Microstructure and Mechanical Properties of Hybrid Pure Al/B4C/Microsilica Composites Produced by Ultrasonically Assisted Stir Casting
Source abstract
Abstract
This study explores the fabrication and characterization of hybrid aluminum matrix composites reinforced with boron carbide (B4C) and microsilica, produced via ultrasonically assisted stir casting followed by T6 heat treatment. Pure aluminum was selected as the base matrix to evaluate the combined effects of B4C and microsilica reinforcements. Microstructural analyses showed that ultrasonic treatment effectively dispersed nanoparticles, reduced agglomeration, and enhanced particle–matrix interfacial bonding. T6 heat treatment further refined the grain structure through Zener pinning and promoted the formation of reaction layers at particle interfaces. Mechanical testing revealed that Al/B4C composites provided the highest strength and hardness, while Al/microsilica systems retained superior ductility. The hybrid Al/B4C/microsilica composites demonstrated a balanced combination of yield strength (38.6 MPa), ultimate tensile strength (82.6 MPa), and elongation (35.2%), confirming a synergistic strengthening–toughening effect. These results highlight the potential of Al/B4C/microsilica hybrid reinforcements to optimize the trade-off between strength and ductility in aluminum-based composites.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Technological Machines and Transportation, Karaganda Industrial University, Temirtau 101400, Kazakhstan
Department of Economics and Business, Karaganda Industrial University, Temirtau 101400, Kazakhstan
Department of Energy, Karaganda Industrial University, Temirtau 101400, Kazakhstan
Department of Metallurgy and Materials Science, Karaganda Industrial University, Temirtau 101400, Kazakhstan
Funding
Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
References (70)
Show source-provided references
1. Ujah, C.O., and Kallon, D.V.V. (2022). Trends in Aluminium Matrix Composite Development. Crystals, 12.10.3390/cryst12101357 ↗
2. Kar, A., Sharma, A., and Kumar, S. (2024). A Critical Review on Recent Advancements in Aluminium-Based Metal Matrix Composites. Crystals, 14.10.3390/cryst14050412 ↗
3. Patel, S.K., and Shi, L. (2025). Recent Advances in Ceramic-Reinforced Aluminum Metal Matrix Composites: A Review. Alloys, 4.10.3390/alloys4030018 ↗
4. A Unified Model for the Prediction of Yield Strength in Particulate-Reinforced Metal Matrix Nanocomposites10.3390/ma8085138 ↗
5. Singhal, V., Shelly, D., Babbar, A., Lee, S.-Y., and Park, S.-J. (2024). Review of Wear and Mechanical Characteristics of Al-Si Alloy Matrix Composites Reinforced with Natural Minerals. Lubricants, 12.10.3390/lubricants12100350 ↗
6. Abishkenov, M., Tavshanov, I., Lutchenko, N., Amanzholov, N., Kalmyrzayev, D., Ashkeyev, Z., Nogaev, K., Kydyrbayeva, S., and Abdirashit, A. (2024). Improving Mechanical Properties of Low-Quality Pure Aluminum by Minor Reinforcement with Fine B4C Particles and T6 Heat Treatment. Appl. Sci., 14.10.3390/app142310773 ↗
7. Mechanical Properties and Microstructural Investigation of AA2024-T6 Reinforced with Al2O3 and SiC Metal Matrix Composites10.3390/eng5040157 ↗
8. Ananiadis, E.A., Karantzalis, A.E., Sfikas, A.K., Georgatis, E., and Matikas, T.E. (2023). Aluminium Matrix Composites Reinforced with AlCrFeMnNi HEA Particulates: Microstructure, Mechanical and Corrosion Properties. Materials, 16.10.3390/ma16155491 ↗
