3D/4D characterization of strain distribution evolving within the microstructure during plastic deformation
Source abstract
Abstract
Abstract In metals, the difference of deformability of different grains in an aggregate can be absorbed by inhomogeneous deformation. Three-dimensional (3D) non-destructive methods with a high spatial resolution is necessary for characterization of such microscale inhomogeneous deformation. This manuscript describes the two major methods of internal 3D strain measurement: the microstructural features tracking (MFT) and digital volume correlation (DVC), on the basis of four-dimensional (4D, i.e. 3D + time) observation by means of synchrotron radiation tomography (SRCT). Localized strain distributions obtained by these advanced methods are related to the deformed microstructures, allowing a discussion regarding the mechanisms of internal deformation in the true 3D condition of materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. New discoveries in deformed metals10.1007/s11661-001-0167-x ↗
2. Grain interaction effects in polycrystalline Cu10.1016/j.msea.2005.02.043 ↗
3. Influence of grain size in the near-micrometer regime on the deformation microstructure in aluminium10.1016/j.actamat.2013.07.046 ↗
4. Deformation banding mechanism during plane strain compression of cube-oriented F.C.C. crystals10.1016/S1359-6454(00)00042-2 ↗
5. Deformation bands in a [110] aluminium single crystal strained in tension10.1098/rspa.2002.0970 ↗
6. Strain hardening and microstructure evolution of channel-die compressed aluminium bicrystals10.1016/j.msea.2007.05.044 ↗
7. Lamination microstructure in shear deformed copper single crystals10.1016/j.actamat.2009.03.035 ↗
8. L. Delannay, O.V. Mishin, D. Juul. Jensen, P.V. Houtte, Quantitative analysis of grain subdivision in cold rolled aluminium, Acta Mater., 49 (2001) 2441–2451.10.1016/S1359-6454(01)00150-1 ↗
9. EBSD study of grain subdivision of a Goss grain in coarse-grained cold-rolled niobium10.1016/j.scriptamat.2005.03.045 ↗
10. Grain orientation fragmentation in hot-deformed aluminium: experiment and simulation10.1016/j.jmps.2011.11.005 ↗
11. Nano-grain evolution in austenitic stainless steel during multi-directional forging10.1016/j.msea.2010.10.018 ↗
12. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
13. An approach for room-temperature multi-directional forging of pure titanium for strengthening10.1016/j.msea.2018.06.060 ↗
14. Structural evolutions of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗
15. Inter- and intragranular plasticity mechanisms in ultrafine-grained Al thin films: An in situ TEM study10.1016/j.actamat.2012.09.051 ↗
16. Dependence of nanohardness upon indentation size and grain size - A local examination of the interaction between dislocations and grain boundaries10.1016/j.actamat.2006.09.004 ↗
17. Slip band-grain boundary interactions in commercial-purity titanium10.1016/j.actamat.2014.05.015 ↗
18. Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature10.1016/j.actamat.2011.07.047 ↗
19. Growth of 11‾22 twins in titanium: A combined experimental and modelling investigation of the local sate of deformation10.1016/j.actamat.2016.12.066 ↗
20. Sliding of copper [001]-twist grain boundaries detected by shear deformation of liquid B2O3 particles on the grain boundaries10.1016/S1359-6454(99)00467-X ↗
21. High-temperature grain boundary sliding behavior and grain boundary energy in cubic zirconia bicrystals10.1016/j.actamat.2004.01.026 ↗
22. L. Allais, M. Bornert, T. Bretheau, D. Caldemaison., Experimental characterization of the local strain field in a heterogeneous elastoplastic material, Acta Metal. Mater. 42 (1994) 3865–3880.10.1016/0956-7151(94)90452-9 ↗
23. Y.L. Liu, G. Fischer, In situ measurement of local strain in a metal matrix composite by the object grating technique, Scripta Mater. 36 (1997) 1187–1194.10.1016/S1359-6462(97)00013-4 ↗
