Technology of electrochemical impedance spectroscopy for an energy-sustainable society
Source abstract
Abstract
Electrochemical impedance spectroscopy has been widely used to understand the chemistry and physics of battery systems. This review covers electrochemical impedance spectroscopy used for the interpretation of impedance data of lithium-ion batteries (LIBs) from advanced equivalent circuit models to the mathematical model, which is developed by John Newman. In addition, as a method to realize an energy-sustainable society using diagnostics based on the combination of LIBs and electrochemical impedance spectroscopy, on-board diagnostics of battery packs are achieved based on an input signal generated by a power controller in a battery management system instead of the conventionally used frequency response analyzer. The diagnostic system is applicable to energy management systems which are installed in homes, buildings, and communities, accumulating the impedance data on state of health of LIBs. Finally, a future possibility regarding the diagnostics of battery packs coupled with the machine learning of impedance data is introduced.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. Impedance spectroscopy10.1007/BF02368532 ↗
2. Barsoukov · 2005
3. Orazem · 2008
4. Application of on-line impedance measurement using fast fourier transform to electrochemical systems10.1246/bcsj.55.36 ↗
5. Methode zur Bestimmung von Dielektrizitätskonstanten
6. Ueber die Polarisationskapazität des Platins10.1002/andp.19013110910 ↗
7. The kinetics of discharge and ionization of hydrogen adsorbed at Pt-electrode
8. Kinetics of rapid electrode reactions
9. On porous electrodes in electrolyte solutions: I. Capacitance effects10.1016/0013-4686(63)80042-0 ↗
10. On porous electrodes in electrolyte solutions—IV10.1016/0013-4686(64)85015-5 ↗
11. Dispersion and absorption in dielectrics i. alternating current characteristics
12. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
13. Note on the parameterization of the constant-phase admittance element10.1016/0167-2738(84)90049-3 ↗
14. Plasticized carbon electrodes of interest for lithium rocking chair batteries10.1016/0378-7753(93)80022-H ↗
15. On the correlation between surface chemistry and performance of graphite negative electrodes for Li ion batteries10.1016/S0013-4686(99)00194-2 ↗
16. Charge/discharge cycling behavior of pitch-based carbon fiber in organic electrolyte solutions10.1016/0013-4686(93)85068-A ↗
17. Structural and kinetic characterization of lithium intercalation into carbon anodes for secondary lithium batteries10.1149/1.2044017 ↗
18. Impedance study on the electrochemical lithium intercalation into natural graphite powder10.1149/1.1838231 ↗
19. Impedance analysis of silicon nanowire lithium ion battery anodes10.1021/jp901594g ↗
20. Silicon composite thick film electrodeposited on a nickel micro-nanocones hierarchical structured current collector for lithium batteries10.1016/j.jpowsour.2012.09.008 ↗
21. Electrodeposited three-dimensional porous Si-O-C/Ni thick film as high performance anode for lithium-ion batteries10.1016/j.jpowsour.2014.09.042 ↗
22. Effect of low-temperature conditions on passive layer growth on Li intercalation materials10.1149/1.1838703 ↗
23. Diffusion coefficients of lithium ions during intercalation into graphite derived from the simultaneous measurements and modeling of electrochemical impedance and potentiostatic intermittent titration characteristics of thin graphite electrodes10.1021/jp9701911 ↗
24. On the capacity fading of LiCoO2 intercalation electrodes:: the effect of cycling, storage, temperature, and surface film forming additives10.1016/S0013-4686(02)00417-6 ↗
25. On the stability of LiFePO4 olivine cathodes under various conditions (electrolyte solutions, temperatures)10.1149/1.2403974 ↗
26. Reaction behavior of LiFePO4 as a cathode material for rechargeable lithium batteries10.1016/S0167-2738(02)00064-4 ↗
27. Review on electrode–electrolyte solution interactions, related to cathode materials for Li-ion batteries10.1016/j.jpowsour.2006.10.025 ↗
28. Impedance studies for separators in rechargeable lithium batteries10.1149/1.2056243 ↗
29. Characterization of composite cellulosic separators for rechargeable lithium-ion batteries10.1016/S0378-7753(96)02450-0 ↗
