journal article·2017-10Open access

Fundamental deformation behavior in high-entropy alloys: An overview

H.Y. Diao, R. Feng, K.A. Dahmen, P.K. Liaw

Abstract

Abstract High-entropy alloys (HEAs), as a new class of materials, are nearly equiatomic and multi-element systems, which can crystallize as a single phase or multi-phases. Most of the HEAs described in the literature contain multiple phases (secondary phases, nanoparticles, and so on), rather than a single solid-solution phase. Thus, it is essential to review the typical mechanical properties of both single-phase and multiphase HEAs thoroughly, with emphases on (1) the fundamental physical mechanisms and (2) the difference from conventional alloys. In this paper, mainly based on different mechanical properties, HEAs are classified into four types for the first time, i.e., (a) HEA alloy systems of 3d-transition metals only (Type 1), (b) HEA alloy systems of transition metals with larger atomic-radius elements (Type 2), (c) HEA alloy systems of refractory metals (Type 3), and (4) others (Type 4). Then a number of aspects of mechanical behavior are reviewed and discussed, including the elastic anisotropy, yield strength, high-temperature performance, serration behavior, fracture toughness, and fatigue responses, which may serve as a demonstrative summary for the current progress in the scientific research of HEAs. Several mechanisms that quantitatively explain the mechanical properties of single-phase and multiphase HEAs in terms of basic defects (dislocations, twinning, precipitates, etc.) are discussed. A number of future research activities are suggested, based on the emphasis on developing high-performance structural materials. The review concludes with a brief summary of major mechanical properties and insights into the deformation behavior of single-phase and multiphase HEAs. The comparison and contrast between HEAs and conventional alloys remain the most compelling motivation for future studies. With the integrated experimental and simulation investigations, a clearer picture of the fundamental deformation behavior of single-phase and multiphase HEAs could be explored.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
4. Gao · 2016
5. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
6. Accelerated exploration of multi-principal element alloys with solid solution phases10.1038/ncomms7529 ↗
7. H.Y. Diao, P.K. Liaw, (Unpublished results).
8. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
9. Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys10.1038/srep40704 ↗
10. The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.08.072 ↗
11. Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys10.1016/j.jallcom.2015.05.224 ↗
12. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
13. Critical assessment 14: high entropy alloys and their development as structural materials10.1179/1743284714Y.0000000749 ↗
14. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
15. An assessment on the future development of high-entropy alloys: summary from a recent workshop10.1016/j.intermet.2015.06.021 ↗
16. Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy10.1038/ncomms6964 ↗
17. Design of light-weight high-entropy alloys10.3390/e18090333 ↗
18. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
19. Secondary phases in AlxCoCrFeNi high-entropy alloys: An in-situ TEM heating study and thermodynamic appraisal10.1016/j.actamat.2017.03.066 ↗
20. Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys10.1016/j.matdes.2016.07.073 ↗
21. Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys10.1016/j.actamat.2015.07.030 ↗
22. R. Feng, P.K. Liaw, M.C. Gao, M. Widom, First-principles prediction of high-entropy-alloy stability, 2017, arXiv preprint arXiv:1706.09282.10.1038/s41524-017-0049-4 ↗
23. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
24. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
25. Aluminum alloying effects on lattice types, microstructures, and mechanical behavior of high-entropy alloys systems10.1007/s11837-013-0776-z ↗
26. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
27. Composition dependence of phase stability, deformation mechanisms, and mechanical properties of the CoCrFeMnNi high-entropy alloy system10.1007/s11837-014-1133-6 ↗
28. Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi210.1016/j.scriptamat.2016.06.019 ↗
29. A cuboidal B2 nanoprecipitation-enhanced body-centered-cubic alloy Al0.7CoCrFe2Ni with prominent tensile properties10.1016/j.scriptamat.2016.04.014 ↗
30. Formation of a Huesler-like L2 1 phase in a CoCrCuFeNiAlTi high-entropy alloy10.1016/j.scriptamat.2014.12.006 ↗
31. Structure and mechanical properties of the AlCrxNbTiV (x=0, 0.5, 1, 1.5) high entropy alloys10.1016/j.jallcom.2015.08.224 ↗
32. Single-phase high-entropy alloys - an overview
33. Atomic-level heterogeneity and defect dynamics in concentrated solid-solution alloys10.1016/j.cossms.2017.02.002 ↗
34. B. Murty, J.-W. Yeh, S. Ranganathan, High-entropy Alloys, Butterworth-Heinemann, 2014.10.1016/B978-0-12-800251-3.00002-X ↗
35. High-entropy alloys: a critical assessment of their founding principles and future prospects
36. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
37. Corrosion-resistant high-entropy alloys: a review10.3390/met7020043 ↗
38. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
39. In-situ neutron diffraction study of deformation behavior of a multi-component high-entropy alloy10.1063/1.4863748 ↗
40. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
41. Absence of long-range chemical ordering in equimolar FeCoCrNi10.1063/1.4730327 ↗
42. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility10.1016/j.scriptamat.2013.09.030 ↗
43. Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys10.1016/j.actamat.2012.06.046 ↗
44. Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy10.1016/j.actamat.2015.07.004 ↗
45. A successful synthesis of the CoCrFeNiAl0.3 single-crystal, high-entropy alloy by Bridgman solidification10.1007/s11837-013-0733-x ↗
46. Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy10.1016/j.jallcom.2008.12.088 ↗
47. Anomalous solidification microstructures in Co-free AlxCrCuFeNi2 high-entropy alloys10.1016/j.jallcom.2013.01.007 ↗
48. Aluminum alloying effects on lattice types, microstructures, and mechanical behavior of high-entropy alloys systems10.1007/s11837-013-0776-z ↗
49. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys10.1016/j.actamat.2014.01.029 ↗
50. Effects of Mn Ti and V on the microstructure and properties of AlCrFeCoNiCu high entropy alloy10.1016/j.msea.2008.08.025 ↗
51. Effect of vanadium addition on the microstructure and properties of AlCoCrFeNi high entropy alloy10.1016/j.matdes.2013.12.048 ↗
52. Effect of vanadium addition on the microstructure, hardness, and wear resistance of Al0.5CoCrCuFeNi high-entropy alloy10.1007/s11661-006-0081-3 ↗
53. Microstructure and mechanical properties of multi-component AlCrFeNiMox high-entropy alloys10.1016/j.jallcom.2013.03.253 ↗
54. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
55. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
56. Magnetic and vibrational properties of high-entropy alloys10.1063/1.3538936 ↗
57. Noble metal high entropy alloys10.1016/j.scriptamat.2016.08.017 ↗
58. Dieter · 1986
59. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
60. Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials10.1016/j.scriptamat.2016.10.028 ↗
61. TiZrNbTaMo high-entropy alloy designed for orthopedic implants: as-cast microstructure and mechanical properties10.1016/j.msec.2016.12.057 ↗
62. Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures10.1016/j.intermet.2014.11.005 ↗
63. Processing microstructure and mechanical properties of the CrMnFeCoNi high-entropy alloy10.1007/s11837-015-1589-z ↗
64. Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2014.11.061 ↗
65. Calculating elastic constants in high-entropy alloys using the coherent potential approximation: current issues and errors10.1016/j.commatsci.2015.09.058 ↗
66. First principles exploration of near-equiatomic NiFeCrCo high entropy alloys10.1016/j.jallcom.2016.02.108 ↗
67. Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction10.1016/j.msea.2016.08.010 ↗
68. Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls10.1007/BF01337948 ↗
69. Structural stability of NiCoFeCrAlx high-entropy alloy from ab initio theory10.1103/PhysRevB.88.085128 ↗
70. Ab initio design of elastically isotropic TiZrNbMoVx high-entropy alloys10.1016/j.jallcom.2014.01.237 ↗
71. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
72. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
73. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
74. Effect of temperature on mechanical properties of Al0.5CoCrCuFeNi wrought alloy10.1016/j.jallcom.2009.10.088 ↗
75. Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0218-9 ↗
76. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
77. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
78. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
79. Deformation and annealing behaviors of high-entropy alloy Al0.5CoCrCuFeNi10.1016/j.jallcom.2009.06.182 ↗
80. Deformation characteristics of as-received Haynes230 nickel base superalloy10.1016/j.msea.2008.07.052 ↗
81. A review of refractory metal alloys and mechanically alloyed-oxide dispersion strengthened steels for space nuclear power systems10.1016/j.jnucmat.2004.10.118 ↗
82. A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties10.1016/j.matlet.2014.05.134 ↗
83. The Portevin-Le Chatelier effect in deformation with constant stress rate10.1016/0001-6160(85)90082-3 ↗
84. Serrated yielding in AISI 316 stainless steel10.1016/0001-6160(88)90331-8 ↗
85. Superelasticity and serration behavior in small-sized NiMnGa alloys10.1002/adem.201300518 ↗
86. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
87. Experiments and model for serration statistics in low-entropy, medium-entropy, and high-entropy alloys10.1038/srep16997 ↗
88. Temperature effects on deformation and serration behavior of high-entropy alloys (HEAs)10.1007/s11837-014-1130-9 ↗
89. Stick–slip behavior of serrated flow during inhomogeneous deformation of bulk metallic glasses10.1016/j.actamat.2010.03.011 ↗
90. Serrated flow kinetics in a Zr-based bulk metallic glass10.1016/j.intermet.2010.06.013 ↗
91. Tuned critical avalanche scaling in bulk metallic glasses10.1038/srep04382 ↗
92. Micromechanical model for deformation in solids with universal predictions for stress-strain curves and slip avalanches10.1103/PhysRevLett.102.175501 ↗
93. A simple analytic theory for the statistics of avalanches in sheared granular materials10.1038/nphys1957 ↗
94. Statistics of dislocation slip avalanches in nanosized single crystals show tuned critical behavior predicted by a simple mean field model10.1103/PhysRevLett.109.095507 ↗
95. S.Y. Chen, M.W. Chen, P.K. Liaw, (Unpublished Results).
96. Fracture toughness and fatigue crack growth behavior of as-cast high-entropy alloys10.1007/s11837-015-1563-9 ↗
97. Meeker · 1998
98. Solute strengthening in random alloys10.1016/j.actamat.2016.09.046 ↗
99. Theory of strengthening in fcc high entropy alloys10.1016/j.actamat.2016.07.040 ↗
100. Mechanical properties of solid solutions