Synthesis of novel acryloyloxyalkyl and methacryloyloxyalkyl 6,8-dithiooctanoates and evaluation of their bonding performances to precious metals and alloys
Source abstract
Abstract
This study investigated the bonding effectiveness of novel acryloyloxyalkyl and methacryloyloxyalkyl 6,8-dithiooctanoates (dithiooctanoate monomers) to precious metals and alloys. Eight kinds of dithiooctanoate monomers were synthesized in 16.09-39.34% yields. They were characterized and confirmed as new compounds using (1)H- and (13)C-NMR spectroscopy and mass spectral analysis. Eight experimental primers each containing 5.0 wt% of a novel dithiooctanoate monomer in acetone were prepared. After primer treatment and 2,000 thermal cycles, tensile bond strengths of MMA-PMMA/TBBO resin to seven metal adherends were measured. Results were as follows: 17.2-29.3 MPa (Au), 41.9-49.6 MPa (Ag), 36.8-47.6 MPa (Pt), 36.7-47.5 MPa (Pd), 34.0-48.9 MPa (Au alloy), 24.3-49.6 MPa (Ag alloy), 35.0-48.8 MPa (Au-Ag-Pd alloy). 10-Methacryloyloxydecyl 6,8-dithiooctanoate exhibited the highest mean bond strength to gold (29.3 MPa) and 12-methacryloyloxydodecyl 6,8-dithiooctanoate to Au alloy (48.9 MPa). Therefore, it was found that the novel dithiooctanoate monomers synthesized in this study exhibited excellent bonding to precious metals and alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Dental materials and restorations · Organometallic Compounds Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. 1) Tanaka T, Hirano M, Kawahara H, Matsumura H, Atsuta M. A new ion-coating surface treatment of alloys for dental adhesive resins. J Dent Res 1988; 67: 1376-1380.10.1177/00220345880670110301 ↗
2. 3) Gates WD, Diaz-Arnold AM, Aquilino SA, Ryther JS. Comparison of the adhesive strength of a BIS-GMA cement to tin-plated and non-tin-plated alloys. J Prosthet Dent 1993; 69: 12-16.10.1016/0022-3913(93)90232-D ↗
3. 4) Dixon DL, Breeding LC, Hughie ML, Brown JS. Comparison of shear bond strengths of two resin luting systems for a base and high noble metal alloy bonded to enamel. J Prosthet Dent 1994; 72: 457-461.10.1016/0022-3913(94)90114-7 ↗
4. 6) Kern M, Thompson VP. Sandblasting and silica-coating of dental alloys: volume loss, morphology and changes in the surface composition. Dent Mater 1993; 9: 155-161.10.1016/0109-5641(93)90113-5 ↗
5. 7) Caeg C, Leinfelder KF, Lacefield WR, Bell W. Effectiveness of a method used in bonding resins to metal. J Prosthet Dent 1990; 64: 37-41.10.1016/0022-3913(90)90150-B ↗
6. 8) Ohno H, Araki Y, Endo K. A new method for promoting adhesion between precious metal alloys and dental adhesives. J Dent Res 1992; 71: 1326-1331.10.1177/00220345920710061001 ↗
7. 9) Bain CD, Troughton EB, Tao YT, Evall J, Whitesides GM, Nuzzo RG. Formation of monolayer films by the spontaneous assembly of organic thiols from solution onto gold. J Am Chem Soc 1989; 111: 321-335.10.1021/ja00183a049 ↗
8. 10) Nuzzo RG, Dubois LH, Allara DL. Fundamental studies of microscopic wetting on organic surfaces. 1. Formation and structural characterization of a self-consistent series of polyfunctional organic monolayers. J Am Chem Soc 1990; 112: 558-569.10.1021/ja00158a012 ↗
9. 11) Suzuki M, Miyazaki T, Hisamitsu H, Kadoma Y, Morioka Y. Study on chemical reaction of methylthiirane on gold colloid by surface-enhanced Raman scattering. Langmuir 1999; 15: 7409-7410.10.1021/la990639k ↗
10. 12) Suzuki M, Yamamoto M, Fujishima A, Miyazaki T, Hisamitsu H, Kojima K, Kadoma Y. Raman and IR studies on adsorption behavior of adhesive monomers in a metal primer for Au, Ag, Cu, and Cr surfaces. J Biomed Mater Res 2002; 62: 37-45.10.1002/jbm.10244 ↗
11. 13) Kadoma Y. Adhesive properties and kinetic polymerization behavior of resins containing adhesion promoting monomers for precious metals. Dent Mater J 2005; 24: 335-341.10.4012/dmj.24.335 ↗
12. 14) Matsumura H, Shimoe S, Nagano K, Atsuta M. Effect of noble metal conditioners on bonding between prosthetic composite material and silver-palladium-copper-gold alloy. J Prosthet Dent 1999; 81: 710-714.10.1016/S0022-3913(99)70111-3 ↗
13. 15) Kadoma Y. Chemical structures of adhesion promoting monomers for precious metals and their bond strength to dental metals. Dent Mater J 2003; 22: 343-358.10.4012/dmj.22.343 ↗
14. 16) Ikemura K, Endo T. Syntheses of adhesive-promoting monomers bearing carboxylic moieties and their bonding performance with new polymerization initiators comprising 5-monosubstituted barbituric acids. J Adhes Soc Jpn 1998; 34: 138-149.
15. 17) Omura I, Yamauchi J. Correlation between molecular structure of adhesive monomer and adhesive property. Proceedings of the International Congress on Dental Materials; 1989 Nov 1-4; Honolulu, Hawaii, USA (1989). p.356.
16. 19) Okuya N, Minami H, Kurashige H, Murahara S, Suzuki S, Tanaka T. Effect of metal primers on bonding of adhesive resin cement to noble alloys for porcelain fusing. Dent Mater J 2010; 29: 177-187.10.4012/dmj.2009-068 ↗
17. 20) Kojima K, Kadoma Y, Ikemura K. (Meth)acrylic ester derivatives. United States Patent No. 5670657 (1997).