30. On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries10.1016/S0013-4686(01)00858-1 ↗
31. Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using a symmetric cell10.1149/2.057207jes ↗
32. Impedance spectroscopy characterization of porous electrodes under different electrode thickness using a symmetric cell for high-performance lithium-ion batteries10.1021/jp512564f ↗
33. AC impedance analysis of ionic and electronic conductivities in electrode mixture layers for an all-solid-state lithium-ion battery10.1016/j.jpowsour.2016.03.059 ↗
34. Impedance analysis with transmission line model for reaction distribution in a pouch type lithium-ion battery by using micro reference electrode10.1149/2.0341603jes ↗
35. Complex impedance spectra of porous electrode with fractal structure, Electrochim
36. Ionic conduction in lithium ion battery composite electrode governs cross-sectional reaction distribution10.1038/srep26382 ↗
37. Modeling graphite anodes with serial and transmission line models10.1016/j.jpowsour.2015.02.038 ↗
38. Ion transport in porous electrodes obtained by impedance using a symmetric cell with predictable low-temperature battery performance10.1021/acs.jpclett.9b01670 ↗
39. Systematic analysis of interfacial resistance between the cathode layer and the current collector in lithium-ion batteries by electrochemical impedance spectroscopy10.1016/j.jpowsour.2018.09.014 ↗
40. An impedance analysis on properties of DMFC catalyst layers based on primary and secondary pores10.1149/1.2752099 ↗
41. Impedance analysis counting reaction distribution on degradation of cathode catalyst layer in PEFCs10.1149/1.3610988 ↗
42. Impedance analysis of the effect of flooding in the cathode catalyst layer of the polymer electrolyte fuel cell10.1016/j.electacta.2013.06.055 ↗
43. Distinction of impedance responses of Li-ion batteries for individual electrodes using symmetric cells10.1016/j.electacta.2014.01.091 ↗
44. Electrochemical impedance spectroscopy analysis with a symmetric cell for LiCoO2 cathode degradation correlated with Co dissolution
45. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
46. Influence of capacity fading on commercial lithium-ion battery impedance10.1016/S0378-7753(03)00233-7 ↗
47. Common electroanalytical behavior of Li intercalation processes into graphite and transition metal oxides10.1149/1.1838758 ↗
48. The basic electroanalytical behavior of practical graphite-lithium intercalation electrodes10.1016/S0013-4686(97)10172-4 ↗
49. Kinetics of lithium intercalation into carbon anodes: in situ impedance investigation of thickness and potential dependence10.1016/S0167-2738(98)00411-1 ↗
50. Solid-state electrochemical kinetics of Li-ion intercalation into Li1−xCoO2: simultaneous application of electroanalytical techniques SSCV, PITT, and EIS10.1149/1.1391759 ↗
51. Studies on capacity fade of lithium-ion batteries10.1016/S0378-7753(00)00469-9 ↗
52. Two- and three-electrode impedance studies on 18650 Li-ion cells10.1016/S0378-7753(99)00469-3 ↗
53. Studies on the cycle life of commercial lithium ion batteries during rapid charge-discharge cycling10.1016/S0378-7753(01)00821-7 ↗
54. AC impedance study of high-power lithium-ion secondary batteries—effect of battery size10.1149/1.3525277 ↗
55. Electrochemical impedance analysis on degradation of commercially available lithium ion battery during charge–discharge cycling10.1246/cl.2012.444 ↗
56. Proposal of novel equivalent circuit for electrochemical impedance analysis of commercially available lithium ion battery10.1016/j.jpowsour.2012.01.070 ↗
57. Electrochemical impedance spectroscopy analysis for lithium-ion battery using Li4Ti5O12 anode10.1016/j.jpowsour.2012.09.010 ↗
58. Optimization of reference electrode position in a three-electrode cell for impedance measurements in lithium-ion rechargeable battery by finite element method10.1016/j.jpowsour.2015.04.065 ↗
59. Review—development of diagnostic process for commercially available batteries, especially lithium ion battery, by electrochemical impedance spectroscopy10.1149/2.0141514jes ↗
60. The influence of anomalous diffusion on the impedance response of LiCoO2|C batteries10.1016/j.jpowsour.2015.05.047 ↗
61. Application of finite-diffusion models for the interpretation of chronoamperometric and electrochemical impedance responses of thin lithium insertion V2O5 electrodes10.1016/S0167-2738(01)00819-0 ↗
