Comparative Finite Element Analysis of Fatigue Crack Growth in High-Performance Metallic Alloys: Influence of Material Parameters and Paris Law Constants
Source abstract
Abstract
This study presents a comparative analysis of fatigue crack growth (FCG) in four high-performance crystalline metallic alloys: Inconel 718, Ti-6Al-4V, Aluminum 7075-T6, and ASTM A514 Steel. The Finite Element Method was utilized to simulate crack propagation and quantify the individual and synergistic effects of key material properties, including Paris Law constants (C and m), yield strength, and modulus of elasticity, on FCG behavior. The analysis integrates simulation-driven parametric studies to quantify the impact on performance indicators (fatigue life cycles, equivalent stress intensity factors, safety factors, von Mises stress, and strain energy), and provides a quantitative analysis of secondary parameters. The results provide a robust, data-driven framework for material selection in aerospace, industrial, and structural applications where fatigue life is a paramount design consideration. Key findings reveal that Inconel 718 exhibits vastly superior fatigue life which is approximately 15 times greater than the next best-performing material, ASTM A514 Steel. Conversely, Ti-6Al-4V demonstrated the lowest fatigue resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, College of Engineering and Computer Sciences, Jazan University, Jazan 45142, Saudi Arabia
Funding
Deanship of Graduate Studies and Scientific Research, Jazan University
References (46)
Show source-provided references
1. An overview of fatigue in aircraft structures10.1111/ffe.12631 ↗
2. Stephens, R.I., Fatemi, A., Stephens, R.R., and Fuchs, H.O. (2000). Metal Fatigue in Engineering, John Wiley & Sons.
3. Manson, S.S.a.H., and Gary, R. (2006). Fatigue and Durability of Structural Materials, Asm International.10.31399/asm.tb.fdsm.9781627083447 ↗
4. Prediction of fatigue crack growth rate in aircraft aluminum alloys using optimized neural networks10.1016/j.tafmec.2021.103196 ↗
5. Shiraiwa, T., Briffod, F., and Enoki, M. (2023). Prediction of fatigue crack initiation of 7075 aluminum alloy by crystal plasticity simulation. Materials, 16.10.3390/ma16041595 ↗
6. Alshoaibi, A.M., and Bashiri, A.H. (2023). Fatigue Crack Growth Studies under Mixed-Mode Loading in AISI 316 Stainless Steel. Appl. Sci., 13.10.3390/app13169446 ↗
7. Nickel and its Alloys
8. Fatigue crack growth characterization of Inconel 718 after additive manufacturing by laser powder bed fusion and heat treatment10.1016/j.ijfatigue.2022.107287 ↗
9. Effect of oxidation on high temperature fatigue crack initiation and short crack growth in Inconel 718
10. Song, Z., Gao, W., Wang, D., Wu, Z., Yan, M., Huang, L., and Zhang, X. (2021). Very-high-cycle fatigue behavior of Inconel 718 alloy fabricated by selective laser melting at elevated temperature. Materials, 14.10.3390/ma14041001 ↗
11. Improved properties of additively prepared Inconel 718 alloy post-processed with a new heat treatment10.1016/j.msea.2024.146930 ↗
12. Zhong, L., Hu, H., Liang, Y., and Huang, C. (2018). High cycle fatigue performance of inconel 718 alloys with different strengths at room temperature. Metals, 9.10.3390/met9010013 ↗
13. Heat treatments of Inconel 718 nickel-based superalloy: A Review
14. Neikter, M., Colliander, M., de Andrade Schwerz, C., Hansson, T., Åkerfeldt, P., Pederson, R., and Antti, M.-L. (2020). Fatigue crack growth of electron beam melted Ti-6Al-4V in high-pressure hydrogen. Materials, 13.10.3390/ma13061287 ↗
15. Kalluri, S. (1988). Characterization of Fatigue Crack Initiation and Propagation in Ti-6Al-4V with Electrical Potential Drop Technique, National Aeronautics and Space Administration.
