Local electrochemical impedance spectroscopy: A window into heterogeneous interfaces
Source abstract
Abstract
The ability to probe surface reactivity on a local scale has led to new insight on the comprehension of the electrochemical reactivity in relation with the microstructure of the surface. Among the different techniques developed in recent years, local electrochemical impedance spectroscopy has the advantage of using a transient approach to locally characterize a stationary electrochemical system without the need to add any redox mediator in solution, which is a great advantage for the study of different systems. In this review, particular attention is paid to the different ways of measuring the local impedance, and the technique implementing a local current measurement in solution is deeply discussed. This local electrochemical impedance spectroscopy journey also encompasses a discussion about technical and experimental limitations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical Analysis and Applications · Conducting polymers and applications · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Local activities of hydroxide and water determine the operation of silver-based oxygen depolarized cathodes10.1002/anie.201807798 ↗
2. High-resolution analysis of photoanodes for water splitting by means of scanning photoelectrochemical microscopy10.1021/acs.analchem.6b03706 ↗
3. Surface interrogation scanning electrochemical microscopy for a photoelectrochemical reaction: water oxidation on a hematite surface10.1021/acs.analchem.7b04728 ↗
4. Electrochemical measurements of reactive oxygen and nitrogen species inside single phagolysosomes of living macrophages10.1021/jacs.9b01217 ↗
5. Quantitative real-time monitoring of antibody-induced internalization of epidermal growth factor receptor on single living mammalian cells using scanning electrochemical microscopy10.1002/celc.201800563 ↗
6. Effect of tensile stress on the passivity breakdown and repassivation of AISI 304 stainless steel: a scanning kelvin probe and scanning electrochemical microscopy study10.1149/2.0251911jes ↗
7. Self-healing characteristic of praseodymium conversion coating on AZNd Mg alloy studied by scanning electrochemical microscopy10.1016/j.elecom.2017.01.004 ↗
8. The reduction of dissolved oxygen during magnesium corrosion
9. Influence of inhibitor adsorption on readings of microelectrode during SVET measurements10.1016/j.electacta.2019.134761 ↗
10. Direct observation of C2O4(*-) and CO2(*-) by oxidation of oxalate within nanogap of scanning electrochemical microscope10.1021/jacs.8b08900 ↗
11. Characterization of adsorbates by transient measurements in scanning electrochemical microscopy10.1016/j.electacta.2014.02.002 ↗
12. Mass transport in porous electrodes studied by scanning electrochemical microscopy: Example of nanoporous gold10.1002/celc.201900634 ↗
13. Scanning electrochemical microscopy: a comprehensive review of experimental parameters from 1989 to 201510.1021/acs.chemrev.6b00067 ↗
14. Scanning electrochemical microscopy at the nanometer level10.1039/C7CC09777H ↗
15. High resolution mapping of oxygen reduction reaction kinetics at polycrystalline platinum electrodes10.1039/C4CP01511H ↗
16. Scanning electrochemical cell microscopy: theory and experiment for quantitative high resolution spatially-resolved voltammetry and simultaneous ion-conductance measurements10.1021/ac203195h ↗
17. Scanning ion conductance microscopy: quantitative nanopipette delivery-substrate electrode collection measurements and mapping10.1021/acs.analchem.8b05449 ↗
18. Scanning electrochemical cell microscopy (SECCM) chronopotentiometry: development and applications in electroanalysis and electrocatalysis10.1021/acs.analchem.9b02091 ↗
19. An ultrasensitive vibrating probe for measuring steady extracellular currents10.1083/jcb.63.2.614 ↗
20. Review—on the application of the scanning vibrating electrode technique (SVET) to corrosion research10.1149/2.0431714jes ↗
21. A novel method for generating quantitative local electrochemical impedance spectroscopy10.1149/1.2069332 ↗
22. Local electrochemical impedance spectroscopy: a review and some recent developments
23. Comparison of local electrochemical impedance measurements derived from bi-electrode and microcapillary techniques10.1016/j.electacta.2009.05.029 ↗
24. Local and global electrochemical impedances applied to the corrosion behaviour of an AZ91 magnesium alloy10.1016/j.corsci.2009.05.005 ↗
25. Local electrochemical impedance measurement: scanning vibrating electrode technique in ac mode10.1016/S0013-4686(99)00126-7 ↗
26. Electrochemical aspects of pitting corrosion10.1016/S0010-938X(67)80073-8 ↗
