol-gel process. Acta Phys Pol A 2014; 126: 736-739.10.12693/APhysPolA.126.736 ↗
28. 28) Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now? Dent Mater 2011; 27: 71-82.10.1016/j.dental.2010.10.022 ↗
29. 29) Tzanakakis E-GC, Tzoutzas IG, Koidis PT. Is there a potential for durable adhesion to zirconia restorations? A systematic review. J Prosthet Dent 2016; 115: 9-19.10.1016/j.prosdent.2015.09.008 ↗
30. 30) Okada M, Inoue K, Irie M, Taketa H, Torii Y, Matsumoto T. Resin adhesion strengths to zirconia ceramics after primer treatment with silane coupling monomer or oligomer. Dent Mater J 2017; 36: 600-605.10.4012/dmj.2016-334 ↗
31. 31) Kim HJ, Lim HP, Park YJ, Vang MS. Effect of zirconia surface treatments on the shear bond strength of veneering ceramic. J Prosthet Dent 2011; 105: 315-322.10.1016/S0022-3913(11)60060-7 ↗
32. 32) Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T. Current status of zirconia restoration. J Prosthodont Res 2013; 57: 236-261.10.1016/j.jpor.2013.09.001 ↗