Interface-dominant multilayers fabricated by severe plastic deformation: Stability under extreme conditions
Source abstract
Abstract
Abstract Over the past 3–5 years, the ability to process interface dominant nanolayered bimetallic composites in bulk quantities has opened new opportunities for investigations into structural material behavior under extreme strains. This article reviews the emergence of mechanically stable, predominant bimetallic interface characters during nanomaterial synthesis via Accumulative Roll Bonding, a severe plastic deformation technique. This processing method itself imposes an extreme condition. We show that the interfaces that are naturally selected by this extreme operation remarkably prove to be stable under exposure to other extreme conditions, including elevated temperatures and ion irradiation. Through control of synthesis pathways, interfaces of the desired atomic structure can be manufactured using scalable thermomechanical processing techniques. This, in turn, opens unprecedented new possibilities for designing bulk materials with interface-dominant properties including enhanced strength, deformability, thermal stability, and radiation damage tolerance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (96)
Show source-provided references
1. Texture evolution in equal-channel angular extrusion10.1016/j.pmatsci.2009.01.001 ↗
2. Introduction to texture analysis: macrotexture microtexture and orientation mapping
3. Kocks UF, Tome CN, Wenk H-R. Texture and anisotropy: preferred orientations in polycrystals and their effect on materials properties. In: Kocks UF, Tome CN, Wenk H-R, editors. with additional contributions by A.J. Beaudoin .. et al. and with an introduction by H. Mecking. Preferred orientations in polycrystals and their effect on materials properties. Cambridge University Press; 1998. p. 676.
4. Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models10.1016/j.cma.2014.05.003 ↗
5. On the role of non-equilibrium grain-boundary structure in the yield and flow stress of polycrystals10.1080/01418619408244347 ↗
6. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
7. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
8. Unraveling the nature of room temperature grain growth in nanocrystalline materials10.1016/j.actamat.2008.04.051 ↗
9. Grain growth in nanocrystalline iron prepared by mechanical attrition10.1016/S1359-6454(96)00300-X ↗
10. Design of radiation tolerant materials via interface engineering10.1002/adma.201303400 ↗
11. Enhanced tensile strength for electrodeposited nickel–copper multilayer composites10.1007/BF02646838 ↗
12. Determination of the interfacial tension by zero creep experiments on multilayers. I. Theory10.1016/0956-7151(93)90115-9 ↗
13. Determination of the interfacial tension by zero creep experiments on multilayers. II. Experiment10.1016/0956-7151(93)90116-A ↗
14. Tensile testing low density multilayers: aluminum/titanium10.1557/JMR.1998.0397 ↗
15. Structure and mechanical properties of Cu–X (X=Nb, Cr, Ni) nanolayered composites10.1016/S1359-6462(98)00196-1 ↗
16. Dislocation-based deformation mechanisms in metallic nanolaminates10.1557/S0883769400051514 ↗
17. Deformability of ultrahigh strength 5nm Cu/Nb nanolayered composites10.1063/1.2938921 ↗
18. Tensile behavior of 40nm Cu/Nb nanoscale multilayers10.1016/j.scriptamat.2008.01.005 ↗
19. Radiation damage tolerant nanomaterials10.1016/j.mattod.2013.10.019 ↗
20. Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu/Nb multilayers fabricated by severe plastic deformation10.1557/jmr.2013.21 ↗
21. The suppression of instabilities via biphase interfaces during bulk fabrication of nanograined Zr
22. Formation of nanoscale Fe/Ag multilayer by repeated press-rolling and its layer thickness dependence of magnetoresistance10.1016/S0921-5093(00)00680-8 ↗
23. Processing and deformation behavior of bulk Cu–Nb nanolaminates10.1007/s13632-014-0172-2 ↗
24. Texture evolution in two-phase Zr/Nb lamellar composites during accumulative roll bonding10.1016/j.ijplas.2014.01.008 ↗
25. Review: effect of bimetal interface structure on the mechanical behavior of Cu–Nb fcc–bcc nanolayered composites10.1007/s10853-014-8342-9 ↗
26. High-strength and high-conductive Cu/Ag multilayer produced by ARB10.1016/j.jallcom.2010.06.172 ↗
27. Evolution of microstructure for multilayered Al/Ni composites by accumulative roll bonding process10.1016/j.matlet.2006.03.001 ↗
28. Metallography of a modern pattern-welded steel knife blade
29. Materials: carbon nanotubes in an ancient damascus sabre10.1038/444286a ↗
30. Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu–Nb multilayers fabricated by severe plastic deformation10.1557/jmr.2013.21 ↗
31. Influence of slip and twinning on the crystallographic stability of bimetal interfaces in nanocomposites under deformation10.1016/j.actamat.2014.03.041 ↗
32. Thermal stability of Cu–Nb nanolamellar composites fabricated via accumulative roll bonding10.1080/14786435.2012.731527 ↗
33. Engineering interface structures and thermal stabilities via SPD processing in bulk nanostructured metals10.1038/srep04226 ↗
34. Enhanced plasticity via kinking in cubic metallic nanolaminates
35. A wedge-mounting technique for nanoscale electron backscatter diffraction10.1063/1.4794388 ↗
36. The heterophase interface character distribution of physical vapor-deposited and accumulative roll-bonded Cu–Nb multilayer composites10.1016/j.actamat.2011.12.007 ↗
37. Modeling of rolling texture development in a ferritic chromium steel10.1007/s11661-997-0191-6 ↗
38. Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding10.1016/j.actamat.2007.11.017 ↗
39. Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures10.1016/j.ijplas.2010.08.009 ↗
40. Anomalous deformation twinning in coarse-grained Cu in Ag60Cu40 composites under high strain-rate compressive loading10.1016/j.msea.2014.08.082 ↗
41. Dislocation interactions with grain boundaries10.1016/j.cossms.2014.05.004 ↗
42. Quasi-static and dynamic compressive deformation of a bulk nanolayered Ag–Cu eutectic alloy: macroscopic response and dominant deformation mechanisms10.1016/j.msea.2013.11.061 ↗
43. Conductor materials for high field magnets10.1016/S1359-0286(98)80106-X ↗
44. Lecouturier F, Spencer K, Embury L, Thilly JD. Perspectives for Cu/SS macrocomposite and Cu/X nanofilamentary conductors used in non-destructive high-field pulsed magnets under cryogenic conditions; 2004. p. 582–8.10.1016/j.physb.2004.01.086 ↗
45. Ferrite: cementite crystallography in pearlite10.1007/BF02665057 ↗
46. Overview no. 76. Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals-I. Description of rolling texture development in homogeneous CuZn alloys10.1016/0001-6160(88)90172-1 ↗
47. Processing parameter influence on texture and microstructural evolution in Cu–Nb multilayer composites fabricated via accumulative roll bonding10.1007/s11661-013-2162-4 ↗
48. On the correlation of microstructure and electromagnetic properties of heavily cold worked Cu-20wt% Nb wires10.1016/0956-7151(94)00378-U ↗
49. Rolling textures of a Cu/20%Nb composite10.1016/0956-716X(92)90115-U ↗
50. Textures of rolled and wire drawn Cu-20%Nb10.4028/www.scientific.net/MSF.157-162.709 ↗
51. Investigation of a Cu-20 mass-percent nb in-situ composite: 1. Fabrication, Microstructure, and Mechanical Properties
52. Bulk texture evolution of Cu–Nb nanolamellar composites during accumulative roll bonding10.1016/j.actamat.2011.11.045 ↗
53. EBSD study of grain subdivision of a Goss grain in coarse-grained cold-rolled niobium10.1016/j.scriptamat.2005.03.045 ↗
54. Equal channel angular extrusion of niobium single crystals10.1016/j.msea.2007.02.086 ↗
55. Simulation of shear banding in heterophase co-deformation: example of plane strain compressed Cu–Ag and Cu–Nb metal matrix composites10.1016/j.actamat.2013.04.029 ↗
56. Effects of elevated temperature annealing on the structure and hardness of copper/niobium nanolayered films10.1557/JMR.2005.0250 ↗
57. Design of a novel Mn-based 1GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability10.1016/j.actamat.2011.04.011 ↗
58. Interfacial structure and growth mechanisms of lath-shaped precipitates in Ni–45wt% Cr10.1080/01418619808241911 ↗
59. Structure, shear resistance and interaction with point defects of interfaces in Cu–Nb nanocomposites synthesized by severe plastic deformation10.1016/j.actamat.2011.09.004 ↗
60. Solid state amorphization in cold drawn Cu/Nb wires10.1016/S1359-6454(00)00338-4 ↗
61. A comparison of texture results obtained using precession electron diffraction and neutron diffraction methods at diminishing length scales in ordered bimetallic nanolamellar composites10.1016/j.scriptamat.2012.05.018 ↗
62. Microstructural evolution of nanolayered Cu–Nb composites subjected to high-pressure torsion10.1016/j.actamat.2014.03.040 ↗
63. Transmission electron microscopy investigation of the atomic structure of interfaces in nanoscale Cu–Nb multilayers10.1080/14786430802380485 ↗
64. Huang X. et al. Evolution of microstructural morphology and boundary spacing during high pressure torsion of nickel. In: Zhu YT. et al., editors, Ultrafine grained materials III; 2004. p. 235–40.
