Shear bond strength of different bonding agents to orthodontic metal bracket and zirconia
Source abstract
Abstract
This study aimed to evaluate the shear bond strength (SBS) of four bonding agents used to bond metal brackets to zirconia under different storage conditions. Four bonding agents were used [FLC: (Fuji ORTHO LC), XT: (TransbondTM XT), RUC-SBU: (Rely XTM Ultimate Clicker Adhesive Resin Cement+Single Bond Universal), and RUC-GBU: (Rely XTM Ultimate Clicker Adhesive Resin Cement+Gluma Bond Universal)] to bond two types of metal brackets (PT/3M) to zirconia surfaces, and they were stored in water at 37ºC for 24 h or thermocycling for 3,000 cycles. The SBS data of RUC-SBU and RUC-GBU using PT brackets were significantly higher than those of 3M brackets before and after thermocycling. It could be concluded that RUC-SBU and RUC-GBU could offer sufficient bond strength between metal brackets and zirconia for the short term compared with FLC and XT. The design of brackets can significantly affect the bond strength to zirconia.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School and Hospital of Stomatology, China Medical University, Liaoning Provincial Key Laboratory of Oral Disease
Department of Dental Materials Science, School and Hospital of Stomatology, China Medical University, Liaoning Provincial Key Laboratory of Oral Disease
Department of Restorative Dentistry, Division of Oral Health Science, Faculty of Dental Medicine, Hokkaido University
References (42)
Show source-provided references
1. 1) Zarone F, Russo S, Sorrentino R. From porcelain-fused-to-metal to zirconia: Clinical and experimental considerations. Dent Mater 2011; 27: 83-96.10.1016/j.dental.2010.10.024 ↗
2. 2) Sivaraman K, Chopra A, Narayan A, Balakrishnan D. Is zirconia a viable alternative to titanium for oral implant? A critical review. J Prosthodont Res 2018; 62: 121-133.10.1016/j.jpor.2017.07.003 ↗
3. 3) Atsu SS, Kilicarslan MA, Kucukesmen HC, Aka PS. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent 2006; 95: 430-436.10.1016/j.prosdent.2006.03.016 ↗
4. 4) Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: Where are we now? Dent Mater 2011; 27: 71-82.10.1016/j.dental.2010.10.022 ↗
5. 5) Öztürk-Bozkurt F, Toz T, Kara-Tuncer A, Gzükara-Ba H, Özcan M. Clinical evaluation of silorane and nano-hybrid resin composite restorations in class ii cavities up to 3 years. Oper Dent 2016; 41: 599-606.10.2341/15-259-C ↗
6. 6) Ewoldsen N, Demke RS. A review of orthodontic cements and adhesives. Am J Orthod Dentofacial Orthop 2001; 120: 45-48.10.1067/mod.2001.117207 ↗
7. 7) Zhu J, Tang A, Matinlinna J, Hägg U. Acid etching of human enamel in clinical applications: A systematic review. J Prosthet Dent 2014; 112: 122-135.10.1016/j.prosdent.2013.08.024 ↗
8. 8) Albaladejo A, Montero J, Gomez de Diego R, Lopez-Valverde A.Effect of adhesive application prior to bracket bonding with flowable composites. Angle Orthod 2011; 81: 716-720.10.2319/062310-344.1 ↗
9. 9) Krämer N, Schmidt M, Lücker S, Domann E, Frankenberger R.Glass ionomer cement inhibits secondary caries in an in vitro biofilm model. Clin Oral Investig 2018; 22: 1019-1031.10.1007/s00784-017-2184-1 ↗
10. 10) Arash V, Naghipour F, Ravadgar M, Karkhah A, Barati MS. Shear bond strength of ceramic and metallic orthodontic brackets bonded with self-etching primer and conventional bonding adhesives. Electron Physician 2017; 9: 3584-3591.10.19082/3584 ↗
11. 11) Fernandes TM, Janson G, Somensi J, Pinzan A, Francisconi PA, Sathler R, et al. Effects of modifying the bonding protocol on the shear bond strength of metallic and ceramic orthodontic brackets. Gen Dent 2012; 60: 51-55.
