Effect of surface treatment of CAD/CAM resin composites on the shear bond strength of self-adhesive resin cement
Source abstract
Abstract
This study examined the effects of sandblasting, hydrofluoric acid etching and priming on the shear bond strength of self-adhesive resin cement between seven different CAD/CAM resin composites and a resin composite core material at 24-h after cement mixing. Five surface treatments [control (C), sandblasting (S), priming (P), sandblasting with priming (SP), and 9% HF etching with priming (HFP)] were performed respectively for disc specimens of CAD/CAM blocks. There were no significant differences in bond strength among the C, S, and P, except for one block (p>0.05). SP showed a greater bond strength than S. Weibull moduli were not changed significantly among all treatments for all blocks, whereas the strengths with 5% and 95% failure probability of SP and HFP showed greater values than the others. The bond strengths of HFP were comparable to those of SP. Priming after sandblasting or HF etching could be effective to increase the bond strength of CAD/CAM blocks.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Dental Biomaterials Science, Department of Restorative and Biomaterials Sciences, Meikai University School of Dentistry
References (41)
Show source-provided references
1. 1) Ankyu S, Nakamura K, Harada A, Hong G, Kanno T, Niwano Y, et al. Fatigue analysis of computer-aided design/computer aided manufacturing resin-based composite vs. lithium desilicated glass-ceramic. Eur J Oral Sci 2016; 124: 387-395.10.1111/eos.12278 ↗
2. 2) Fonzar FR, Carrabba M, Sedda M, Ferrari M, Goracci C, Vichi A. Flexural resistance of heat-pressed and CAD-CAM lithium disilicate with different translucencies. Dent Mater 2017; 33: 63-70.10.1016/j.dental.2016.10.005 ↗
3. 3) Sagsoz O, Sagsoz NP. Chemical degradation of dental CAD/CAM materials. Biomed Mater Eng 2019; 30: 419-426.10.3233/BME-191063 ↗
4. 4) Lauvahutanon S, Takahashi H, Shiozawa M, Iwasaki N, Asakawa Y, Oki M, et al. Mechanical properties of composite resin blocks for CAD/CAM. Dent Mater J 2014; 33: 705-710.10.4012/dmj.2014-208 ↗
5. 5) Awada A, Nathanson D. Mechanical properties of resin-ceramic CAD/CAM restorative materials. J Prosthet Dent 2015; 114: 587-593.10.1016/j.prosdent.2015.04.016 ↗
6. 6) Lawson NC, Bansal R, Burgess JO. Wear, strength, modulus and hardness of CAD/CAM restorative materials. Dent Mater 2016; 32: e275-e283.10.1016/j.dental.2016.08.222 ↗
7. 7) Mainjot AK, Dupont NM, Oudkerk JC, Dewael TY, Sadoun MJ. From artisanal to CAD/CAM blocks: State of the art of indirect composites. J Dent Res 2016; 95: 487-495.10.1177/0022034516634286 ↗
8. 8) Nguyen JF, Migonney V, Ruse ND, Sadoun M. Resin composite blocks via high-pressure high-temperature polymerization. Dent Mater 2012; 28: 529-534.10.1016/j.dental.2011.12.003 ↗
9. 9) Nguyen JF, Migonney V, Ruse ND, Sadoun M. Properties of experimental urethane dimethacrylate-based dental resin composite blocks obtained via thermo-polymerization under high pressure. Dent Mater 2013; 29: 535-541.10.1016/j.dental.2013.02.006 ↗
10. 10) Chaiyabutr Y, Kois JC, Lebeau D, Nunokawa G. Effect of abutment tooth color, cement color, and ceramic thickness on the resulting optical color of a CAD/CAM glass-ceramic lithium disilicate reinforced crown. J Prosthet Dent 2011; 105: 83-90.10.1016/S0022-3913(11)60004-8 ↗
11. 11) Nakajima H. Esthetic posterior restorative materials: a materials science perspective. J Jpn Dent Assoc 2019; 72: 473-482.