62. Kinetic characterization of single particles of LiCoO2 by AC impedance and potential step methods10.1149/1.1359197 ↗
63. Electrochemical impedance spectroscopy study of a lithium/sulfur battery: modeling and analysis of capacity fading10.1149/2.026304jes ↗
64. Two parallel diffusion paths model for interpretation of PITT and EIS responses from non-uniform intercalation electrodes10.1016/j.jelechem.2003.07.014 ↗
65. Impedance analysis of LiNi1/3Mn1/3Co1/3O2 cathodes with different secondary-particle size distribution in lithium-ion battery10.1016/j.electacta.2017.04.153 ↗
66. Understanding the influence of conductive carbon additives surface area on the rate performance of LiFePO4 cathodes for lithium ion batteries10.1016/j.carbon.2013.07.083 ↗
67. Carbon black and vapor grown carbon fibers binary conductive additive for the Li1.18Co0.15Ni0.15Mn0.52O2 electrodes for Li-ion batteries10.1016/j.matchemphys.2015.02.024 ↗
68. How a very trace amount of graphene additive works for constructing an efficient conductive network in LiCoO2-based lithium-ion batteries10.1016/j.carbon.2016.03.032 ↗
69. High-temperature carbon-coated aluminum current collector for enhanced power performance of LiFePO4 electrode of Li-ion batteries10.1016/j.elecom.2010.01.028 ↗
70. Designing current collector/composite electrode interfacial structure of organic radical battery10.1016/j.jpowsour.2010.10.092 ↗
71. Effects of current collectors on power performance of Li4Ti5O12 anode for Li-ion battery10.1016/j.jpowsour.2011.09.014 ↗
72. Strategies to reduce the resistance sources on electrochemical double layer capacitor electrodes10.1016/j.jpowsour.2013.04.031 ↗
73. Low contact resistance carbon thin film modified current collectors for lithium ion batteries10.1016/j.tsf.2014.07.064 ↗
74. Graphene modified copper current collector for enhanced electrochemical performance of Li-ion battery10.1016/j.scriptamat.2017.11.030 ↗
75. Electrochemical impedance spectroscopy study of the SEI formation on graphite and metal electrodes10.1016/j.jpowsour.2005.05.034 ↗
76. In situ electrochemical impedance spectroscopy to investigate negative electrode of lithium-ion rechargeable batteries10.1016/j.jpowsour.2004.04.004 ↗
77. Electrochemical impedance spectroscopy response study of a commercial graphite-based negative electrode for Li-ion batteries as function of the cell state of charge and ageing10.1016/j.electacta.2016.12.013 ↗
78. Formation of solid electrolyte interface in lithium nickel mixed oxide electrodes during the first cycling10.1149/1.1464506 ↗
79. Impedance measurements of kilowatt-class lithium ion battery modules/cubicles in energy storage systems by square-current electrochemical impedance spectroscopy10.1016/j.electacta.2017.05.076 ↗
80. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
81. Computer simulations of the impedance response of lithium rechargeable batteries10.1149/1.1393162 ↗
82. The impedance response of a porous electrode composed of intercalation particles10.1149/1.1393627 ↗
83. Analytical expression for the impedance response for a lithium-ion cell10.1149/1.2976359 ↗
84. Extending Newman's pseudo-two-dimensional lithium-ion battery impedance simulation approach to include the nonlinear harmonic response10.1149/2.0301711jes ↗
85. Experiments on and modeling of positive electrodes with multiple active materials for lithium-ion batteries10.1149/1.3129656 ↗
86. Application of electrochemical impedance spectroscopy to ferri/ferrocyanide redox couple and lithium ion battery systems using a square wave as signal input10.1016/j.electacta.2015.08.083 ↗
87. Simultaneous determination of electrochemical impedance of lithium-ion rechargeable batteries with measurement of charge-discharge curves by wavelet transformation10.1016/j.electacta.2017.03.077 ↗
88. Wavelet transformation to determine impedance spectra of lithium-ion rechargeable battery10.1016/j.jpowsour.2016.03.048 ↗
89. Adaptive prognosis of lithium-ion batteries based on the combination of particle filters and radial basis function neural networks10.1016/j.jpowsour.2017.01.105 ↗
90. State-of-health identification of lithium-ion batteries based on nonlinear frequency response analysis: first steps with machine learning10.3390/app8050821 ↗
91. 2015
92. New and non-destructive diagnostic system to probe battery failure