Prediction of Residual Stress Distribution in NM450TP Wear-Resistant Steel Welded Joints
Source abstract
Abstract
This study developed a thermo-metallurgical-mechanical simulation method to calculate the temperature field and residual stress distribution in the NM450TP wear-resistant steel welded joints. During the simulation, the solid-state phase transformation and softening effect of NM450TP wear-resistant steel was considered. The simulation results were compared with the experimental results, which verified the feasibility of this method. The influences of solid-state phase transformation and softening effect on the welding residual stress distribution were discussed. The numerical simulation results showed that the solid-state phase transformation had a more significant effect on the magnitude and distribution of the longitudinal residual stress than that of the transverse residual stress. The softening effect had a significant influence on the peak value of the longitudinal residual stress and had little influence on the transverse residual stress. Comparing the numerical simulation results with the experimental results, it could be seen that the calculation results of the welding residual stress were in the best agreement with the experimental measurement results when the solid-state transformation and softening effects were considered at the same time.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Fatigue and fracture mechanics · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
Technical Center, Handan Iron & Steel Group Co., Ltd., Handan 056015, China
College of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063210, China
Funding
National Natural Science Foundation of China · National Key R&D Program of China · Natural Science Foundation of Chongqing · Fundamental Research Funds for the Central Universities Project · State Key Laboratory of Advanced Welding & Joining
References (33)
Show source-provided references
1. Feng, G., Wang, H., Wang, Y., Deng, D., and Zhang, J. (2022). Numerical Simulation of Residual Stress and Deformation in Wire Arc Additive Manufacturing. Crystals, 12.10.3390/cryst12060803 ↗
2. Influence of welding sequence on residual stress distribution and deformation in Q345 steel H-section butt-welded joint10.1016/j.jmrt.2021.04.059 ↗
3. Research progress on weldability of advanced steel materials
4. Variable amplitude fatigue tests at high frequency hammer peened welded ultra high strength steel S110010.1016/j.prostr.2016.06.443 ↗
5. Underwater wet welding of S1300 ultra-high strength steel10.1016/j.marstruc.2021.103120 ↗
6. Derazkola, H.A., García Gil, E., Murillo-Marrodán, A., and Méresse, D. (2021). Review on Dynamic Recrystallization of Martensitic Stainless Steels during Hot Deformation: Part I—Experimental Study. Metals, 11.10.3390/met11040572 ↗
7. Review on modeling and simulation of dynamic recrystallization of martensitic stainless steels during bulk hot deformation10.1016/j.jmrt.2022.03.179 ↗
8. Influence of lumping passes on calculation accuracy and efficiency of welding residual stress of thick-plate butt joint in boiling water reactor10.1016/j.engstruct.2020.111136 ↗
9. Effect of creep on prediction accuracy and calculating efficiency of residual stress in post weld heat treatment
10. Influence of material model on prediction accuracy of welding residual stress in an austenitic stainless steel multi-pass butt-welded joint10.1007/s11665-017-2626-6 ↗
11. Study on welding deformation numerical simulation for ultra-high strength steel BS960E10.1016/j.promfg.2019.12.020 ↗
12. Numerical simulation of multiphysics coupling in welding process of high strength and low alloy steel
13. FEM prediction of buckling distortion induced by welding in thin plate panel structures10.1016/j.commatsci.2008.01.003 ↗
14. Influence of solid-state phase transformation on residual stress in P92 steel welded joint
15. Finite element analysis of stress field in laser cladding forming considering solid state phase transformation
16. Measurement and analysis of welding deformation and residual stress in CMT welded lap joints of 1180MPa steel sheets10.1016/j.jmapro.2021.10.050 ↗
17. Study on softening phenomenon of welded joints of low-alloy high-strength wear-resistant steel
18. Numerical investigation of formation mechanism of welding residual stress in P92 steel multi-pass joints10.1016/j.jmatprotec.2017.01.033 ↗
19. Khalaf, H.I., Al-Sabur, R., Abdullah, M.E., Kubit, A., and Derazkola, H.A. (2022). Effects of Underwater Friction Stir Welding Heat Generation on Residual Stress of AA6068-T6 Aluminum Alloy. Materials, 15.10.3390/ma15062223 ↗
20. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements10.1016/j.commatsci.2005.07.007 ↗
21. Influence of deposition sequence on welding residual stress and deformation in an austenitic stainless steel J-groove welded joint10.1016/j.matdes.2013.02.065 ↗
22. Influence of annealing temperature on calculation accuracy of welding residual stress in a SUS304 stainless steel joint
23. A new finite element model for welding heat sources10.1007/BF02667333 ↗
24. 3D modelling of a multi pass dissimilar tube welding and post weld heat treatment of nickel based alloy and chromium steel10.1016/j.ijpvp.2010.08.010 ↗
25. Research on microstructure and hardness prediction method of Q345 steel welded joints based on SH-CCT Diagram
26. Thermo-metallurgical and thermo-mechanical computations for laser welded joint in 9Cr–1Mo(V, Nb) ferritic/martensitic steel10.1016/j.matdes.2014.02.046 ↗
27. Residual stress simulation in welded sections of P91 pipes10.1016/j.jmatprotec.2005.05.036 ↗
28. Comparing the Johnson–Mehl–Avrami–Kolmogorov equations for isothermal and linear heating conditions10.1016/S0040-6031(01)00584-6 ↗
29. Unified transformation-thermoplasticity and the application10.2472/jsms.56.352 ↗
30. Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases10.1016/0749-6419(89)90001-6 ↗
31. Numerical calculation and experimental measurement of temperatures and welding residual stresses in a thick-walled T-joint structure10.1007/s10973-019-09231-3 ↗
32. Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates10.1016/j.marstruc.2010.05.002 ↗
33. Investigation of welding residual stress distribution in a thick-plate joint with an emphasis on the features near weld end-start10.1016/j.matdes.2014.11.037 ↗