Corrosion behavior of Zr-14Nb-5Ta-1Mo alloy in simulated body fluid
Source abstract
Abstract
Metals that are used to reconstruct skeletal structures often interfere with magnetic resonance imaging (MRI) owing to differences in magnetic susceptibility; consequently, metals with lower magnetic susceptibilities need to be developed for use in implant devices. Herein, we investigated the corrosion properties of the Zr-14Nb-5Ta-1Mo alloy, which exhibits low magnetic susceptibility and excellent mechanical properties. The pitting potential of Zr-14Nb-5Ta-1Mo was higher than that of pure Zr. The passive current density of Zr-14Nb-5Ta-1Mo also higher than that of pure Zr, which is ascribable to slow reconstruction of the initial passive film associated with the presence of Nb and Ta. XPS revealed that the passive film is enriched with Nb and Ta. Therefore, while the Zr-14Nb-5Ta-1Mo alloy exhibited a high initial passive current density in simulated body fluid, it formed a stable passive film that suppressed localized corrosion. Zr-14Nb-5Ta-1Mo is therefore a prospective implant-material alloy candidate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Aluminium Research Center, University of Toyama
Research Center for Structural Materials, National Institute for Materials Science
Faculty of Science and Technology, Seikei University
Graduate School of Dentistry, Tohoku University
Tokyo Medical and Dental University
Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
Department of Medical Device Engineering, Graduate School of Medicine, Kobe University
References (48)
Show source-provided references
1. 1) Hanawa T. Titanium-tissue interface reaction and its control with surface treatment. Front Bioeng Biotechnol 2019; 7: 170.10.3389/fbioe.2019.00170 ↗
2. 2) Kaur M, Singh K. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications. Mater Sci Eng C 2019; 102: 844-862.10.1016/j.msec.2019.04.064 ↗
3. 3) Imai H, Tanaka Y, Nomura N, Tsutsumi Y, Doi H, Kanno Z, et al. Three-dimensional quantification of susceptibility artifacts from various metals in magnetic resonance images. Acta Biomater 2013; 9: 8433-8439.10.1016/j.actbio.2013.05.017 ↗
4. 4) Elison JM, Leggitt VL, Thomson M, Oyoyo U, Wycliffee ND. Influence of common orthodontic appliances on the diagnostic quality of cranial magnetic resonance images. Am J Orthod Dentofacial Orthop 2008; 134: 563-572.10.1016/j.ajodo.2006.10.038 ↗
5. 5) Kawabata I, Imai H, Kanno Z, Tetsumura A, Tsutsumi Y, Doi H, et al. Three-dimensional quantification of magnetic resonance imaging artifacts associated with shape factors. Dent Mater J 2019; 38: 638-645.10.4012/dmj.2018-197 ↗
6. 6) Imai H, Tanaka Y, Nomura N, Doi H, Tsutsumi Y, Ono T, et al. Magnetic susceptibility, artifact volume in MRI, and tensile properties of swaged Zr-Ag composites for biomedical applications. J Mech Behav Biomed Mater 2017; 66: 152-158.10.1016/j.jmbbm.2016.11.011 ↗
7. 7) Kondo R, Nomura N, Tsutsumi Y, Doi H, Hanawa T. Microstructure and mechanical properties of as-cast Zr-Nb alloys. Acta Biomater 2011; 7: 4278-4284.10.1016/j.actbio.2011.07.020 ↗
8. 8) Nomura N, Tanaka Y, Kondo R, Doi H, Tsutsumi Y, Hanawa T.Effects of phase constitution of Zr-Nb alloys on their magnetic susceptibilities. Mater Trans 2009; 50: 2466-2472.10.2320/matertrans.M2009187 ↗
9. 9) Nomura N, Oya K, Tanaka Y, Kondo R, Doi H, Tsutsumi Y, et al. Microstructure and magnetic susceptibility of as-cast Zr-Mo alloys, Acta Biomater 2010; 6: 1033-1038.10.1016/j.actbio.2009.09.013 ↗
10. 10) Ashida M, Sugimoto T, Nomura N, Tsutsumi Y, Chen P, Doi H, et al. Microstructure and mechanical properties of large-scale ingots of the Zr-1Mo alloy. Mater Trans 2015; 56: 1544-1548.10.2320/matertrans.M2015098 ↗
11. 11) Tsutsumi Y, Nishisaka T, Doi H, Ashida M, Chen P, Hanawa T.Reaction of calcium and phosphate ions with titanium, zirconium, niobium, and tantalum. Surf Interface Anal 2015; 47: 1148-1154.10.1002/sia.5866 ↗