24. Microscale plastic strain heterogeneity in slip dominated deformation of magnesium alloy containing rare earth10.1016/j.msea.2014.01.102 ↗
25. T.C. Chu, W.F. Ranson, M.A. Sutton, W.H. Peters., Applications of Digital-Image-Correlation Techniques to Experimental Mechanics, Exp. Mech., 25 (1985) 232–244.10.1007/BF02325092 ↗
26. S.R. Mcneill, W.H. Peters, M.A. Sutton., Estimation of stress intensity factor by digital image correlation, Eng. Fract. Mech. 28 (1987) 101–112.10.1016/0013-7944(87)90124-X ↗
27. Digital image correlation: from displacement measurement to identification of elastic properties - a review10.1111/j.1475-1305.2006.00258.x ↗
28. Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials10.1016/j.actamat.2008.02.027 ↗
29. Direct measurement procedure for three-dimensional local crack driving force using synchrotron X-ray microtomography10.1016/j.actamat.2008.08.022 ↗
30. Growth behavior of hydrogen micropores in aluminum alloys during high-temperature exposure10.1016/j.actamat.2009.01.026 ↗
31. Remelting and solidification of a 6082 Al alloy containing submicron yttria particles: 4D experimental study by in situ X-ray microtomography10.1016/j.matdes.2015.07.141 ↗
32. D. Daniel Post, Moiré interferometry: Advances and applications, Exp. Mech. 31 (1991) 276–280.10.1007/BF02326072 ↗
33. C.A. Walker, A historical review of moiré interferometry, Exp. Mech. 34 (1994) 281–299.10.1007/BF02325143 ↗
34. On the visualization of heterogeneous plastic strains by Moiré interferometry10.1016/S0143-8166(01)00106-3 ↗
35. Automatic analysis of speckle photographs with extended range and improved accuracy10.1364/AO.29.000296 ↗
36. Microscopic 3-D displacement field measurements using digital speckle photography10.1016/S0143-8166(03)00028-9 ↗
37. Characterisation of PLC band parameters using laser speckle technique10.1016/j.msea.2003.08.013 ↗
38. Microscopic strain mapping using scanning electron microscopy topography image correlation at large strain10.1243/030932405X16151 ↗
39. On the sequence of inhomogeneous deformation processes occurring during tensile deformation of strip cast AA575410.1016/j.actamat.2005.08.045 ↗
40. A combined temporal tracking and stereo-correlation technique for accurate measurement of 3D displacements: application to sheet metal forming10.1016/S0924-0136(02)00380-1 ↗
41. Analysis by a 3D DIC technique of volumetric deformation gradients: Application to polypropylene/EPR/talc composites10.1016/j.compositesa.2007.08.028 ↗
42. Macroscopic crystal rotation patterns in rolled aluminium single crystals10.1016/S1359-6454(02)00116-7 ↗
43. C.J. Luis Pérez, P. González, Y. Garcés, Equal channel angular extrusion in a commercial Al-Mn alloy, J. Mater. Process. Technol., 143-144 (2003) 506-511.10.1016/S0924-0136(03)00307-8 ↗
44. Measurement of the components of plastic displacement gradients in three-dimensions10.1016/j.msea.2004.01.090 ↗
45. Measurements of plastic displacement gradient components in three dimensions using marker particles and synchrotron X-ray absorption microtomography10.1016/S1359-6454(03)00053-3 ↗
46. Experimental determination of strain partitioning among individual grains in the bulk of an aluminium multicrystal10.1016/j.matchar.2007.07.006 ↗
47. In situ observations of compressive behaviour of aluminium foams by local tomography using high-resolution X-rays10.1080/14786430600724454 ↗
48. High-density 3-D mapping of Internal Strain by Tracking Microstructural Features10.1016/j.actamat.2007.12.058 ↗
49. Three-dimensional strain mapping using in-situ X-ray synchrotron microtomography10.1177/0309324711408975 ↗
50. New tracking algorithm for particle image velocimetry10.1007/BF00203419 ↗
51. Healing behavior of preexisting hydrogen micropores in aluminum alloys during plastic deformation10.1016/j.actamat.2009.06.012 ↗
52. Three-dimensional evaluation of the compression and recovery behavior in a flexible graphite sheet by synchrotron radiation microtomography10.1016/j.matchar.2012.04.008 ↗