65. Mechanisms for initial grain refinement in OFHC copper during equal channel angular pressing10.1016/j.actamat.2006.08.049 ↗
66. Interface-driven plasticity: the presence of an interface affected zone in metallic lamellar composites
67. Atomic structure variations of mechanically stable fcc–bcc interfaces10.1063/1.3693015 ↗
68. Structure and property of interfaces in ARB Cu/Nb laminated composites10.1007/s11837-012-0429-7 ↗
69. Minimum energy structures of faceted, incoherent interfaces10.1063/1.4755789 ↗
70. Interface dislocation patterns and dislocation nucleation in face-centered-cubic and body-centered-cubic bicrystal interfaces10.1016/j.ijplas.2013.07.002 ↗
71. Emergence of stable interfaces under extreme plastic deformation10.1073/pnas.1319436111 ↗
72. A crystal plasticity study of heterophase interface character stability of Cu/Nb bicrystals10.1016/j.ijplas.2013.02.006 ↗
73. High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces10.1038/ncomms2651 ↗
74. The critical role of grain orientation and applied stress in nanoscale twinning
75. Deformation twinning in nanocrystalline materials10.1016/j.pmatsci.2011.05.001 ↗
76. Growth twins and deformation twins in metals10.1146/annurev-matsci-070813-113304 ↗
77. Unprecedented grain size effect on stacking fault width10.1063/1.4820427 ↗
78. Predictions of an alternative pathway for grain-boundary driven twinning10.1063/1.4883396 ↗
79. Twinnability of bimetal interfaces in nanostructured composites10.1080/21663831.2013.782074 ↗
80. Thermal stability of sputtered Cu films with nanoscale growth twins10.1063/1.2913322 ↗
81. Mechanical behavior and thermal stability of nanocrystalline copper film prepared by gas deposition method10.1016/S1359-6462(01)00834-X ↗
82. Thermal stability and strength of Mo/Pt multilayered films10.1007/s10853-009-3943-4 ↗
83. Thermo-mechanical stability of metallic nanolaminates
84. Thermal stability of self-supported nanolayered Cu/Nb films10.1080/14786430310001659480 ↗
85. An interface facet driven Rayleigh instability in high-aspect-ratio bimetallic nanolayered composites10.1063/1.4895560 ↗
86. Surfaces, interfaces, and changing shapes in multilayered films10.1557/S0883769400051538 ↗
87. Stability in thin film multilayers and microlaminates: the role of free energy, structure, and orientation at interfaces and grain boundaries10.1016/S1359-6462(02)00629-2 ↗
88. Slip transfer across grain and phase boundaries10.1016/0956-7151(90)90159-E ↗
89. Recent developments in irradiation-resistant steels10.1146/annurev.matsci.38.060407.130315 ↗
90. Irradiation-tolerant nanostructured ferritic alloys: transforming helium from a liability to an asset10.1007/s11837-010-0144-1 ↗
91. High-temperature mechanical behavior/microstructure correlation of Cu/Nb nanoscale multilayers10.1016/j.msea.2007.08.089 ↗
92. The effects of decreasing layer thickness on the high temperature mechanical behavior of Cu/Nb nanoscale multilayers10.1016/j.tsf.2006.01.036 ↗
93. Layer stability and material properties of friction-stir welded Cu–Nb nanolamellar composite plates10.1080/21663831.2014.918567 ↗
94. Influence of grain boundaries on mechanical properties10.1007/BF02661312 ↗
95. Role of interface structure on the plastic response of Cu/Nb nanolaminates under shock compression: non-equilibrium molecular dynamics simulations
96. Incorporating interface affected zones into crystal plasticity10.1016/j.ijplas.2014.08.013 ↗