12. 12) Krejci I, Daher R. Stress distribution difference between Lava Ultimate full crowns and IPS e.max CAD full crowns on a natural tooth and on tooth-shaped implant abutments. Odontology 2017; 105: 254-256.10.1007/s10266-016-0276-z ↗
13. 13) Alnazzawi A, Watts DC. Simultaneous determination of polymerization shrinkage, exotherm and thermal expansion coefficient for dental resin-composites. Dent Mater 2012; 28: 1240-1249.10.1016/j.dental.2012.09.004 ↗
14. 14) Koytchev E, Yamaguchi S, Shin-no Y, Suzaki N, Okamoto M, Imazato S, et al. Comprehensive micro-mechanical characterization of experimental direct core build-up resin composites with different amounts of filler contents. Dent Mater J 2019; 38: 743-749.10.4012/dmj.2018-190 ↗
15. 15) Suese K, Kitsukata M, Tsuji I, Sawamura N. Clinical investigation of CAD/CAM crowns on premolars after two years progress. Ann Jpn Prosthodont Soc 2019; 11: 45-55.10.2186/ajps.11.45 ↗
16. 16) Shinya A, Miura S, Koizumi H, Hikita K, Mine A. Current status and future prospect of CAD/CAM composite crown. Ann Jpn Prosthodont Soc 2017; 9: 1-15.10.2186/ajps.9.1 ↗
17. 17) Higashi M, Matsumoto M, Kawaguchi A, Miura J, Minamino T, Kabetani T, et al. Bonding effectiveness of self-adhesive and conventional-type adhesive resin cements to CAD/CAM resin blocks. Part 1: Effects of sandblasting and silanization. Dent Mater J 2016; 35: 21-28.10.4012/dmj.2015-234 ↗
18. 18) Elsaka SE. Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement: The effect of surface treatments. J Adhes Dent 2014; 16: 531-540.
19. 19) Peumans M, Valjakova EB, De Munck J, Mishevska CB, Meerbeek BV. Bonding effectiveness of luting composites to different CAD/CAM materials. J Adhes Dent 2016; 18: 289-302.
20. 20) Venturini AB, Prochnow C, Pereira GKR, Werner A, Kleverlaan CJ, Valandro LF. The effect of hydrofluoric acid concentration on the fatigue failure load of adhesively cemented feldspathic ceramic discs. Dent Mater 2018; 34: 667-675.10.1016/j.dental.2018.01.010 ↗
21. 21) Nagasawa Y, Hibino Y, Eda Y, Shigeta H, Nakajima H. Effect of hydrofluoric acid surface treatment of the ceramic for CAD/ CAM crowns on the shear bond strength of self-adhesive resin cement. Jpn J Conserv Dent 2019; 62: 17-26.
22. 22) Hori S, Minami H, Minesaki Y, Matsumura H, Tanaka T. Effect of hydrofluoric acid etching on shear bond strength of an indirect resin composite to an adhesive cement Dent Mater J 2008; 27: 515-522.10.4012/dmj.27.515 ↗
23. 23) Flury S, Schmidt SZ, Peutzfeldt A, Lussi A. Dentin bond strength of two resin-ceramic computer-aided design/ computer-aided manufacturing (CAD/CAM) materials and five cements after six months storage. Dent Mater J 2016; 35: 728-735.10.4012/dmj.2016-095 ↗
24. 24) Straface A, Rupp L, Gintaute A, Fischer J, Zitzmann NU, Rohr N. HF etching of CAD/CAM materials: influence of HF concentration and etching time on shear bond strength. Head Face Med 2019; 15: 21.10.1186/s13005-019-0206-8 ↗
25. 25) Hibino Y, Kuramochi K, Harashima A, Honda M, Yamazaki A, Nagasawa Y, et al. Correlation between the strength of glass ionomer cements and their bond strength to bovine teeth. Dent Mater J 2004; 23: 656-660.10.4012/dmj.23.656 ↗
26. 26) Puppin-Rontani J, Sundfeld D, Costa AR, Correr AB, Puppin-Rontani RM, Borges GA, et al. Effect of hydrofluoric acid concentration and etching time on bond strength to lithium disilicate glass ceramic. Oper Dent 2017; 42: 606-615.10.2341/16-215-L ↗
