Role of the functional monomer 10-methacryloyloxydecyl dihydrogen phosphate in dentin bond durability of universal adhesives in etch-&-rinse mode
Source abstract
Abstract
This study aimed to determine the role of the 10-methacryloyloxydecyl dihydrogen phosphate (MDP) in dentin bond durability of universal adhesive in etch-&-rinse mode through bond strength tests after different degradation conditions. This study used the MDP-containing universal adhesive, Clearfil Universal Bond Quick (CU), and an experimental adhesive (NM) made with the same ingredients as CU, excluding MDP. Shear bond strength (SBS) to dentin were obtained in etch-&-rinse mode with or without MDP. CU in self-etch mode was used as a comparison. The groups were divided into three types: 1) subjected to thermal cycling; 2) subjected to long-term water storage; and 3) stored in water for 24 h, as a baseline. The discrepancies in the mean SBS of the CU and NM groups become prominent with prolonged degradation periods. This study indicates that the MDP in universal adhesive might play a key role in enhancing dentin bond quality even when etch-&-rinse mode is used.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Endodontics and Root Canal Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Operative Dentistry, Nihon University School of Dentistry
References (36)
Show source-provided references
1. 1) Van Landuyt KL, Snauwaert J, De Munck J, Peumans M, Yoshida Y, Poitevin A, et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials 2007; 28: 3757-3785.10.1016/j.biomaterials.2007.04.044 ↗
2. 2) Van Meerbeek B, Yoshihara K, Yoshida Y, Mine A, De Munck J, Van Landuyt KL. State of the art of self-etch adhesives. Dent Mater 2011; 27: 17-28.10.1016/j.dental.2010.10.023 ↗
3. 3) Carrilho E, Cardoso M, Ferreira MM, Marto CM, Paula A, Coelho AS. 10-MDP based dental adhesives: adhesive interface characterization and adhesive stability —a systematic review. Materials 2019; 12: E 790-798.10.3390/ma12050790 ↗
4. 4) Yoshida Y, Nagakane K, Fukuda R, Nakayama Y, Okazaki M, Shintani H, et al. Comparative study on adhesive performance of functional monomers. J Dent Res 2004; 83: 454-458.10.1177/154405910408300604 ↗
5. 5) Inoue S, Koshiro K, Yoshida Y, De Munck J, Nagakane K, Suzuki K, et al. Hydrolytic stability of self-etch adhesives bonded to dentin. J Dent Res 2005; 84: 1160-1164.10.1177/154405910508401213 ↗
6. 6) Yoshihara K, Yoshida Y, Nagaoka N, Fukegawa D, Hayakawa S, Mine A, et al. Nano-controlled molecular interaction at adhesive interfaces for hard tissue reconstruction. Acta Biomater 2010; 6: 3573-3782.10.1016/j.actbio.2010.03.024 ↗
7. 7) Yoshida Y, Yoshihara K, Nagaoka N, Hayakawa S, Torii Y, Ogawa T, et al. Self-assembled nano-layering at the adhesive interface. J Dent Res 2012; 91: 376-381.10.1177/0022034512437375 ↗
8. 8) Tsuchiya K, Takamizawa T, Barkmeier WW, Tsubota K, Tsujimoto A, Berry TP, et al. Effect of a functional monomer (MDP) on the enamel bond durability of single-step self-etch adhesives. Eur J Oral Sci 2016; 124: 96-102.10.1111/eos.12232 ↗
9. 9) Nikaido T, Ichikawa C, Li N, Takagaki T, Sadr A, Yoshida Y, et al. Effect of functional monomers in all-in-adhesive systems on formation of enamel/dentin acid-base resistant zone. Dent Mater J 2011; 30: 576-582.10.4012/dmj.2010-214 ↗
10. 10) Matsui N, Takagaki T, Sadr A, Ikeda M, Ichinose S, Nikaido T, et al. The role of MDP in a bonding resin of a two-step self-etching adhesive system. Dent Mater J 2015; 34: 227-233.10.4012/dmj.2014-205 ↗
11. 11) Rosa WL, Piva E, Silva AF. Bond strength of universal adhesives: A systematic review and meta-analysis. J Dent 2015; 43:765-776.10.1016/j.jdent.2015.04.003 ↗
12. 12) Takamizawa T, Barkmeier WW, Tsujimoto A, Berry TP, Watanabe H, Erickson RL, et al. Influence of different etching modes on bond strength and fatigue strength to dentin using universal adhesive systems. Dent Mater 2016; 32: e9-e21.10.1016/j.dental.2015.11.005 ↗
13. 13) Suzuki T, Takamizawa T, Barkmeier WW, Tsujimoto A, Endo H, Erickson RL, et al. Influence of etching mode on enamel bond durability of universal adhesive systems. Oper Dent 2016; 41: 520-530.10.2341/15-347-L ↗
14. 14) Takamizawa T, Barkmeier WW, Tsujimoto A, Scheidel DD, Erickson RL, Latta MA, et al. Effect of phosphoric acid pre-etching on fatigue limits of self-etching adhesives. Oper Dent 2015; 40: 379-395.10.2341/13-252-L ↗
15. 15) Takamizawa T, Barkmeier WW, Tsujimoto A, Suzuki T, Scheidel DD, Erickson RL, et al. Influence of different pre-etching times on fatigue strength of self-etch adhesives to dentin. Eur J Oral Sci 2016; 124: 210-218.10.1111/eos.12253 ↗
16. 16) Jacker-Guhr S, Sander J, Luehrs AK. How “universal “ is adhesion? Shear bond strength of multi-mode adhesives to enamel and dentin. J Adhes Dent 2019; 21: 87-95.
