Study on Mechanism of Glass Molding Process for Fingerprint Lock Glass Plates
Source abstract
Abstract
Curved glass is widely used in 3C industry, and the market demand is increasing gradually. Glass molding process (GMP) is a high-precision, high-efficiency 3D glass touch panel processing technology. In this study, the processing parameters of fingerprint lock glass panels were deeply analyzed. This paper first introduces the molding process of the glass panel, discusses the glass forming device, and explains the heat conduction principle of the glass. Firstly, it introduces the forming process of the glass panel, discusses the glass forming device, and explains the heat conduction principle of the glass. Secondly, the simulation model of a fingerprint lock glass plate was simulated by MSC. Marc software. The stress relaxation model and structure relaxation model are used in the model, and the heat transfer characteristics of glass mold are combined to accurately predict the forming process of glass components. The effects of molding temperature, heating rate, holding time, molding pressure, cooling rate and other process parameters on product quality characteristics (residual stress and shape deviation) were analyzed through simulation experiments. The results show that, in a certain range, the residual stress is inversely proportional to the bending temperature and heating rate, and is directly proportional to the cooling rate, while the shape deviation decreases with the increase of temperature and heating rate. When the cooling rate decreases, the shape deviation first decreases and then increases. Furthermore, a verification experiment is designed to verify the reliability of the simulation results by measuring and calculating the surface roughness of the formed products.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Additive Manufacturing and 3D Printing Technologies · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electromechanical Science and Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China
Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization, Guangdong HUST Industrial Technology Research Institute, Dongguan 523808, China
State Key Lab of Digital Manufacturing Equipment Technology, School of Mechanical Science and Engineering, Huazhong University of Science Technology, Wuhan 430074, China
Funding
National Natural Science Foundation of China (NSFC) · Natural Science Foundation of Guangdong Province · Research Team Project of Guangdong Pearl River Talents Program
References (38)
Show source-provided references
1. On the New challenges of fingerprint identification technology
2. Xin, Q. (2005). Manufacturing Technology of Optical Plastic Aspheric Surface, National Defence Industrial Press.
3. Development and application of optical glass
4. Chen, M. (2011). Research on ultra-precision aspheric grinding technology, Harbin Inst.
5. Viscoelastic properties of chalcogenide glasses and the simulation of their molding processes10.1016/j.phpro.2011.06.186 ↗
6. Zhao, Y., and Yi, H. (2006). Glass Technology, Chemical IndustryPress.
7. Wang, Y. (2011). Numerical Simulation of Ultra-Precision Molding of Aspheric Optical Glass Lens, Hunan University.
8. Huo, J. (2011). Numerical Simulation and Simulation of Stress State and Molding Shape of Aspheric Glass Lens, Hunan University.
9. Xie, W. (2016). Numerical Simulation Analysis of Die Forming Of Microstructure Optical Element, Hunan University.
10. Yin, S., Huo, J., and Zhou, T. (2011). Simulation of Heating and Pressure Parameters in Molding of Small Aperture Aspheric Lens, Hunan University.
11. Finite element modelling of stress relaxation in glass lens moulding using measured, temperature-dependent elastic modulus and viscosity data of glass10.1088/0965-0393/14/3/009 ↗
12. A comprehensive review of electric discharge machining of advanced ceramics10.1016/j.ceramint.2020.05.207 ↗
13. Modeling high-temperature glass molding process by coupling heat transfer and viscous deformation analysis10.1016/j.precisioneng.2008.05.005 ↗
14. Curan, A., Gocalinska, A., and Pescaglini, A. (2021). Structural and Electronic Properties of Polycrystalline InAs Thin Films Deposited on Silicon Dioxide and Glass at Temperatures below 500 °C. Crystals, 11.10.3390/cryst11020160 ↗
15. Tao, B., and Yuan, Y. (2017, January 22–24). FEM simulation of the effect of coefficient of thermal expansion and heat capacity on prediction of residual stresses of compression molded glass lenses. Proceedings of the 2017 4th International Conference on Advanced Materials, Mechanics and Structural Engineering (4th AMMSE 2017), Tianjin, China.
16. Analysis of annealing processes of glass sheets based on structural relaxation model10.1016/j.ijmecsci.2012.11.015 ↗
17. Blair, G., and Clarence, C. (1974). Method for Molding Glass Lens. (3833347), U.S. Patent.
18. Rediscovery and Re-Expansion: Research on Glass Fusing and Slumping Process
19. Hong, J. (2005). Finite Element Analysis of Optical Glass (Micro) Hot Pressing(Ⅱ), National Chiao Tung University.
20. Zhou, S. (2016). Molding Simulation and Experimental Study of Small Aperture Aspheric Glass Lens, Hunan University.
21. Zhou, J., Shi, T., and Hu, Y. (2013, January 17–20). Numerical simulation in compression molding of glass lens. Proceedings of the 2013 IEEE International Conference on Automation Science and Engineering (CASE), Madison, WI, USA.10.1109/CoASE.2013.6653894 ↗
22. New high-precision magnetorheological instrument-based method of polishing optic
23. Review on manufacture and measurement method of aspheric surface optical part
24. Compression Molding of Aspherical Glass Lenses–A Combined Experimental and Numerical Analysis10.1111/j.1551-2916.2005.00137.x ↗
25. Experimental study of glass molding process and transcription characteristics of mold surface in molding of aspheric glass lense10.1007/s10043-011-0049-4 ↗
26. Zheng, C. (2009). Study on chalcogenide infrared glass for precision molding, Xi’an Technological University.
27. Precision molding manufacturing of small aperture thin glass lens. Infrared and laser engineering
28. Investigation of the refractive index distribution in precision compression glass molding by use of 3D tomography10.1088/0957-0233/20/5/055109 ↗
29. Characterization of the Thermo-Viscoelastic Property of Glass and Numerical Simulation of the Press Molding of Glass Lens10.1080/01495730903310557 ↗
30. Zhu, K. (2013). Numerical Simulation and Experimental Study on Molding of Optical Glass Lens, Hunan University.
31. Refractive index and dispersion variation in precision optical glass molding by computed tomography10.1364/AO.48.003588 ↗
32. Effect of glass temperature before cooling and cooling rate on residual stresses in tempering10.1007/s40940-017-0053-6 ↗
33. Numerical modeling of viscoelastic stress relaxation during glass lens forming process10.1111/j.1551-2916.2005.00114.x ↗
34. Electrolytic In-process Dressing (ELID) grinding method for ultra-precision mirror surface grinding10.2493/jjspe.59.1451 ↗
35. Development of High-Efficiency Fine Finishing Process Using Magnetic Fluid10.1016/S0007-8506(07)61412-7 ↗
36. Laser direct-write technique for fabricating microlens arrays on soda-lime glass with a Nd: YVO4 laser10.1364/AO.49.004979 ↗
37. Numerical simulation of ultra-precision molding of micro aspheric glass lens10.3788/gzxb20103911.2020 ↗
38. Multi-objective optimization of glass multi-station bending machining10.1007/s40430-019-1985-3 ↗