12. 12) Mirzakouchaki B, Kimyai S, Hydari M, Shahrbaf S, Mirzakouchaki-Boroujeni P. Effect of self-etching primer/adhesive and conventional bonding on the shear bond strength in metallic and ceramic brackets. Med Oral Patol Oral Cir Bucal 2012; 17: e164-170.10.4317/medoral.17024 ↗
13. 13) Juntavee P, Kumchai H, Juntavee N, Nathanson D. Effect of ceramic surface treatment and adhesive systems on bond strength of metallic brackets. Int J Dent 2020; 2020: 1-8.10.1155/2020/7286528 ↗
14. 14) Trakyali G, Malkondu O, Kazazoğlu E, Arun T. Effects of different silanes and acid concentrations on bond strength of brackets to porcelain surfaces. Eur J Orthod 2009; 31: 402-406.10.1093/ejo/cjn118 ↗
15. 15) Hellak A, Ebeling J, Schauseil M, Stein S, Roggendorf M, Korbmacher-Steiner H. Shear bond strength of three orthodontic bonding systems on enamel and restorative materials. Biomed Res Int 2016; 2016: 1-10.10.1155/2016/6307107 ↗
16. 16) Zarif Najafi H, Moradi M, Torkan S. Effect of different surface treatment methods on the shear bond strength of orthodontic brackets to temporary crowns. Int Orthod 2019; 17: 89-95.10.1016/j.ortho.2019.01.017 ↗
17. 17) Byeon S, Lee M, Bae T. Shear Bond Strength of Al2O3 sandblasted Y-TZP ceramic to the orthodontic metal bracket. Materials (Basel) 2017; 10: 148.10.3390/ma10020148 ↗
18. 18) Hallmann L, Ulmer P, Wille S, Polonskyi O, Köbel S, Trottenberg T, et al. Effect of surface treatments on the properties and morphological change of dental zirconia. J Prosthet Dent 2016; 115: 341-349.10.1016/j.prosdent.2015.09.007 ↗
19. 19) Rippe M, Amaral R, Oliveira F, Cesar P, Scotti R, Valandro L, et al. Evaluation of tensile retention of Y-TZP crowns cemented on resin composite cores: Effect of the cement and Y-TZP surface conditioning. Oper Dent 2015; 40: E1-E10.10.2341/13-310-L ↗
20. 20) Inokoshi M, De Munck J, Minakuchi S, Van Meerbeek B. Meta-analysis of bonding effectiveness to zirconia ceramics. J Dent Res 2014; 93: 329-334.10.1177/0022034514524228 ↗
21. 21) Kitayama S, Nikaido T, Takahashi R, Zhu L, Ikeda M, Foxton R, et al. Effect of primer treatment on bonding of resin cements to zirconia ceramic. Dent Mater 2010; 26: 426-432.10.1016/j.dental.2009.11.159 ↗
22. 22) Şanlı S, Çömlekoğlu M, Çömlekoğlu E, Sonugelen M, Pamir T, Darvell B. Influence of surface treatment on the resin-bonding of zirconia. Dent Mater 2015; 31: 657-668.10.1016/j.dental.2015.03.004 ↗
23. 23) Akyil M, Uzun I, Bayindir F. Bond strength of resin cement to yttrium-stabilized tetragonal zirconia ceramic treated with air abrasion, silica coating, and laser irradiation. Photomed Laser Surg 2010; 28: 801-808.10.1089/pho.2009.2697 ↗
24. 24) Akın H, Ozkurt Z, Kırmalı O, Kazazoglu E, Ozdemir A. Shear bond strength of resin cement to zirconia ceramic after aluminum oxide sandblasting and various laser treatments. Photomed Laser Surg 2011; 29: 797-802.10.1089/pho.2011.3039 ↗
25. 25) Casucci A, Monticelli F, Goracci C, Mazzitelli C, Cantoro A, Papacchini F, et al. Effect of surface pre-treatments on the zirconia ceramic-resin cement microtensile bond strength. Dent Mater 2011; 27: 1024-1030.10.1016/j.dental.2011.07.002 ↗
26. 26) Noronha M, Fronza B, André C, de Castro E, Soto-Montero J, Price R, et al. Effect of zirconia decontamination protocols on bond strength and surface wettability. J Esthet Restor Dent 2020; 32: 521-529.10.1111/jerd.12615 ↗
