Microstructural Evolution and Strengthening of Dual-Phase Stainless Steel S32750 during Heavily Cold Drawing

S32750 dual-phase stainless steel (DSS) wires were prepared by cold drawing with a strain of ε = 0~3.6. The mechanical behavior and microstructural evolution of these DSS wires at different strains were investigated. Specifically, the yield strength and ultimate tensile strength of a S32750 DSS wire at a strain of ε = 3.6 reached 1771 MPa and 1952 MPa, respectively. The microstructure of the wire was transformed into a heterogeneous microstructure, which consisted of ferrite fiber grains and a nanofibrous grain structure consisting of austenite and strain-induced martensite nanofiber grains. A sub-grain structure was observed inside the ferrite fiber. The austenitic phase followed the evolutionary steps of stacking faults, twinning, ε-martensite, α-martensite, and, finally, austenite, before transitioning into a nanofibrous grain structure. This nanofibrous grain structure significantly contributed to the strength compared with the relatively coarse ferrite phase.