Performance Evaluation of Sustainable Concrete Comprising Waste Polypropylene Food Tray Fibers and Palm Oil Fuel Ash Exposed to Sulfate and Acid Attacks
Source abstract
Abstract
Sulfate and acid attacks cause material degradation, which is a severe durability concern for cementitious materials. The performance of concrete composites comprising waste plastic food trays (WPFTs) as low-cost fibers and palm oil fuel ash (POFA) exposed to acid and sulfate solutions has been evaluated in an immersion period of 12 months. In this study, visual assessment, mass variation, compressive strength, and microstructural analyses are investigated. For ordinary Portland cement (OPC), six concrete mixtures, including 0–1% WPFT fibers with a length of 20 mm, were prepared. In addition, another six mixtures with similar fiber dosages were cast, with 30% POFA replacing OPC. It was discovered that adding WPFT fibers and POFA to concrete reduced its workability. POFA concrete mixes were found to have higher long-term compressive strength than OPC concrete mixes cured in water. As a result of the positive interaction between POFA and WPFT fibers, both the crack formation and spalling of concrete samples exposed to acid and sulfate solutions were reduced, as was the strength loss. The study’s findings show that using WPFT fibers combined with POFA to develop a novel fiber-reinforced concrete subjected to chemical solutions is technically and environmentally feasible. WPFT fibers have a significant protective effect on concrete against chemical attacks.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Smart Infrastructure and Innovative Construction (ISIIC), School of Civil Engineering, Universiti Teknologi Malaysia (UTM), Skudai 81310, Malaysia
Department of Civil Engineering, Prince Sattam Bin Abdulaziz University, Al-Kharj 16273, Saudi Arabia
References (48)
Show source-provided references
1. Use of recycled plastics in concrete: A critical review10.1016/j.wasman.2016.03.005 ↗
2. Repurposing waste plastics into cleaner asphalt pavement materials: A critical literature review10.1016/j.jclepro.2020.124355 ↗
3. Closing the loop for PET, PE and PP waste from households: Influence of material properties and product design for plastic recycling10.1016/j.wasman.2019.07.005 ↗
4. The use of electrostatic techniques for the identification and sorting of waste packaging materials10.1016/j.resconrec.2004.08.001 ↗
5. Lifetime prediction of food and beverage packaging wastes10.1007/s10973-015-5169-9 ↗
6. Food packaging based on polymer nanomaterials10.1016/j.progpolymsci.2011.02.003 ↗
7. Thermal and mechanical characterisation of plasticised poly (L-lactide-co-D, L-lactide) films for food packaging10.1007/s10973-006-7897-3 ↗
8. Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash10.1016/j.jclepro.2016.12.151 ↗
9. Life cycle cost analysis of lightweight green concrete utilizing recycled plastic aggregates10.1016/j.jobe.2021.102670 ↗
10. Microstructure and residual properties of green concrete composites incorporating waste carpet fibers and palm oil fuel ash at elevated temperatures10.1016/j.jclepro.2016.12.168 ↗
11. Hubo, S., Leite, L., Martins, C., and Ragaert, K. (2014, January 10–12). Evaluation of post-industrial and post-consumer polyolefin-based polymer waste streams for injection moulding. Proceedings of the 6th Polymers & Mould Innovations International Conference, Guimaraes, Portugal.
