Oscillatory Thermopower Waves Based on Bi₂Te₃ Films

Abstract Exothermic chemical reactions that are coupled to Bi₂Te₃ porous layers, which are deposited onto terracotta or alumina (Al₂O₃) substrates, are used to produce self‐propagating thermal waves that are guided along the surface. Nitrocellulose is used as the highly reactive chemical. Bi₂Te₃ is employed because of its large Seebeck coefficient and high electrical conductivity. For the Al₂O₃ based structures, the thermal conduction of the substrate results in strong oscillations of the output signals. Such thermopower waves produce a power as large as 10 mW and voltages as high as 150 mV. The power per mass ratio of the developed system is quite remarkable, namely, on the order of 1 kW kg⁻¹. Depending on the thermal conductivity of the substrate used, the wave front average propagation velocity is either slow (ca. 0.009 m s⁻¹ for terracotta) or much faster (on the order of 0.4 m s⁻¹ for Al₂O₃). We have used a mathematical model based on two coupled heat transport equations, in conjunction with the chemical reaction equation, to predict the behavior of the system, which describes the average propagation velocity and the time between oscillation peaks.