Facile Nanowelding Process for Silver Nanowire Electrodes Toward High‐Performance Large‐Area Flexible Organic Light‐Emitting Diodes

Abstract Despite considerable interest, uniform and robust flexible transparent conducting electrodes (FTCEs) that can be seamlessly integrated and used for highly efficient large‐area flexible oganic light‐emitting diodes (OLEDs) remain elusive. In this study, a large‐area fabrication of uniform transparent electrodes for high‐performance flexible OLEDs by exploiting the rapid nanowelding process of silver nanowires (AgNWs) onto polyethylene terephthalate substrate under Xe‐lamp irradiation and mechanical pressing treatment is reported. The performance of AgNWs FTCEs is significantly enhanced by applying the Xe‐lamp beam irradiation for 5 s and subsequent compression at 20 MPa for 15 s, achieving a low sheet resistance of 26.5 Ω sq ⁻¹ , a high transmittance of 95.2% (at 550 nm), and very smooth surfaces with root‐mean‐square of 5.4 nm. Meanwhile, the nanowelded AgNWs FTCEs maintain excellent electrical conductivity (only a 2.96% increase in Δ R / R ₀ ) after 1000 bending cycles. The resulting AgNWs FTCEs‐based green phosphorescent OLED achieves an unprecedented external quantum efficiency (EQE) of 23.7% and a current efficiency as high as 81.5 cd A ⁻¹ . Benefiting from the uniform properties for resulting AgNWs FTCEs, the fabricated flexible OLED with a large area of 25 × 25 mm ² still retains a high EQE of 22.2% and a current efficiency of 78.0 cd A ⁻¹ _.