27. 27) Kim JE, Kim JH, Shim JS, Roh BD, Shin Y. Effect of air-particle pressures on the surface topography and bond strengths of resin cement to the hybrid ceramics. Dent Mater J 2017; 36: 454-460.10.4012/dmj.2016-293 ↗
28. 28) Kawagichi-Uemura A, Mine A, Matsumoto M, Tajiri Y, Higashi M, Kabetani T, et al. Adhesion procedure for CAD/ CAM resin crown bonding: reduction of bond strengths due to artificial saliva contamination. J Prosthodont Res 2018; 62: 177-183.10.1016/j.jpor.2017.08.006 ↗
29. 29) Motevasselian F, Amiri Z, Chiniforush N, Mirzaei M, Thompson V. In vitro evaluation of the effect of different surface treatments of a hybrid ceramic on the microtensile bond strength to a luting resin cement. J Lasers Med Sci 2019; 10: 297-303.10.15171/jlms.2019.48 ↗
30. 30) Awad MM, Albedaiwi L, Almahdy A, Khan R, Silikas N, Hatamleh MM, et al. Effect of universal adhesives on microtensile bond strength to hybrid ceramic. BMC Oral Health 2019; 19: 178.10.1186/s12903-019-0865-7 ↗
31. 31) Yoshihara K, Nagaoka N, Maruo Y, Nishigawa G, Irie M, Yoshida Y, et al. Sandblasting may damage the surface of composite CAD/CAM blocks. Dent Mater 2017; 33: e124-e135.10.1016/j.dental.2016.12.003 ↗
32. 32) Naruse Y, Takagaki T, Matsui N, Sato T, Ali A, Ikeda M, et al. Effect of alumina-blasting pressure on adhesion of CAD/CAM resin block to dentin. Dent Mater J 2018; 37: 805-811.10.4012/dmj.2017-237 ↗
33. 33) Carrabba M, Nagasawa Y, Parrini S, Doldo T, Wood D, Ferrari M.Zirconia translucency and cement systems as factors influencing the zirconia-titanium and zirconia-zirconia shear bond strength. Int J Oral Maxillofac Implants 2019; 34: 1053-1058.10.11607/jomi.7212 ↗
34. 34) Yano HT, Ikeda H, Nagamatsu Y, Masaki C, Hosokawa R, Shimizu H. Correlation between microstructure of CAD/CAM composites and the silanization effect on adhesive bonding. J Mech Behav Biomed Mater 2019; 101: 103441.10.1016/j.jmbbm.2019.103441 ↗
35. 35) Murillo-Gómez F, Palma-Dibb RG, De Goes MF. Effect of acid etching on tridimensional microstructure of etchable CAD/ CAM materials. Dent Mater 2018; 34: 944-955.10.1016/j.dental.2018.03.013 ↗
36. 37) Elsaka SE. Repair bond strength of resin composite to a novel CAD/CAM hybrid ceramic using different repair systems. Dent Mater J 2015; 34: 161-167.10.4012/dmj.2014-159 ↗
37. 38) El Zohairy AA, De Gee AJ, Mohsen MM, Feilzer AJ. Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dent Mater 2003; 19: 575-583.10.1016/S0109-5641(02)00107-0 ↗
38. 39) Bähr N, Keul C, Edelhoff D, Eichberger M, Roos M, Gernet W, et al. Effect of different adhesives combined with two resin composite cements on shear bond strength to polymeric CAD/CAM materials. Dent Mater J 2013; 32: 492-501.10.4012/dmj.2012-329 ↗
39. 40) Arao N, Yoshida K, Sawase T. Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/ CAM composite materials and the bond strength of resin cements. J Appl Oral Sci 2015; 23: 629-636.10.1590/1678-775720150261 ↗
40. 42) Uwalaka CO, Karpukhina N, Cao X, Bissasu S, Wilson RM, Cattell MJ. Effect of sandblasting, etching and resin bonding on the flexural strength/bonding of novel glass-ceramics. Dent Mater 2018; 34: 1566-1577.10.1016/j.dental.2018.07.001 ↗
41. 43) Abernethy RB, Breneman JE, Medlin CH, Reinman GL. WEIBULL ANALYSIS HANDBOOK. United Techologies Corporation; 1983, p.18.10.21236/ADA143100 ↗