9. Blanco, D., Rubio, E.M., Lorente-Pedreille, R.M., and Sáenz-Nuño, M.A. (2022). Sustainable Processes in Aluminium, Magnesium, and Titanium Alloys Applied to the Transport Sector: A Review. Metals, 12.10.3390/met12010009 ↗
10. Influence of aluminum alloys on protection performance of metal matrix composite armor reinforced with ceramic particles under ballistic impact10.1016/j.ceramint.2023.07.046 ↗
11. Okokpujie, I.P., and Tartibu, L.K. (2023). Aluminum Alloy Reinforced with Agro-Waste, and Eggshell as Viable Material for Wind Turbine Blade to Annex Potential Wind Energy: A Review. J. Compos. Sci., 7.10.3390/jcs7040161 ↗
12. Abishkenov, M., Tavshanov, I., Lutchenko, N., Nogayev, K., Ashkeyev, Z., and Kulidan, S. (2025). Microstructural Evolution and Mechanical Properties of Hybrid Al6060/TiB2–MWCNT Composites Fabricated by Ultrasonically Assisted Stir Casting and Radial-Shear Rolling. Appl. Sci., 15.10.3390/app151910427 ↗
13. A summary of current advancements in hybrid composites based on aluminium matrix in aerospace applications10.1016/j.hybadv.2023.100117 ↗
14. Boppana, S.B., Dayanand, S., Murthy, B.V., Nagaral, M., Telagu, A., Kumar, V., and Auradi, V. (2021). Development and Mechanical Characterisation of Al6061-Al2O3-Graphene Hybrid Metal Matrix Composites. J. Compos. Sci., 5.10.3390/jcs5060155 ↗
15. Ashrafi, N., Mohamed Ariff, A.H., Jung, D.-W., Sarraf, M., Foroughi, J., Sulaiman, S., and Hong, T.S. (2022). Magnetic, Electrical, and Physical Properties Evolution in Fe3O4 Nanofiller Reinforced Aluminium Matrix Composite Produced by Powder Metallurgy Method. Materials, 15.10.3390/ma15124153 ↗
16. Rogers, S., Dargusch, M., and Kent, D. (2023). Impacts of Temperature and Time on Direct Nitridation of Aluminium Powders for Preparation of AlN Reinforcement. Materials, 16.10.3390/ma16041583 ↗
17. Mathimurugan, N., Vaishnav, V., Praveen Kumar, R., Boobalan, P., Nandha, S., Chenrayan, V., Shahapurkar, K., Tirth, V., Alarifi, I.M., and Eldirderi, M.M.A. (2022). Room and High Temperature Tensile Responses of Tib2-Graphene Al 7075 Hybrid Composite Processed through Squeeze Casting. Nanomaterials, 12.10.3390/nano12183124 ↗
18. A review on the production of metal matrix composites through stir casting–Furnace design, properties, challenges, and research opportunities10.1016/j.jmapro.2019.04.017 ↗
19. Casting of particle reinforced metal matrix composite by liquid state fabrication method: A review10.1016/j.rineng.2024.103152 ↗
20. Shivalingaiah, K., Nagarajaiah, V., Selvan, C.P., Kariappa, S.T., Chandrashekarappa, N.G., Lakshmikanthan, A., Chandrashekarappa, M.P.G., and Linul, E. (2022). Stir Casting Process Analysis and Optimization for Better Properties in Al-MWCNT-GR-Based Hybrid Composites. Metals, 12.10.3390/met12081297 ↗
21. Sharma, S.K., Gajević, S., Sharma, L.K., Pradhan, R., Sharma, Y., Miletić, I., and Stojanović, B. (2024). Progress in Aluminum-Based Composites Prepared by Stir Casting: Mechanical and Tribological Properties for Automotive, Aerospace, and Military Applications. Lubricants, 12.10.3390/lubricants12120421 ↗
22. Wang, Y., and Zhang, J. (2023). A Review of the Friction and Wear Behavior of Particle-Reinforced Aluminum Matrix Composites. Lubricants, 11.10.3390/lubricants11080317 ↗