53. Compression and recovery micro-mechanisms in flexible graphite10.1016/j.carbon.2013.03.008 ↗
54. The true origin of ductile fracture in aluminium alloy10.1007/s11661-013-2013-3 ↗
55. Grain boundary tracking technique: four-dimensional visualisation technique for determining grain boundary geometry with local strain mapping10.1016/j.actamat.2013.06.013 ↗
56. Diffraction-amalgamated grain boundary tracking for mapping 3D crystallographic orientation and strain fields during plastic deformation10.1016/j.actamat.2016.01.072 ↗
57. B.K. Bay, T.S. Smith, David P. Fyhrie, M. Saad, Digital volume correlation: Three-dimensional strain mapping using X-ray tomography, Exp. Mech., 39(1999) 217–226.10.1007/BF02323555 ↗
58. T.S. Smith, B.K. Bay, M.M. Rashid, Digital volume correlation including rotational degrees of freedom during minimization, Exp. Mech., 42 (2002) 272–278.10.1177/001448502321548346 ↗
59. Digital volume correlation: review of progress and challenges10.1007/s11340-018-0390-7 ↗
60. Three dimensional image correlation from X-ray computed tomography of solid form10.1016/j.compositesa.2007.11.011 ↗
61. Methods and applications of digital volume correlation10.1243/03093247JSA436 ↗
62. Towards high performance digital volume correlation10.1007/s11340-010-9445-0 ↗
63. Development of internal inhomogeneous plastic strain during cold rolling of Al-Mg alloys
64. Takeuchi · Microsc. Microanal. · 2018 · 24 · 106
65. Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests10.1016/j.actamat.2007.08.043 ↗
66. 20 Hz X-ray tomography during an in situ tensile test10.1007/s10704-016-0077-y ↗
67. Investigation of three-dimensional morphology changes of the eutectic Si particles affected by trace P and Sr in Al-7%Si cast alloys by means of synchrotron nano-tomography10.1016/j.matchar.2017.06.009 ↗
68. Observation of Morphology Changes of Fine Eutectic Si Phase in Al-10%Si Cast Alloy during Heat Treatment by Synchrotron Radiation Nanotomography10.3390/ma11081308 ↗
69. Three-dimensional structure of high-performance heat insulator produced with micro and nano particle alumina10.1016/j.matchar.2019.06.023 ↗
70. H.F. Poulsen, Three-Dimensional X-Ray Diffraction Microscopy, Mapping Polycrystals and their Dynamics, Springer-Verlag Berlin Heidelberg, 2004. DOI:10.1007/b97884.10.1007/b97884 ↗
71. D. Juul. Jensen, H.F. Poulsen, The three dimensional X-ray diffraction technique, Mater. Charact., 72 (2012) 1–7.10.1016/j.matchar.2012.07.012 ↗
72. High-energy diffraction microscopy at the advanced photon source10.1007/s11837-011-0116-0 ↗
73. Exploring new links between crystal plasticity models and high-energy X-ray diffraction microscopy10.1016/j.cossms.2019.07.002 ↗
74. X-ray diffraction contrast tomography: a novel technique for the three-dimensional grain mapping of polycrystals. II. The combined case10.1107/S0021889808001726 ↗
75. W. Ludwig, P. Reischig, A. King, M. Herbig, E.M. Lauridsen, G. Johnson, et al., Three dimensional grain mapping by X-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis, Rev. Sci. Instrum. 80 (2009) (033905-1-9).10.1063/1.3100200 ↗
76. Advances in X-ray diffraction contrast tomography: flexibility in the setup geometry and application to multiphase materials10.1107/S0021889813002604 ↗
77. First laboratory X-ray diffraction contrast tomography for grain mapping of polycrystals10.1107/S0021889813022553 ↗
78. Jensen, Grain boundary wetting correlated to the grain boundary properties: A laboratory-based multimodal X-ray tomography investigation10.1016/j.scriptamat.2019.01.007 ↗
79. Polycrystal plasticity: comparison between grain- scale observations of deformation and simulations10.1146/annurev-conmatphys-031113-133846 ↗
80. Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part II – crystal plasticity finite element modeling10.1016/j.actamat.2015.04.025 ↗
81. On the deformation twinning of Mg AZ31B: A three dimensional synchrotron X-ray diffraction experiment and crystal plasticity finite element model10.1016/j.ijplas.2015.03.001 ↗