12. A review on tertiary recycling of high-density polyethylene to fuel10.1016/j.resconrec.2011.05.005 ↗
13. Use of recycled plastic in concrete: A review10.1016/j.wasman.2007.09.011 ↗
14. Use of recycled plastic as fine aggregate in cementitious composites: A review10.1016/j.conbuildmat.2020.119146 ↗
15. Alyousef, R., Mohammadhosseini, H., Alrshoudi, F., Alabduljabbar, H., and Mohamed, A.M. (2020). Enhanced performance of concrete composites comprising waste metalised polypropylene fibres exposed to aggressive environments. Crystals., 10.10.3390/cryst10080696 ↗
16. Mohammadhosseini, H., Alyousef, R., and Tahir, M.M. (2021). Towards Sustainable Concrete Composites through Waste Valorisation of Plastic Food Trays as Low-Cost Fibrous Materials. Sustainability., 13.10.3390/su13042073 ↗
17. Alrshoudi, F., Mohammadhosseini, H., Alyousef, R., Alabduljabbar, H., and Mustafa Mohamed, A. (2020). The impact resistance and deformation performance of novel pre-packed aggregate concrete reinforced with waste polypropylene fibres. Crystals., 10.10.3390/cryst10090788 ↗
18. Synergistic effects of waste plastic food tray as low-cost fibrous materials and palm oil fuel ash on transport properties and drying shrinkage of concrete10.1016/j.jobe.2021.102826 ↗
19. Evaluation of concrete containing waste plastic shredded fibers: Ductility properties10.1002/suco.201900512 ↗
20. Recycled polyolefins waste as aggregates for lightweight concrete10.1016/j.compositesb.2016.09.041 ↗
21. Sulfate resistance of limestone cement concrete exposed to combined chloride and sulfate environment at low temperature10.1016/j.cemconcomp.2012.05.006 ↗
22. Enhanced performance for aggressive environments of green concrete composites reinforced with waste carpet fibers and palm oil fuel ash10.1016/j.jclepro.2018.03.051 ↗
23. Evaluation of sulfate resistance of concrete with recycled and natural aggregates10.1016/j.conbuildmat.2017.06.161 ↗
24. Effect of fibre type and content on performance of bio-based concrete containing heat-treated apricot shell10.1617/s11527-020-01570-0 ↗
25. The confused world of sulfate attack on concrete10.1016/j.cemconres.2004.04.004 ↗
26. An experimental study of combined acid and sulfate attack of concrete10.1016/S0958-9465(03)00123-9 ↗
27. Effect of acid attack on FRP-to-concrete bonded interfaces10.1016/j.conbuildmat.2017.06.140 ↗
28. Freeze-thaw resistance of recycled aggregate concrete damaged by simulated acid rain10.1016/j.jclepro.2020.124396 ↗
29. Durability performance of concrete incorporating waste metalized plastic fibres and palm oil fuel ash10.1016/j.conbuildmat.2018.05.282 ↗
30. Performance optimization of hybrid fiber concretes against acid and sulfate attack10.1016/j.jobe.2020.101443 ↗
31. Experimental research on durability of high-performance synthetic fibers reinforced concrete: Resistance to sulfate attack and freezing-thawing10.1016/j.conbuildmat.2020.120055 ↗
32. Sulfate resistance of hybrid fiber reinforced metakaolin geopolymer composites10.1016/j.compositesb.2019.107689 ↗
33. Waste metalized film food packaging as low cost and ecofriendly fibrous materials in the production of sustainable and green concrete composites10.1016/j.jclepro.2020.120726 ↗
34. The effects of pozzolanic binders and polypropylene fibers on durability of SCC to magnesium sulfate attack10.1016/j.conbuildmat.2012.08.035 ↗
35. The effects of macro synthetic fiber reinforcement use on physical and mechanical properties of concrete10.1016/j.compositesb.2014.01.043 ↗
36. Resistance of fiber-reinforced fly ash-steel slag based geopolymer mortar to sulfate attack and drying-wetting cycles10.1016/j.conbuildmat.2020.121326 ↗
37. Workability, strength and flexural toughness properties of hybrid steel fiber reinforced SCC with high-volume fiber10.1016/j.conbuildmat.2020.120944 ↗
38. Effects of hybrid fibers on workability, mechanical, and time-dependent properties of high strength fiber-reinforced self-consolidating concrete10.1016/j.conbuildmat.2021.122325 ↗
39. Rheological and tribological behaviors of polypropylene fiber reinforced concrete10.1016/j.conbuildmat.2020.119962 ↗
40. Enhancement of strength and transport properties of a novel preplaced aggregate fiber reinforced concrete by adding waste polypropylene carpet fibers10.1016/j.jobe.2019.101003 ↗
41. Alrshoudi, F., Mohammadhosseini, H., Alyousef, R., Alghamdi, H., Alharbi, Y.R., and Alsaif, A. (2020). Sustainable use of waste polypropylene fibers and palm oil fuel ash in the production of novel prepacked aggregate fiber-reinforced concrete. Sustainability., 12.10.3390/su12124871 ↗
42. The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concrete10.1016/j.conbuildmat.2009.11.025 ↗
43. Comprehensive resistance of fair-faced concrete suffering from sulfate attack under marine environments10.1016/j.conbuildmat.2021.122312 ↗
44. Sulfate attack resistance of recycled aggregate concrete with NaOH-solution-treated crumb rubber10.1016/j.conbuildmat.2021.123044 ↗
45. Drying shrinkage and creep properties of prepacked aggregate concrete reinforced with waste polypropylene fibers10.1016/j.jobe.2020.101522 ↗
46. Effects of waste ceramic as cement and fine aggregate on durability performance of sustainable mortar10.1007/s13369-019-04198-7 ↗
47. Durability and thermal properties of prepacked aggregate concrete reinforced with waste polypropylene fibers10.1016/j.jobe.2020.101723 ↗
48. Performance evaluation of novel prepacked aggregate concrete reinforced with waste polypropylene fibers at elevated temperatures10.1016/j.conbuildmat.2020.120418 ↗