23. Yadav, P., Ranjan, A., Kumar, H., Mishra, A., and Yoon, J. (2021). A Contemporary Review of Aluminium MMC Developed through Stir-Casting Route. Materials, 14.10.3390/ma14216386 ↗
24. Riedel, E., Liepe, M., and Scharf, S. (2020). Simulation of Ultrasonic Induced Cavitation and Acoustic Streaming in Liquid and Solidifying Aluminum. Metals, 10.10.3390/met10040476 ↗
25. Zhang, Y., Li, R., Li, X., Yang, Y., Chen, P., Dong, F., and Jiang, R. (2018). Possible Effects and Mechanisms of Ultrasonic Cavitation on Oxide Inclusions during Direct-Chill Casting of an Al Alloy. Metals, 8.10.3390/met8100814 ↗
26. Dybalska, A., Caden, A., Griffiths, W.D., Nashwan, Z., Bojarevics, V., Djambazov, G., Tonry, C.E.H., and Pericleous, K.A. (2021). Enhancement of Mechanical Properties of Pure Aluminium through Contactless Melt Sonicating Treatment. Materials, 14.10.3390/ma14164479 ↗
27. Li, Z., Jiang, R., Li, X., Jia, X., and Zhang, L. (2020). Microstructural Evolution and Wear Behavior of SiCp/7085 Composites Manufactured by Ultrasonic Stirring Casting. Metals, 10.10.3390/met10050650 ↗
28. Abishkenov, M., Tavshanov, I., Lutchenko, N., Nogayev, K., Ashkeyev, Z., and Kulidan, S. (2025). Microstructure and Mechanical Properties of Al6060/TiB2 Aluminum Matrix Composites Produced via Ultrasonically Assisted Stir Casting and Radial-Shear Rolling. J. Manuf. Mater. Process., 9.10.3390/jmmp9090309 ↗
29. Zubcak, M., Soltes, J., Zimina, M., Weinberger, T., and Enzinger, N. (2021). Investigation of Al-B4C Metal Matrix Composites Produced by Friction Stir Additive Processing. Metals, 11.10.3390/met11122020 ↗
30. Liu, Y., Xie, J., Peng, H., Liu, C., Ma, D., and Leng, Y. (2025). Effects of Boron Addition on Microstructure and Mechanical Properties of B4C/Al Composites Fabricated by Pressureless Infiltration. Metals, 15.10.3390/met15080919 ↗
31. Shin, S., Lee, D., Lee, Y.-H., Ko, S., Park, H., Lee, S.-B., Cho, S., Kim, Y., Lee, S.-K., and Jo, I. (2019). High Temperature Mechanical Properties and Wear Performance of B4C/Al7075 Metal Matrix Composites. Metals, 9.10.3390/met9101108 ↗
32. Madhukar, P., Mishra, V., Selvaraj, N., Rao, C.S.P., Gonal Basavaraja, V.K., Seetharam, R., Chavali, M., Mohammad, F., and Soleiman, A.A. (2022). Influence of ultrasonic vibration towards the Microstructure Refinement and Particulate Distribution of AA7150-B4C Nanocomposites. Coatings, 12.10.3390/coatings12030365 ↗
33. Samal, P., Raj, H., Meher, A., Surekha, B., Vundavilli, P.R., and Sharma, P. (2024). Synergistic Effect of B4C and Multi-Walled CNT on Enhancing the Tribological Performance of Aluminum A383 Hybrid Composites. Lubricants, 12.10.3390/lubricants12060213 ↗
34. Tasci, U. (2025). Microstructure, Mechanical Strength, and Tribological Behavior of B4C/WS2-Hybrid-Reinforced B319 Aluminum Matrix Composites. Lubricants, 13.10.3390/lubricants13060247 ↗
35. Malaki, M., Fadaei Tehrani, A., Niroumand, B., and Gupta, M. (2021). Wettability in Metal Matrix Composites. Metals, 11.10.3390/met11071034 ↗
36. Abishkenov, M., Tavshanov, I., Lutchenko, N., Nogaev, K., Kalmyrzayev, D., Abdirashit, A., and Aikenbayeva, N. (2025). Effect of Minor Reinforcement with Ultrafine Industrial Microsilica Particles and T6 Heat Treatment on Mechanical Properties of Aluminum Matrix Composites. Appl. Sci., 15.10.3390/app15031329 ↗
