Dentin bonding: Influence of bonded surface area and crosshead speed on bond strength
Source abstract
Abstract
This study investigated the influence of the bonded surface area and the crosshead speed on the dentin bond strengths of self-etch adhesives. Bovine mandibular incisors were mounted in self-curing resin and the facial surfaces were wet ground with #600 silicon carbide (SiC) paper. The dentin surfaces were treated according to the manufacturer's instructions. Adhesives were applied, and the resin composites were condensed into molds (2.4 or 4.0 mm in internal diameter), placed on to the dentin, and then light activated. Ten samples per test group were shear tested at crosshead speeds of 0.1, 0.5, 1.0, 5.0, and 10.0 mm/min. The results showed that higher crosshead speeds were associated with higher dentin bond strengths. This relationship was more significant for specimens with a smaller dentin bonding surface area.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Research and COVID-19
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Operative Dentistry, Nihon University School of Dentistry
Department of General Dentistry, Creighton University School of Dentistry
References (30)
Show source-provided references
1. 1) Van Meerbeek B, Peumans M, Poitevin A, Mine A, Van Ende A, Neves A, De Munck J. Relationship between bond-strength tests and clinical outcomes. Dent Mater 2010; 26: e100-e121.10.1016/j.dental.2009.11.148 ↗
2. 2) Burke FJT, Hussain A, Nolan L, Fleming GJP. Methods used in dentine bonding tests: an analysis of 102 investigations on bond strength. Eur J Prosthodont Restor Dent 2008; 16: 158-165.
3. 3) Scherrer SS, Cesar PF, Swain MV. Direct comparison of the bond strength results of the different test methods: a critical literature review. Dent Mater 2010; 26: e78-e93.10.1016/j.dental.2009.12.002 ↗
4. 4) Leloup G, D’Hoore W, Bouter D, Degrange M, Vreven J. Meta-analytical review of factors involved in dentin adherence. J Dent Res 2001; 80: 1605-1614.10.1177/00220345010800070301 ↗
5. 5) Poitevin A, De Munck J, Van Landuyt K, Coutinho E, Peumans M, Lambrechts P, Van Meerbeek B. Critical analysis of the influence of different parameters on the microtensile bond strength of adhesives to dentin. J Adhes Dent 2008; 10: 7-16.
6. 6) Braga RR, Meira JBC, Boaro LCC, Xavier TA. Adhesion to tooth structure: a critical review of “macro” test methods. Dent Mater 2010; 26: e38-e49.10.1016/j.dental.2009.11.150 ↗
7. 7) Van Noort R, Noroozi S, Howard IC, Cardew G. A critique of bond strength measurements. J Dent 1989; 17: 61-67.10.1016/0300-5712(89)90131-0 ↗
8. 8) DeHoff PH, Anusavice KJ, Wang Z. Three-dimensional finite element analysis of the shear bond test. Dent Mater 1995; 11: 126-131.10.1016/0109-5641(95)80047-6 ↗
9. 9) Placido E, Meira JB, Lima RG, Muench A, de Souza RM, Ballester RY. Shear versus micro-shear bond strength test: a finite element stress analysis. Dent Mater 2007; 23: 1086-1092.10.1016/j.dental.2006.10.002 ↗
10. 10) Oshida Y, Miyazaki M. Dentin bonding system. Part II: Effect of crosshead speed. Biomed Mater Eng 1996; 6: 87-100.
11. 11) Musanje L, Darvell BW. Effects of strain rate and temperature on the mechanical properties of resin composites. Dent Mater 2004; 20: 750-765.10.1016/j.dental.2003.11.008 ↗
12. 12) Schilke R, Bauss O, Lisson JA, Schuckar M, Geurtsen W. Bovine dentin as a substitute for human dentin in shear bond strength measurements. Am J Dent 1999; 12: 92-96.
13. 13) Belli S, Unlü N, Ozer F. Bonding strength to two different surfaces of dentin under simulated pulpal pressure. J Adhes Dent 2001; 3: 145-152.
