Surface characterization of commercially available yttria-stabilized tetragonal zirconia polycrystalline in water and Hanks’ solution using X-ray photoelectron spectroscopy
Source abstract
Abstract
To elucidate the mechanism of adhesion of soft and hard tissues to yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP), Y-TZP and titanium disks were immersed in ultrapure water and in Hanks' solution, and the changes in the surface compositions and chemical states were characterized using X-ray photoelectron spectroscopy. After immersion in ultrapure water for 60 days, the concentration of hydroxyl groups on the Y-TZP surface increased. In addition, only phosphate ions were incorporated into the surface during immersion in Hanks' solution, while other ions did not react. On the other hand, the surface of Ti was also hydrated in ultrapure water; however, calcium phosphate formed on it during immersion in Hanks' solution. Therefore, the reactivity of Y-TZP with electrolytes was lower than that of Ti. We conclude that the formation of the phosphate on the Y-TZP surface in physiological conditions possibly enhances the adhesion of soft and hard tissues to Y-TZP.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Medical and Dental Science, Tokyo Medical and Dental University
Department of Metallic Biomaterials, Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University
References (30)
Show source-provided references
1. 1) Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008; 24: 299-307.10.1016/j.dental.2007.05.007 ↗
2. 2) Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T.Current status of zirconia restoration. J Prosthodont Res 2013; 57: 236-261.10.1016/j.jpor.2013.09.001 ↗
3. 3) Hulbert SF. The use of alumina and zirconia in surgical implants. In: Hench LL, editor. An introduction to bioceramics. Singapore: World Scientific; 1993. p 27-48.10.1142/9789814317351_0002 ↗
4. 4) Inokoshi M, Minakuchi S. Bond strategy for zirconia ceramics. J J Dent Mater 2016; 35: 265-268.
5. 5) Payer M, Arnetzl V, Kirmeier R, Koller M, Arnetzl G, Jakse N.Immediate provisional restoration of single-piece zirconia implants: a prospective case series —results after 24 months of clinical function. Clin Oral Implants Res 2013; 24: 569-575.10.1111/j.1600-0501.2012.02425.x ↗
6. 6) Becker K, Mihatovic I, Golubovic V, Schwarz F. Impact of abutment material and dis-/re-connection on soft and hard tissue changes at implants with platform-switching. J Clin Periodontol 2012; 39: 774-780.10.1111/j.1600-051X.2012.01911.x ↗
7. 7) Kajiwara N, Masaki C, Mukaido T, Kondo Y, Nakamoto T, Hosokawa R. Soft tissue biological response to zirconia and metal implant abutments compared with natural tooth: microcirculation monitoring as a novel bioindicator. Implant Dent 2015; 24: 37-41.
8. 8) Albrektsson T, Hansson HA, Ivarsson B, Interface analysis of titanium and zirconium bone implants. Biomaterials 1985; 6: 97-101.10.1016/0142-9612(85)90070-5 ↗
9. 9) Tanaka Y, Saito H, Tsutsumi Y, Doi H, Imai H, Hanawa T. Active hydroxyl groups on surface oxide film of titanium, 316L stainless steel, and cobalt-chromium-molybdenum alloy and its effect on the immobilization of poly(ethylene glycol). Mater Trans JIM 2008; 49: 805-811.10.2320/matertrans.MRA2007317 ↗
10. 10) Oishi M, Tsutsumi Y, Chen P, Ashida M, Doi H, Hanawa T. Surface changes of yttria-stabilized zirconia in water and Hanks solution characterized using XPS. Surf Interface Anal 2018; 50: 587-591.10.1002/sia.6435 ↗
11. 11) Hanawa T, Ota M, Calcium phosphate naturally formed on titanium in electrolyte solution. Biomaterials 1991; 12: 767-774.10.1016/0142-9612(91)90028-9 ↗
12. 12) Asami K. A precisely consistent energy calibration method for X-ray photoelectron spectroscopy. J Electron Spectrosc and Related Phenomena 1976; 9: 469-478.10.1016/0368-2048(76)80065-5 ↗
13. 13) Shirley DA. High-resolution X-ray photoemission spectrum of the valence bands of gold. Phys Rev B 1972; 5: 4709.10.1103/PhysRevB.5.4709 ↗
14. 14) Asami K, Hashimoto K, Shimodaira S. XPS determination of compositions of alloy surfaces and surface oxides on mechanically polished iron-chromium alloys. Corros Sci 1977; 17: 713-723.10.1016/0010-938X(77)90067-1 ↗
15. 15) Asami K, Hashimoto K. An XPS study of the surfaces on Fe-Cr, Fe-Co and Fe-Ni alloys after mechanical polishing. Corros Sci 1984; 24: 83-97.10.1016/0010-938X(84)90039-8 ↗
16. 16) Asami K, Chen SC, Habazaki H, Kawashima A, Hashimoto K.A photoelectrochemical and ESCA study of passivity of amorphous nickel-valve metal alloys. Corros Sci 1990; 31: 727-732.10.1016/0010-938X(90)90188-B ↗
17. 17) Asami K, De Sá MS, Ashworth V. Proceedings of the 6th European Symposium on Corrosion Inhibitors (6 SEICC) Ferrara, Italy, 1985. p. 769-778.