16. Effect of surface roughness on fatigue strength of Ti-6Al-4V alloy manufactured by additive manufacturing10.1016/j.prostr.2019.12.032 ↗
17. Wu, Y., He, W., Ma, H., Nie, X., Liang, X., Pan, J., Wang, S., Shang, M., and Cheng, L. (2024). Titanium alloy materials with very high cycle fatigue: A review. Materials, 17.10.3390/ma17122987 ↗
18. Continuum damage mechanics-based fatigue life prediction of L-PBF Ti-6Al-4V10.1016/j.ijmecsci.2024.109233 ↗
19. Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts10.1007/s40194-023-01604-5 ↗
20. Investigation of fatigue cracking in aluminium 7075 alloys and the role of heat treatment
21. Zichil, V., Grigoras, C.C., and Ciubotariu, V.A. (2024). Notches and Fatigue on Aircraft-Grade Aluminium Alloys. Materials, 17.10.3390/ma17184639 ↗
22. Xie, C., Sun, T., Li, L., and Zheng, Z. (2024). Effect of Microstructure on Fatigue Damage Accumulation in 7075 Aluminum Alloy Subjected to a Single Compressive Overload. Metals, 14.10.3390/met14090980 ↗
23. Optimizing high cycle fatigue predictions in notched Al 7075-T6: An analytical approach to rotating bending behavior10.1016/j.rineng.2024.103623 ↗
24. Schichtel, J., Datta, S., and Chattopadhyay, A. (January, January 11–15,). Study of crack initiation and failure mechanisms in Al 7075 T6 alloy under ultrasonic fatigue. Proceedings of the AIAA Scitech 2021 Forum, Nashville, TN, USA.10.2514/6.2021-1275 ↗
25. Hunt, E.M. (2013). Crack Initiation and Growth Behavior at Corrosion Pit in 7075-T6 High Strength Aluminum Alloy. [Master’s Thesis, AFIT]. Available online: https://scholar.afit.edu/etd/829.
26. Gdoutos, E., and Konsta-Gdoutos, M. (2024). Fatigue and Environment-Assisted Testing. Mechanical Testing of Materials, Springer.10.1007/978-3-031-45990-0 ↗
27. Computational crack propagation modeling of welded structures under as-welded and high frequency mechanical impact (HFMI) treatment conditions10.1111/ffe.13619 ↗
28. Analysis of failure characteristics of screen plates of ring hammer crusher used in coal handling applications10.1016/j.engfailanal.2024.108351 ↗
29. Barsom, J. (1973). Fatigue-crack growth under variable-amplitude loading in ASTM A514-B steel. Progress in Flaw Growth and Fracture Toughness Testing, ASTM International.10.1520/STP49640S ↗
30. Connor, R.J., and Lloyd, J.B. (2017). Maintenance Actions to Address Fatigue Cracking in Steel Bridge Structures, Purdue University.10.5703/1288284316552 ↗
31. Suresh, S. (1998). Fatigue of Materials, Cambridge University Press. [2nd ed.].10.1017/CBO9780511806575 ↗
32. Alshoaibi, A.M. (2021). Computational Simulation of 3D Fatigue Crack Growth under Mixed-Mode Loading. Appl. Sci., 11.10.3390/app11135953 ↗
33. Alshoaibi, A.M. (2023). Fatigue Crack Growth Analysis in Modified Compact Tension Specimen with Varying Stress Ratios: A Finite Element Study. Appl. Sci., 13.10.3390/app132413160 ↗
34. Alshoaibi, A.M., and Fageehi, Y.A. (2020). Numerical analysis of fatigue crack growth path and life predictions for linear elastic material. Materials, 13.10.3390/ma13153380 ↗
35. Alshoaibi, A.M., and Fageehi, Y.A. (2023). Numerical Analysis on Fatigue Crack Growth at Negative and Positive Stress Ratios. Materials, 16.10.3390/ma16103669 ↗
36. Bjørheim, F. (2019). Practical Comparison of Crack Meshing in ANSYS Mechanical APDL 19.2, University of Stavanger.
37. ANSYS (2020). Academic Research Mechanical, Release 19.2, Help System. Coupled Field Analysis Guide, ANSYS, Inc.
38. A model for fatigue crack growth in the paris regime under the variability of cyclic hardening and elastic properties10.1515/fas-2017-0010 ↗
39. Mixed-mode fatigue crack growth prediction in biaxially stretched sheets10.1016/0013-7944(92)90115-U ↗
40. An Abaqus implementation of the extended finite element method10.1016/j.engfracmech.2008.10.015 ↗
41. Fageehi, Y.A., and Alshoaibi, A.M. (2025). Enhancing Fatigue Life Prediction Accuracy: A Parametric Study of Stress Ratios and Hole Position Using SMART Crack Growth Technology. Crystals, 15.10.3390/cryst15070596 ↗
42. Fatigue crack propagation behaviour of inconel 718 structures built using directed energy deposition based laser additive manufacturing10.1016/j.matlet.2020.128241 ↗
43. Majchrowicz, K., Chmielewska, A., Wysocki, B., Przybysz-Gloc, S., Kulczyk, M., Garbacz, H., and Pakieła, Z. (2023). The Effect of Microstructural Defects on High-Cycle Fatigue of Ti Grade 2 Manufactured by PBF-LB and Hydrostatic Extrusion. Crystals, 13.10.3390/cryst13081250 ↗
44. Soni, S. (2024). Numerical Modelling of Crack Growth Path in Linear Elastic Materials. Fracture Behavior of Nanocomposites and Reinforced Laminate Structures, Springer.10.1007/978-3-031-68694-8_7 ↗
45. Cheng, Z., and Wang, H. (2017). A novel X-FEM based fast computational method for crack propagation. arXiv.
46. An eXtended finite element method implementation in COMSOL multiphysics: Solid mechanics10.1016/j.finel.2021.103707 ↗