14. 14) Sudsangiam S, van Noort R. Do dentin bond strength tests serve a useful purpose?. J Adhes Dent 1999; 1: 57-67.
15. 15) Zhao D, Botsis J, Drummond JL. Fracture studies of selected dental restorative composites. Dent Mater 1997; 13: 198-207.10.1016/S0109-5641(97)80027-9 ↗
16. 16) Al-Assaf K, Chakmakchi M, Palaghias G, Karanika-Kouma A, Eliades G. Interfacial characteristics of adhesive luting resins and composites with dentine. Dent Mater 2007; 23: 829-839.10.1016/j.dental.2006.06.023 ↗
17. 17) Baran GR, McCool JI, Boberick KG, Zhang HQ. Size effect in resin/glass composite flexure strengths. J Oral Rehabil 1999; 26: 775-780.10.1046/j.1365-2842.1999.00451.x ↗
18. 18) Phrukkanon S, Burrow MF, Tyas MJ. Effect of cross-sectional surface area on bond strengths between resin and dentin. Dent Mater 1998; 14: 120-128.10.1016/S0109-5641(98)00018-9 ↗
19. 19) Van Landuyt KL, Mine A, De Munck J, Jaecques S, Peumans M, Lambrechts P, Van Meerbeek B. Are one-step adhesives easier to use and better performing? Multifactorial assessment of contemporary one-step self-etching adhesives. J Adhes Dent 2009; 11: 175-190.
20. 20) Van Meerbeek B, Willems G, Celis JP, Roos JR, Braem M, Lambrechts P, Vanherle G. Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area. J Dent Res 1993; 72: 1434-1442.10.1177/00220345930720101401 ↗
21. 21) Pongprueksa P, Kuphasuk W, Senawongse P. The elastic moduli across various types of resin/dentin interfaces. Dent Mater 2008; 24: 1102-1106.10.1016/j.dental.2007.12.008 ↗
22. 22) Cadenaro M, Antoniolli F, Sauro S, Tay FR, Di Lenarda R, Prati C, Biasotto M, Contardo L, Breschi L. Degree of conversion and permeability of dental adhesives. Eur J Oral Sci 2005; 113: 525-530.10.1111/j.1600-0722.2005.00251.x ↗
23. 23) Rosakis AJ, Ravi-Chandar K. On crack-tip stress state: An experimental evaluation of three-dimensional effects. Int J Solids Structures 1986; 22: 121-134.10.1016/0020-7683(86)90002-8 ↗
24. 24) Phrukkanon S, Burrow MF, Hartley PG, Tyas MJ. The influence of the modification of etched bovine dentin on bond strengths. Dent Mater 1998; 14: 212-221.10.1016/S0109-5641(98)00034-7 ↗
25. 25) Versluis A, Tantbirojn D, Douglas WH. Why do shear bond tests pull out dentin?. J Dent Res 1997; 76: 1298-1307.10.1177/00220345970760061001 ↗
26. 26) Musanje L, Darvell BW. Effects of strain rate and temperature on the mechanical properties of resin composites. Dent Mater 2004; 20: 750-765.10.1016/j.dental.2003.11.008 ↗
27. 27) Siviour CR, Walley SM, Proud WG, Field JE. The high strain rate compressive behaviour of polycarbonate and polyvinylidene difluoride. Polymer 2005; 46: 12546-12555.10.1016/j.polymer.2005.10.109 ↗
28. 28) Guo Y, Lia Y. Quasi-static/dynamic response of SiO2-epoxy nanocomposites. Mater Sci Eng A 2007; 458: 330-335.10.1016/j.msea.2007.02.011 ↗
29. 29) Hsiao HM, Daniel IM, Cordes ED. Strain rate effects on the transverse compressive and shear behavior of unidirectional composites. J Compos Mater 1999; 33: 1620-1642.10.1177/002199839903301703 ↗
30. 30) Hara AT, Pimenta LA, Rodrigues AL Jr. Influence of cross-head speed on resin-dentin shear bond strength. Dent Mater 2001;17: 165-169.10.1016/S0109-5641(00)00060-9 ↗