12. 12) Ashida M, Tsutsumi Y, Homma K, Chen P, Shimojo M, Hanawa T. Design of zirconium quaternary system alloys and their properties. Mater Trans 2020; 61: 776-781.10.2320/matertrans.MT-M2019315 ↗
13. 13) Hanawa T. Metals and medicine. Mater Trans 2021; 62: 139-148.10.2320/matertrans.MT-M2020268 ↗
14. 14) Sato H, Chen P, Ashida M, Tsutsumi Y, Harada H, Hanawa T.Evaluation of cytocompatibility and osteoconductivity of Zr-14Nb-5Ta-1Mo alloy with MC3T3-E1 cells. Dent Mater J 2022; 41: 421-428.10.4012/dmj.2021-169 ↗
15. 15) Manaka T, Tsutsumi Y, Ashida M, Chen P, Katayama H, Hanawa T. Development of electrochemical surface treatment for improvement of localized corrosion resistance of zirconium in chloride environment. Mater Trans 2021; 62: 788-796.10.2320/matertrans.C-M2021817 ↗
16. 16) Manaka T, Tsutsumi Y, Takada Y, Chen P, Ashida M, Doi K, et al. Galvanic corrosion among Ti-6Al-4V ELI Alloy, Co-Cr-Mo Alloy, 316L-Type stainless steel, and Zr-1Mo Alloy for orthopedic implants. Mater Trans 2023; 64: 131-137.10.2320/matertrans.MT-MLA2022001 ↗
17. 17) Manaka T, Tsutsumi Y, Chen P, Ashida M, Katayama H, Hanawa T. Development of electrochemical surface treatment to visualize critical corrosion-inducing inclusions of Zr in chloride environments. J Electrochem Soc 2021; 168: 121505.10.1149/1945-7111/ac3ff1 ↗
18. 18) Tsutsumi Y, Muto I, Nakano S, Tsukada J, Manaka T, Chen P, et al. Effect of impurity elements on localized corrosion of zirconium in chloride containing environment. J Electrochem Soc 2020; 167: 141507.10.1149/1945-7111/abc5d8 ↗
19. 19) Tanaka Y, Kobayashi E, Hiromoto S, Asami K, Imai H, Hanawa T. Calcium phosphate formation on titanium by low-voltage electrolytic treatments. J Mater Sci Mater Med 2007; 18: 797-806.10.1007/s10856-006-0004-2 ↗
20. 20) Végh J. The Shirley background revised. J Electron Spectrosc Relat Phenom 2006; 151: 159-164.10.1016/j.elspec.2005.12.002 ↗
21. 21) Asami K, Hashimoto K. An XPS study of the surfaces on Fe-Cr, Fe-Co and Fe-Ni alloys after mechanical polishing. Corrosion Sci 1984; 24: 83-97.10.1016/0010-938X(84)90039-8 ↗
22. 22) Asami K, Hashimoto K, Shimodaira S. XPS determination of compositions of alloy surfaces and surface oxides on mechanically polished iron-chromium alloys. Corrosion Sci 1977; 17: 713-723.10.1016/0010-938X(77)90067-1 ↗
23. 23) Scofield JH. Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV. J Electron Spectrosc Relat Phenom 1976; 8: 129-137.10.1016/0368-2048(76)80015-1 ↗
24. 24) Reddy BM, Sreekanth PM, Yamada Y, Xu X, Kobayashi T. Surface characterization of sulfate, molybdate, and tungstate promoted TiO2-ZrO2 solid acid catalysts by XPS and other techniques. Appl Catal A 2002; 228: 269-278.10.1016/S0926-860X(01)00982-6 ↗
25. 25) Reddy BM, Chowdhury B, Reddy EP, Fernández A. Characterization of MoO3/TiO2-ZrO2 catalysts by XPS and other techniques. J Mol Catal A Chem 2000; 162: 431-441.10.1016/S1381-1169(00)00336-8 ↗
26. 26) Petrik P, Sulyok A, Novotny T, Perez-Feró E, Kalas B, Agocs E, et al. Optical properties of Zr and ZrO2. Appl Surf Sci 2017; 421: 744-747.10.1016/j.apsusc.2016.11.072 ↗
27. 27) Song Z, Bao X, Wild U, Muhler M, Ertl G. Oxidation of amorphous Ni-Zr alloys studied by XPS, UPS, ISS and XRD. Appl Surf Sci 1998; 134: 31-38.10.1016/S0169-4332(98)00249-9 ↗
28. 28) Reddy BM, Chowdhury B, Ganesh I, Reddy EP, Rojas TC, Fernández A. Characterization of V2O5/TiO2-ZrO2 catalysts by XPS and other techniques. J Phys Chem B 1998; 102: 10176-10182.10.1021/jp9826165 ↗
29. 29) Ge XQ, Wang YG, Shao JQ, Wei W, Zhang B, Wang SH, et al. Testing the activation temperature of non-evaporable Ti-Zr-Hf-V getter films by XPS. Nucl Instr Meth Phys Res A 2020; 967: 163864.10.1016/j.nima.2020.163864 ↗
30. 30) Zhang WB, Wu WD, Wang XM, Cheng XL, Yan DW, Shen CL, et al. The investigation of NbO2 and Nb2O5 electronic structure by XPS, UPS and first principles methods. Surf Interface Anal 2013; 45: 1206-1210.10.1002/sia.5253 ↗
