Bond Durability of Resin Cements to Au-Pd-Ag Alloy under Cyclic Impact Load

The bond durability of resin cements to a 12% Au-Pd-Ag alloy was studied through cyclic impact tests with different loads. A piece of casting alloy was bonded to a cast block with two types of resin cements, Super Bond C&B and Bistite II. A shear load was applied onto a small piece of alloy until debonding of the specimen, using different weights of plungers, 130 g, 230 g, 330 g and 430 g. The specimen bonded with Super Bond exhibited a higher resistance than that with Bistite II. The fracture modes of the debonded cements were completely different from each other. That is, Bistite II showed a bulk fracture of cement by the crack penetrating through the cement layer. On the other hand, Super Bond showed damages limited to the surface and no bulk fracture. The mode of fracture was dependent not on the loading weight but the types of resin cements used.