17. 17) Miyazaki M, Onose H, Moore BK. Analysis of the dentin-resin interface by use laser Raman spectroscopy. Dent Mater 2002; 18: 576-580.10.1016/S0109-5641(01)00093-8 ↗
18. 18) Van Landuyt KL, De Munck J, Mine A, Cardoso MV, Peumans M, Van Meerbeek B. Filler debonding & subhybrid-layer failures in self-etch adhesives. J Dent Res 2010; 89: 1045-1050.10.1177/0022034510375285 ↗
19. 19) Hashimoto M, Nagano F, Endo K, Ohno H. A review: Biodegradation of resin-dentin bonds. Jpn Dent Sci Rev 2011; 47: 5-12.10.1016/j.jdsr.2010.02.001 ↗
20. 20) Carvalho RM, Manso AP, Geraldeli S, Tay FR, Pashley DH. Durability of bonds and clinical success of adhesive restorations. Dent Mater 2012; 28: 72-86.10.1016/j.dental.2011.09.011 ↗
21. 21) ISO 29022: 2013 Dentistry-Adhesion-Notched-edge shear bond strength test. 1st edn. Geneva, Switzerland: International Organization for Standardization. ISO (2013) 1-12.
22. 22) Takamizawa T, Barkmeier WW, Tsujimoto A, Endo H, Tsuchiya K, Erickson RL, et al. Influence of pre-etching times on fatigue strength of self-etch adhesives to enamel. J Adhes Dent 2016; 18: 501-511.
23. 23) De Munck J, Van Landuyt K, Peumans M, Poitevin A, Lambrechts P, Braem M, et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res 2005; 84: 118-132.10.1177/154405910508400204 ↗
24. 24) Peumans M, De Munck J, Mine A, Van Meerbeek B. Clinical effectiveness of contemporary adhesives for the restorations of non-carious cervical lesions. A systematic review. Dent Mater 2014; 30: 1089-1103.10.1016/j.dental.2014.07.007 ↗
25. 25) Takamizawa T, Barkmeier WW, Tsujimoto A, Scheidel DD, Watanabe H, Erickson RL, et al. Influence of water storage on fatigue strength of self-etch adhesives. J Dent 2015; 43: 1416-1427.10.1016/j.jdent.2015.10.018 ↗
26. 26) Suzuki S, Takamiazawa T, Imai A, Tsujimoto A, Sai K, Takimoto M, et al. Bond durability of universal adhesive to bovine enamel using self-etch mode. Clin Oral Investig 2018; 22: 1113-1122.10.1007/s00784-017-2196-x ↗
27. 27) Pashley DH, Tay FR, Yiu C, Hashimoto M, Breschi L, Carvalho RM, et al. Collagen degradation by host-derived enzymes during aging. J Dent Res 2004; 83: 216-221.10.1177/154405910408300306 ↗
28. 28) De Munck J, Van den Steen PE, Mine A, Van Landuyt KL, Poitevin A, Opdebakker G. Inhibition of enzymatic degradation of adhesive-dentin interfaces. J Dent Res 2009; 88: 1101-1106.10.1177/0022034509346952 ↗
29. 30) Sai K, Shimamura Y, Takamizawa T, Tsujimoto A, Imai A, Endo H, et al. Influence of degradation conditions on dentin bonding durability of three universal adhesives. J Dent 2016; 54: 56-61.10.1016/j.jdent.2016.09.004 ↗
30. 31) Saikaew P, Chowdhury AF, Fukuyama M, Kakuda S, Carvalho RM, Sano H. The effect of dentine surface preparation and reduced application time of adhesive on bonding strength. J Dent 2016; 47: 63-70.10.1016/j.jdent.2016.02.001 ↗
31. 32) Saikaew P, Matsumoto M, Chowdhury A, Carvalho RM, Sano H.Does shortened application time affect long-term bond strength of universal adhesives to dentin? Oper Dent 2018; 43: 549-58.10.2341/17-205-L ↗
32. 33) Sai K, Takamizawa T, Imai A, Tsujimoto A, Ishii R, Barkmeier WW, et al. Influence of application time and etching mode of universal adhesives on enamel adhesion. J Adhes Dent 2018; 20: 65-77.
33. 34) Saito T, Takamizawa T, Ishii R, Tsujimoto A, Hirokane E, Barkmeier WW, et al. Influence of application time on dentin bond performance in different etching modes of universal adhesives. Oper Dent 2020; 45: 183-195.10.2341/19-028-L ↗
34. 35) Yoshihara K, Nagaoka N, Hayakawa S, Okihara T, Yoshida Y, Van Meerbeek B. Chemical interaction of glycero-phosphate dimethacrylate (GPDM) with hydroxyapatite and dentin. Dent Mater 2018; 34: 1072-1081.10.1016/j.dental.2018.04.003 ↗
35. 36) Yoshihara K, Nagaoka N, Okihara T, Kuroboshi M, Hayakawa S, Maruo Y, et al. Functional monomer impurity affects adhesive performance. Dent Mater 2015; 31: 1493-1501.10.1016/j.dental.2015.09.019 ↗
36. 37) Hiraishi N, Tochio N, Kigawa T, Otsuki M, Tagami J. Monomer-collagen interactions studied by saturation transfer difference NMR. J Dent Res 2013; 92: 284-288.10.1177/0022034512474310 ↗