37. Dash, S.S., and Chen, D. (2023). A Review on Processing–Microstructure–Property Relationships of Al-Si Alloys: Recent Advances in Deformation Behavior. Metals, 13.10.3390/met13030609 ↗
38. Msebawi, M.S., Leman, Z., Shamsudin, S., Tahir, S.M., Jaafar, C.N.A., Ariff, A.H.M., Zahari, N.I., and Rady, M.H. (2021). The Effects of CuO and SiO2 on Aluminum AA6061 Hybrid Nanocomposite as Reinforcements: A Concise Review. Coatings, 11.10.3390/coatings11080972 ↗
39. Baisanov, A., Vorobkalo, N., Shabanov, Y., Zobnin, N., Baisanova, A., Sharieva, S., Akuov, A., Samuratov, Y., Ibrakhimova, Z., and Zhumagaliev, T. (2024). Optimization of the Properties of Microsilica-Based Composite Briquettes Depending on Their Granulometry. J. Compos. Sci., 8.10.20944/preprints202408.1966.v1 ↗
40. Baisanov, A., Vorobkalo, N., Shabanov, Y., Mussin, A., Sharieva, S., and Makishev, A. (2024). Test Results of Crystalline Silicon Melting Process from Briquetted Monocharge Obtained from Microsilica. Processes, 12.10.20944/preprints202408.0533.v1 ↗
41. Sakir, S., Raman, S.N., Safiuddin, M., Kaish, A.B.M.A., and Mutalib, A.A. (2020). Utilization of By-Products and Wastes as Supplementary Cementitious Materials in Structural Mortar for Sustainable Construction. Sustainability, 12.10.3390/su12093888 ↗
42. Zhao, C., Li, B., Li, K., and Li, Z. (2024). Research on Mechanical Properties of Silica Fume Cementitious Materials Excited by Wet Grinding Methods. Buildings, 14.10.3390/buildings14123757 ↗
43. Harper, M. (2020). Recent Advances in Occupational Exposure Assessment of Aerosols. Int. J. Environ. Res. Public Health, 17.10.3390/ijerph17186820 ↗
44. Microstructural evolution and mechanical properties of TiB2/2195 composites fabricated by ultrasonic-assisted in-situ casting10.1016/j.ultsonch.2022.106203 ↗
45. Kareem, A., Qudeiri, J.A., Abdudeen, A., Ahammed, T., and Ziout, A. (2021). A Review on AA 6061 Metal Matrix Composites Produced by Stir Casting. Materials, 14.10.3390/ma14010175 ↗
46. Zhukov, I.A., Kozulin, A.A., Khrustalyov, A.P., Kahidze, N.I., Khmeleva, M.G., Moskvichev, E.N., Lychagin, D.V., and Vorozhtsov, A.B. (2019). Pure Aluminum Structure and Mechanical Properties Modified by Al2O3 Nanoparticles and Ultrasonic Treatment. Metals, 9.10.3390/met9111199 ↗
47. Enhanced mechanical properties of AA6061-B4C composites developed by a novel ultra-sonic assisted stir casting
48. Structure and properties of modified compocast microsilica reinforced aluminum matrix composite10.1016/j.matdes.2015.08.110 ↗
49. New Methods of Obtaining Al–Si Alloys Using Amorphous Microsilica
50. On the possibility of implementing a simple shear in the cross-section of metal materials during caliber rolling10.5267/j.esm.2023.3.004 ↗
51. Parasuraman, B., and Michael, A.X. (2025). Effect of T6 Tempering on the Wear and Corrosive Properties of Graphene and B4C Reinforced Al6061 Matrix Composites. J. Manuf. Mater. Process., 9.10.3390/jmmp9030082 ↗
52. Konstanty, J., and Tyrala, D. (2024). Particle Sizing and Surface Area Measurements: A Comparative Assessment of Commercial Air Permeability and Laser Light Diffraction Instruments. Appl. Sci., 14.10.3390/app14114802 ↗
53. (2021). Standard Test Methods for Tension Testing of Metallic Materials (Standard No. ASTM E8/E8M-16ae1).
54. (2022). Standard Test Method for Microindentation Hardness of Materials (Standard No. ASTM E384-22).