18. 18) Hashimoto K, Kasaya M, Asami K, Masumoto T. Electrochemical and XPS studies on corrosion behavior of amorphous Ni-Cr-P-B alloys. Corros Eng 1977; 26: 445-452.10.3323/jcorr1974.26.8_445 ↗
19. 19) Scofield JH. Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV. J Electron Spectrosc 1976; 8: 129-137.10.1016/0368-2048(76)80015-1 ↗
20. 20) Hanawa T, Ota M. Characterization of surface film formed on titanium in electrolyte using XPS. Appl Surf Sci 1992; 55: 269-276.10.1016/0169-4332(92)90178-Z ↗
21. 21) Legeros RZ, Legeros JP. Dense hydroxyapatite. In: Hench LL, editor. An introduction to bioceramics. Singapore: World Scientific; 1993, p. 145.10.1142/9789814317351_0009 ↗
22. 22) Hiromoto S, Hanawa T, Asami K. Composition of surface oxide film of titanium with culturing murine fibroblasts L929. Biomaterials 2004; 25: 979-986.10.1016/S0142-9612(03)00620-3 ↗
23. 23) Fischer DW. X-Ray band spectra and molecular-orbital structure of rutile TiO2. Phys Rev B Solid State 1972; 5: 4219-4226.10.1103/PhysRevB.5.4219 ↗
24. 24) Tsutsumi Y, Nishimura D, Doi H, Nomura N, Hanawa T.Difference in surface reactions between titanium and zirconium in Hanks’ solution to elucidate mechanism of calcium phosphate formation on titanium using XPS and cathodic polarization. Mater Sci Eng C 2009; 29: 1702-1708.10.1016/j.msec.2009.01.016 ↗
25. 25) Majumdar D, Chatterjee D. Application of X-ray photoelectron spectroscopy valence bands in studying ceramic surfaces and interfaces. Thin Solid Films 1993; 236: 164-168.10.1016/0040-6090(93)90663-A ↗
26. 26) Morinaga M, Adachi H, Tsukada M. Electronic structure and phase stability of ZrO2. J Phys Chem Solids 1983; 44: 301-306.10.1016/0022-3697(83)90098-7 ↗
27. 27) Soriano L. The electronic structure of ZrO2: Band structure calculations compared to electron and x-ray spectra. Solid State Commun 1995; 93: 659-665.10.1016/0038-1098(94)00882-5 ↗
28. 28) Chevalier J, Drouin JM, Cales JM. Low temperature ageing behaviour of zirconia hip joint heads. Bioceramics 1997; 10: 135-138.
29. 29) Morant C, Sanz JM, Galán L. Ar-ion bombardment effects on ZrO2 surfaces. Phys Rev B 1992; 45: 1391-1398.10.1103/PhysRevB.45.1391 ↗
30. 30) Bae JS, Park SS, Mun BS, Park SH, Hwang ES, Kim J, Huh J, Park HJ, Kim JS, Yun HJ, Kim HG, Jeong SY, Hwang J, Park S. Surface modification of yttria-stabilized-zirconia thin films under various oxygen partial pressures. Thin Solid Films 2012; 520: 5826-5831.10.1016/j.tsf.2012.02.049 ↗