27. 27) Negreiros W, Ambrosano G, Giannini M. Effect of cleaning agent, primer application and their combination on the bond strength of a resin cement to two yttrium-tetragonal zirconia polycrystal zirconia ceramics. Eur J Dent 2017; 11: 6-11.10.4103/ejd.ejd_276_16 ↗
28. 28) Amaral M, Belli R, Cesar P, Valandro L, Petschelt A, Lohbauer U.The potential of novel primers and universal adhesives to bond to zirconia. J Dent 2014; 42: 90-98.10.1016/j.jdent.2013.11.004 ↗
29. 29) Magne P, Paranhos M, Burnett L. New zirconia primer improves bond strength of resin-based cements. Dent Mater 2010; 26: 345-352.10.1016/j.dental.2009.12.005 ↗
30. 30) Papia E, Larsson C, du Toit M, Vult von Steyern P. Bonding between oxide ceramics and adhesive cement systems: A systematic review. J Biomed Mater Res B Appl Biomater 2014; 102: 395-413.10.1002/jbm.b.33013 ↗
31. 31) Nagaoka N, Yoshihara K, Feitosa V, Tamada Y, Irie M, Yoshida Y, et al. Chemical interaction mechanism of 10-MDP with zirconia. Sci Rep 2017; 7: 45563.10.1038/srep45563 ↗
32. 32) Chen L, Suh B, Brown D, Chen X. Bonding of primed zirconia ceramics: evidence of chemical bonding and improved bond strengths. Am J Dent 2012; 25: 103-108.
33. 33) Goracci C, Özcan M, Franchi L, Di Bello G, Louca C, Vichi A. Bracket bonding to polymethylmethacrylate-based materials for computer-aided design/manufacture of temporary restorations: Influence of mechanical treatment and chemical treatment with universal adhesives. Korean J Orthod 2019; 49: 404-412.10.4041/kjod.2019.49.6.404 ↗
34. 34) Reynolds IR, Fraunhofer JV. Direct bonding of orthodontic attachments to teeth: The relation of adhesive bond strength to gauze mesh size. Br J Orthod 1976; 3: 91-95.10.1179/bjo.3.2.91 ↗
35. 35) Park SR, Wang X, Wang B, Hockin XU, Bai Y. The long observation in vitro of prevention effect of novel self-etching orthodontic adhesive modified with 2-methacryloxyethyl phosphorylcholine in enamel demineralization. Dent Mater J 2019; 40: 631-640.10.4012/dmj.2019-193 ↗
36. 36) Maaßen M, Wille S, Kern M. Bond strength of adhesive luting systems to human dentin and their durability. J Prosthet Dent 2021; 125: 182-188.10.1016/j.prosdent.2019.07.012 ↗
37. 37) Godoy-Bezerra J, Vieira S, Oliveira J, Lara F. Shear bond strength of resin-modified glass ionomer cement with saliva present and different enamel pretreatments. Angle Orthod 2006; 76: 470-474.
38. 38) Cook PA, Youngson CC. An in vitro study of the bond strength of a glass ionomer cement in the direct bonding of orthodontic brackets. Br J Orthod 1996; 15: 247-253.10.1179/bjo.15.4.247 ↗
39. 39) Knox J, Hubsch P, Jones ML, Middleton J. The influence of bracket base design on the strength of the bracket-cement interface. J Orthod 2000; 27: 249-254.10.1179/ortho.27.3.249 ↗
40. 40) Wang W, Li C, Chou T, Wang D, Lin L, Lin C. Bond strength of various bracket base designs. Am J Orthod Dentofacial Orthop 2004; 125: 65-70.10.1016/j.ajodo.2003.01.003 ↗
41. 41) Vila-Nova TEL, Gurgel de Carvalho IH, Moura DMD, Batista AUD, Zhang Y, Paskocimas CA, et al. Effect of finishing/ polishing techniques and low temperature degradation on the surface topography, phase transformation and flexural strength of ultra-translucent ZrO2 ceramic. Dent Mater 2020; 36: e126-e139.10.1016/j.dental.2020.01.004 ↗
42. 42) Zhao L, Jian YT, Wang XD, Zhao K. Bond strength of primer/cement systems to zirconia subjected to artificial aging. J Prosthet Dent 2016; 116: 790-766.10.1016/j.prosdent.2016.03.020 ↗