27. The effect of height on the current distribution measured with a vibrating electrode probe10.1149/1.2085665 ↗
28. Pitting corrosion by bacteria on carbon steel, determined by the scanning vibrating electrode technique10.1016/0010-938X(91)90014-G ↗
29. Quasi-simultaneous measurements of ionic currents by vibrating probe and pH distribution by ion-selective microelectrode10.1016/j.elecom.2010.11.002 ↗
30. A high-resolution probe for localized electrochemical impedance spectroscopy measurements10.1149/1.1837729 ↗
31. Review—advances in scanning electrochemical microscopy (SECM)10.1149/2.0141604jes ↗
32. A novel way of measuring local electrochemical impedance using a single vibrating probe10.1149/1.1837562 ↗
33. The apparent constant-phase-element behavior of an ideally polarized blocking electrode a global and local impedance analysis10.1149/1.2398882 ↗
34. The global and local impedance response of a blocking disk electrode with local constant-phase-element behavior10.1149/1.2398889 ↗
35. The apparent constant-phase-element behavior of a disk electrode with Faradaic reactions. A global and local impedance analysis10.1149/1.2398894 ↗
36. From frequency dispersion to ohmic impedance: a new insight on the high-frequency impedance analysis of electrochemical systems10.1016/j.electacta.2019.134609 ↗
37. Development of quantitative Local Electrochemical Impedance Mapping: an efficient tool for the evaluation of delamination kinetics10.1016/j.electacta.2017.03.076 ↗
38. Understanding the effects of applied cathodic protection potential and environmental conditions on the rate of cathodic disbondment of coatings by means of local electrochemical measurements on a multi-electrode array10.1016/j.porgcoat.2016.10.020 ↗
39. Local electrochemical impedance spectroscopy in dynamic mode of galvanic coupling10.1016/j.electacta.2018.05.192 ↗
40. High frequency impedance measurements at ultramicroelectrodes10.1016/0013-4686(95)00429-7 ↗
41. Scanning electrochemical microscopy. 24. Enzyme ultramicroelectrodes for the measurement of hydrogen peroxide at surfaces10.1021/ac00072a013 ↗
42. Impedance feedback control for scanning electrochemical microscopy10.1021/ac010581q ↗
43. Positive and negative AC impedance feedback observed above conductive substrates under SECM conditions10.1016/j.electacta.2006.06.020 ↗
44. Scanning electrochemical microscopy imaging by means of high-frequency impedance measurements in feedback mode10.1021/jp0496809 ↗
45. Constant-distance mode AC-SECM for the visualisation of corrosion pits10.1016/j.elecom.2007.03.035 ↗
46. Alternating current (AC) impedance imaging with combined atomic force scanning electrochemical microscopy (AFM-SECM)10.1016/j.elecom.2007.01.027 ↗
47. An impedance investigation of the mechanism of pure magnesium corrosion in sodium sulfate solutions10.1149/1.2401056 ↗
48. Concentration mapping around copper microelectrodes studied by scanning electrochemical microscopy10.1016/j.elecom.2005.06.018 ↗
49. Scanning electrochemical microscopy of model neurons: imaging and real-time detection of morphological changes10.1021/ac026166v ↗
50. Alternating current scanning electrochemical microscopy with simultaneous fast-scan cyclic voltammetry10.1021/ac302402p ↗
51. Localized electrochemical impedance spectroscopy: visualization of spatial distributions of the key parameters describing solid/liquid interfaces10.1021/ac303490t ↗
52. Localized impedance measurements for electrochemical surface science10.1021/jp412505p ↗
53. Characterisation of localised corrosion processes using scanning electrochemical impedance microscopy10.1016/j.elecom.2014.04.011 ↗
54. Application of AC impedance techniques to scanning electrochemical microscopy10.1007/s10008-004-0533-x ↗
55. In situ characterization of ultrathin films by scanning electrochemical impedance microscopy10.1021/acs.analchem.6b00011 ↗
56. Differentiation between single- and double-stranded DNA through local capacitance measurements10.1002/celc.201600075 ↗
57. Alternating-current measurements in scanning electrochemical microscopy, Part 1: principle and theory10.1002/cphc.201001084 ↗
58. Alternating current measurements in scanning electrochemical microscopy, Part 2: detection of adsorbates10.1002/cphc.201001085 ↗
59. Localized electrochemical impedance measurements on nafion membranes: observation and analysis of spatially diverse proton transport using atomic force microscopy10.1021/acs.analchem.9b02218 ↗
60. Electrical mapping of AISI 304 stainless steel subjected to intergranular corrosion performed by means of AFM–LIS in the contact mode10.1016/j.corsci.2013.02.001 ↗