55. Krupiński, M., Gruszka, M., Pakieła, W., Labisz, K., and Wierzbicki, Ł. (2025). Crystallization Kinetics of Sr-Modified Precipitation Hardening Al-Si-Cu Alloys. Appl. Sci., 15.10.3390/app15031371 ↗
56. Mrówka-Nowotnik, G., Boczkal, G., and Nabel, D. (2025). Kinetics of Precipitation Hardening Phases in Recycled 2017A Aluminum Alloy. Materials, 18.10.20944/preprints202502.0409.v1 ↗
57. Czerwinski, F. (2020). Thermal Stability of Aluminum Alloys. Materials, 13.10.3390/ma13153441 ↗
58. Zeybek, Y., Kayış, C., and Diler, E.A. (2025). Improving Electrical Conductivity of Commercially Pure Aluminium: The Synergistic Effect of AlB8 Master Alloy and Heat Treatment. Materials, 18.10.3390/ma18020364 ↗
59. Phase-field study of zener drag and pinning of cylindrical particles in polycrystalline materials10.1016/j.actamat.2015.10.045 ↗
60. Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano-Sized Particles10.1002/adem.201701089 ↗
61. Zupanič, F., Žist, S., Albu, M., Letofsky-Papst, I., Burja, J., Vončina, M., and Bončina, T. (2023). Dispersoids in Al-Mg-Si Alloy AA 6086 Modified by Sc and Y. Materials, 16.10.3390/ma16082949 ↗
62. Al-Fadhalah, K., and Asi, F. (2018). Aging Behavior of Aluminum Alloy 6082 Subjected to Friction Stir Processing. Crystals, 8.10.3390/cryst8090337 ↗
63. Kuczek, Ł., Żaba, K., Trzepieciński, T., Wąsikowski, M., Balcerzak, M., and Sitek, R. (2025). Influence of Heat Treatment on Properties and Microstructure of EN AW-6082 Aluminium Alloy Drawpieces After Single-Point Incremental Sheet Forming. Appl. Sci., 15.10.3390/app15020783 ↗
64. Singhal, V., Shelly, D., Saxena, A., Gupta, R., Verma, V.K., and Jain, A. (2025). Study of the Influence of Nanoparticle Reinforcement on the Mechanical and Tribological Performance of Aluminum Matrix Composites—A Review. Lubricants, 13.10.3390/lubricants13020093 ↗
65. Emadinia, O., Vieira, M.T., and Vieira, M.F. (2018). Effect of Reinforcement Type and Dispersion on the Hardening of Sintered Pure Aluminium. Metals, 8.10.3390/met8100786 ↗
66. Dong, S., Yuan, H., Cheng, X., Zhao, X., Yang, M., Fan, Y., and Cao, X. (2020). Improved Friction and Wear Properties of Al6061-Matrix Composites Reinforced by Cu-Ni Double-Layer-Coated Carbon Fibers. Metals, 10.10.3390/met10111542 ↗
67. Rativa-Parada, W., and Nilufar, S. (2024). Influence of Heat Treatment on Microstructure, Mechanical Properties, and Damping Behavior of 2024 Aluminum Matrix Composites Reinforced by Carbon Nanoparticles. Nanomaterials, 14.10.3390/nano14161342 ↗
68. Chattrakul, K., Sornsuwit, N., and Muangnoy, P. (2024). Effect of Heat Treatment on Mechanical Properties and Thermal Expansion of Al6063-SiC-Graphite, Molybdenum Disulfide Hybrid Composite. Processes, 12.10.3390/pr12112464 ↗
69. García Arango, N., Schuster, R., Abart, R., and Povoden-Karadeniz, E. (2025). Microanalysis-Based Simulation of Heterogeneous Dispersoid Distribution in an Al Alloy After the Homogenization Stage. Crystals, 15.10.3390/cryst15080695 ↗
70. Gomes, R., Soares, G., Madureira, R., Silva, R.P., Silva, J., Neto, R., Reis, A., and Fernandes, C. (2024). Development of Heat Treatments for Structural Parts in Aluminium Alloys Produced by High-Pressure Die Casting (HPDC). Metals, 14.10.3390/met14091059 ↗