Synchronous Regulation of Donor and Acceptor Microstructure using Thiophene‐Derived Non‐Halogenated Solvent Additives for Efficient and Stable Organic Solar Cells

Abstract Solvent additives are pivotal for enhancing the morphology, efficiency, and stability of organic solar cells (OSCs). However, the widely used additive, 1,8‐diiodooctane (DIO), has drawbacks like harmful halogen content and potential OSC degradation. To address these issues, novel non‐halogenated, thienyl‐alkyl‐thienyl structural solvent additives—DTP, DTH, and DTN—featuring varying alkyl linker lengths of (CH₂)₃, (CH₂)₆, and (CH₂)₉, respectively are introduced. Additives with longer alkyl linkers, DTH and DTN, effectively dissolve and strongly interact with both the donor polymer PM6 and acceptor L8‐BO. This dual interaction enables precise tuning of their microstructures, resulting in enhanced crystallinity. Upon incorporating DTH as an additive in OSCs (PM6:L8‐BO), a minimal voltage loss is observed, leading to an impressive efficiency of 18.51%, surpassing the 17.90% achieved with DIO. Furthermore, DTH‐based devices demonstrated superior photostability. In a ternary blend system (PM6:D18‐Cl:L8‐BO), an efficiency of 19.07% is attained, outperforming previous non‐halogenated solvent additive‐based OSCs. Furthermore, employing a non‐halogenated processing solvent combination of toluene and carbon disulfide, a high PCE of 18.82% is achieved. These results underscore the efficacy of designing solvent additives with aromatic and alkyl units, enabling tailored interactions with the donor and acceptor, thereby presenting a robust strategy for optimizing OSC performance and stability.