31. 31) Milosev I, Kosec T, Strehblow HH. XPS and EIS study of the passive film formed on orthopaedic Ti-6Al-7Nb alloy in Hank’s physiological solution. Electrochim Acta 2008; 53: 3547-3558.10.1016/j.electacta.2007.12.041 ↗
32. 32) Hryniewicz T, Rokosz K, Sandim HRZ. SEM/EDX and XPS studies of niobium after electropolishing. Appl Surf Sci 2012; 263: 357-361.10.1016/j.apsusc.2012.09.060 ↗
33. 33) Alov NV. Surface oxidation of metals by oxygen ion bombardment, Nucl Instr Meth Phys Res B 2007; 256: 337-340.10.1016/j.nimb.2006.12.023 ↗
34. 34) Lu Y, Le Breton JC, Turban P, Lépine B, Schieffer P, Jézéquel G.Band structure of the epitaxial Fe/MgO/GaAs(001) tunnel junction studied by X-ray and ultraviolet photoelectron spectroscopies. Appl Phys Lett 2006; 89: 152106.10.1063/1.2361273 ↗
35. 35) Veal BW, Lam DJ, Westlake DG. X-ray photoemission spectroscopy study of zirconium hydride. Phys Rev B 1979; 19: 2856-2863.10.1103/PhysRevB.19.2856 ↗
36. 36) Magnuson M, Schmidt S, Hultman L, Högberg H. Electronic properties and bonding in ZrHx thin films investigated by valence-band X-ray photoelectron spectroscopy. Phys Rev B 2017; 96: 195103.10.1103/PhysRevB.96.195103 ↗
37. 37) Khanuja M, Sharma H, Mehta BR, Shivaprasad SM. XPS depth-profile of the suboxide distribution at the native oxide/Ta interface. J Electron Spectrosc Relat Phenom 2009; 169: 41-45.10.1016/j.elspec.2008.10.004 ↗
38. 38) Kerrec O, Devilliers D, Groult H, Marcus P. Study of dry and electrogenerated Ta2O5 and Ta/Ta2O5/Pt structures by XPS. Mater Sci Eng B 1998; 55: 134-142.10.1016/S0921-5107(98)00177-9 ↗
39. 39) Zier M, Oswald S, Reiche R, Kozlowska M, Wetzig K. Interface formation and reactions at Ta-Si and Ta-SiO2 interfaces studied by XPS and ARXPS. J Electron Spectrosc Relat Phenom 2004; 137: 229-233.10.1016/j.elspec.2004.02.060 ↗
40. 40) Medicherla VRR, Majumder S, Paramanik D, Varma S. Formation of self-organized Ta nano-structures by argon ion sputtering of Ta foil: XPS and AFM study. J Electron Spectrosc Relat Phenom 2010; 180: 1-5.10.1016/j.elspec.2010.02.006 ↗
41. 41) Moo JGS, Awaludin Z, Okajima T, Ohsaka T. An XPS depth-profile study on electrochemically deposited TaOx. J Solid State Electrochem 2013; 17: 3115-3123.10.1007/s10008-013-2216-y ↗
42. 42) Samuel S, Nag S, Nasrazadani S, Ukirde V, El Bouanani M, Mohandas A, et al. Corrosion resistance and in vitro response of laser-deposited Ti-Nb-Zr-Ta alloys for orthopedic implant applications. J Biomed Mater Res A 2010; 94A: 1251-1256.10.1002/jbm.a.32782 ↗
43. 43) Brunckova H, Kanuchova M, Kolev H, Mudra E, Medvecky L.XPS characterization of SmNbO4 and SmTaO4 precursors prepared by sol-gel method. Appl Surf Sci 2019; 473: 1-5.10.1016/j.apsusc.2018.12.143 ↗
44. 44) Rokosz K, Hryniewicz T, Chapon P, Raaen S, Sandim HRZ. XPS and GDOES characterization of porous coating enriched with copper and calcium obtained on tantalum via plasma electrolytic oxidation. J Spectrosc 2016; 2016: 7093071.10.1155/2016/7093071 ↗
45. 45) Choi JG, Thompson LT. XPS study of as-prepared and reduced molybdenum oxides. Appl Surf Sci 1996; 93: 143-149.10.1016/0169-4332(95)00317-7 ↗
46. 46) Delporte P, Meunier F, Phamhuu C, Vennegues P, Ledoux MJ, Guille J. Physical characterization of molybdenum oxycarbide catalyst; TEM, XRD and XPS. Catal Today 1995; 23: 251-267.10.1016/0920-5861(94)00166-Y ↗
47. 47) Hanawa T, Hiromoto S, Asami K. Characterization of the surface oxide film of a Co-Cr-Mo alloy after being located in quasi-biological environments using XPS. Appl Surf Sci 2001; 183: 68-75.10.1016/S0169-4332(01)00551-7 ↗
48. 48) Tsutsumi Y, Bártákova S, Prachár P, Migita S, Doi H, Nomura N, et al. Long-term corrosion behavior of biocompatible beta-type Ti alloy in simulated body fluid. J Electrochem Soc 2012; 159: C435-C440.10.1149/2.045210jes ↗